• 제목/요약/키워드: In-plane variation

검색결과 536건 처리시간 0.03초

TRIGA Mark-III 원자로의 노심특성계산 (Calculation of Nuclear Characteristics of the TRIGA Mark-III Reactor)

  • Chong Chul Yook;Gee Yang Han;Byung Jin Jun;Ji Bok Lee;Chang Kun Lee
    • Nuclear Engineering and Technology
    • /
    • 제13권4호
    • /
    • pp.264-276
    • /
    • 1981
  • TRIGA Mark-III 원자로의 핵특성을 실제운전상태와 유사하게 모사할 수 있는 해석절차를 개발하였다. 계산에 사용한 전산코드는 다군중성자확산 연소계산코드인 CITATION이고 채택한 중성자에너지군의 수는 TRIGA형 원자로에서 일반적으로 사용하는 7군(고속영역 3, 열영역 4)이다. 직접적인 3차원 계산이 현실적으로 불가능하므로 평면 2차원계산과 원통형 2차원 계산으로 3차원 효과를 기하였다. 연구로와 같이 노심이 작은 원자로에 대하여는 중성자평형에서 buckling에 의한 효과가 매우 크기 때문에 이를 정확하게 나타내는 방법의 개발에 중점을 두었다. 본 연구에서는 에너지군 또는 영역에 무관한 buckling을 중성자 수송이론으로 산출하는 전형적인 방법을 사용하지 않고 중성자 확산이론으로서 에너지군별, 영역별 buckling을 산출하였으며, 이를 이용하여 수행한 노심계산의 결과는 만족스러웠다. 계산시 노심은 원자로수조의 중앙부에 있는 것으로 하고 제어봉은 완전히 인출되었으며 동위원생산용 조사시료는 없는 것으로 가정하였다. 계산결과로서 연소에 따른 초과반응도가의 변화, 운전이력에 따른 Xe-135 독작용의 변화, 회전조사시료대의 반응도가를 산출하고 이를 실제 운전자료와 비교하였다. 또한 중성자속 및 출력분포, 노심 각 조사시설에서의 중성자 스펙트럼등에 대한 계산결과도 제시하였다.

  • PDF

2차원 부정류 모형을 이용한 둔치의 수리특성 분석 (Analysis of Hydraulic Characteristics of Flood Plain Using Two-Dimensional Unsteady Model)

  • 구영훈;송창근;김영도;서일원
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.997-1005
    • /
    • 2013
  • 낙동강의 횡단면은 복단면 형태를 띄고 있으므로, 여름철 집중호우에 의해서 하천유량이 증가하면 둔치 상부까지 하천수위가 상승하는 특징이 있다. 또한 최근 강우강도 및 홍수 빈도의 증가로 인해 관련 피해가 급증하고 있으며, 이는 홍수터에 설치된 공원과 같은 친수시설들의 침수피해와 직접적으로 연관되므로, 극한강우 시 둔치에서의 수리학적 영향분석이 필요하다고 판단된다. 본 연구에서는 다양한 친수시설들이 조성되어 있는 강정고령보와 달성보 사이를 모의구간으로 선정하여 태풍 산바에 의해 첨두홍수량이 발생한 시점을 전후로 총 42시간에 걸친 수치모의를 실시하였다. 2차원 부정류 모형인 FaSTMECH 모의결과와 수위관측소에서 실측된 실측수위와 비교하여 모형의 적용성을 검토한 결과 $R^2$는 0.990, AME는 0.195, RMSE는 0.252로 높은 상관관계를 보였다. 그리고 검증된 FaSTMECH 모형을 이용하여 태풍 사상 시 홍수터 내에 위치해 있는 캠핑장과 생태공원 등과 같은 친수시설이 침수되는 시간 및 침수심, 침수 유속 및 전단력 등을 분석하였다.

종이 의상에 관한 연구 - 수제지를 중심으로 - (A Study on the Paper Clothing -on the basis of handmade paper-)

  • 이주실;김정혜
    • 복식
    • /
    • 제44권
    • /
    • pp.181-199
    • /
    • 1999
  • The industry of modern clothing has deviated from the overflow of commercialism and the standardization and nowadays is going toward pursuing art, creativity, and high added value. This trend brings the return of the natural materials from the synthetic textiles and increases the value of old and handmade fabrics. Finally, the handmade-paper, which is a natural material, comes to be reconsidered as a new material for the clothing. Therefore, as the natural materials and the manufacture of handmade clothing are rising again, the qualitative improvement and globalization of clothing industry should be first realized through the developments of creative and various clothing materials and new expressing techniques. The above investigation and study have been synthesized and analyzed as follows: First, through the study on the origin of the paper clothing, its historical background and the process of its development, we've learned these two facts following : the paper clothing of the East in the past mostly had practiced meanings. On the other hand, in the West it had meanings which were raised the artist's emotions and beauty-consciousness to the artistic level by the various kinds of expressing methods. Second, handmade-paper was manufactured by the embedding method, which mixed mulberry pulp, gauze, corn, hair, sisal, silk and so on. It was found that handmade-paper had the affluent and proper texture as the clothing material and was be able to control the clarity through the variation of thickness. It was also confirmed that the creative and original texture with hand-worked molding beauty was obtained by the use of handmade-paper. Third, when the handmade-paper is used, the molding beauty of plane, relievo, and solid can be freely pursued, and various and effective molding conformation can be constructed by the effect of superposition and repetition. Also, because the maximum discretion from the various optional manufacturing methods is allowed, the molding beauty can be maximized when the clothes are manufactured with handmade-paper. Fourth, the gauze with strong drape was combined to overcome the stiffness and the tearing of the paper. As a result, the durability and the wearability of the paper were strengthened and thus the thus the applications as the clothing material were enlarged. In conclusion, in order to enhance the value, creativity, practicality, and artistic sense of the design for modern clothing, the clothes made of handmade-paper should be more studied. Moreover, for the generalization of paper clothes, the studies on the development of practical paper with paper with water resistance, post-treatment after dyeing, flexibility, and durability should be done. I really hope that this study will be the motive to provoke the possibility of handmade-paper as new clothing material in not only practical sense but also artistic sense.

  • PDF

전치부 개방교합의 진단과 치료 (The Diagnosis and Treatment of Anterior Openbite Malocclusion)

  • 장영일;문성철
    • 대한치과교정학회지
    • /
    • 제28권6호
    • /
    • pp.893-904
    • /
    • 1998
  • 교정적으로 치료할 수는 있지만 많은 노력을 필요로 하는 부정교합들이 존재한다. 특히, 전방 개교는 치료하기 어렵고, 많은 경우 외과적 수술을 동반하여야 한다. 이러한 문제를 해결하기 위해, 여러 치료기전에 대한 연구가 소개되었다. 제안된 치료기전들은 직접, 간접적으로 근신경계와 형태학적인 특징과 원인적 혹은 환경적 요소에 기초를 둔다. 성장 변이에 따라 안모의 수직 관계는 증가하나, 적절한 치아치조 보상기전으로 정상교합 관계가 유지된다. 그러나, 부적절하거나, 부정적인 치아치조 보상기전이 일어나는 경우 개교가 발생할 수 있다. 골격 부조화가 너무 심해 교정치료만으로 해결되기 어렵다면, 악구강계의 기능과 심미를 증진시키기 위하여 수술이 행해져야만 한다. 그러나, 많은 경우 적절한 진단과 치료계획으로 주어진 골격패턴에 알맞게 교정 치료를 변형시키면, 만족스런 결과를 얻을 수 있다. Multiloop Edgewise Arcgwire(MEAW) 기법은 주로 치아치조 영역에서 치료 변화가 일어나며, 자연적인 치아치조 보상기전과 상당한 유사성을 보인다. 다시 말해서 MEAW기법은 교정의가 자연적인 치아치조 보상을 교정적으로 유도한다고 할 수 있다. 골격 패턴에 알맞은 교정적인 치아치조 보상으로 개교를 치료했다고 해도, 자연적인 치아치조 보상을 억재해왔던 원인요소가 남아 있다면, 재발이 일어난다. 원인요소는 초진시 진단되고 치료와 보정시기에도 고려되어야한다.

  • PDF

악관절의 자기공명영상과 시상단층 방사선촬영상에 관한 비교연구 (A COMPARATIVE STUDY ONMAGNETIC RESONANCE IMAGE AND SECTOGRAPH OF HUMAN TNJ)

  • 이성복;최대균;최부병
    • 대한치과보철학회지
    • /
    • 제31권2호
    • /
    • pp.249-270
    • /
    • 1993
  • For understanding of anatomy, physiology, and diseases of human TMJ, it is required to evaluate quantitatively the movement of the disc and condyle head of mandible. The histologic section of cadaver TMJ were examined, and the magnification of the MR image and its details of anatomy were evaluated. And then a quantitative analytic method, by comparing the Sectograph and the MR image of vital human TMJ, was proposed. For this study, 15 subjects(Male, 24~35years) were selected from a prosthodontic examination randomly, and each subject’s five interocclusal rubber registration records were made on the ICP, and 5, 10, 15, and 20mmjaw opening positions. All subjects were radiographed with a Denar Quint Sectograph Image System(Denar Corp., USA), and imaged with a MRP-20EX MR Image System(0.2T, Permanent Magnet Type, Hitachi Medical Corp., Japan) using an 100mm diameter bilateral type surface coil. These images were traced on the acetate tracing paper, and analyzed In this study, the findings led to the following conclusions. 1. In comparison of the histologic section of autopsy specimen with the MR image at the same section, the size(dimension) of MR image was 70% of the real one. It was possible to recognize the shape of articular disc, anterior and posterior attachments, and adjacent soft tissues, because of the excellent reproducibility of anatomical structure. 2. When we compared the amount of joint space on MR image with that of joint space on sectograph, the amount of joint space on sectograph was significantly greater than that of joint space on MR image, except at the top of condylar head. 3. The position of minimum joint space on sectograph at intercuspal position didn't coincide with the middle position of articular disc on MR image, and was approximately in the anterior third of posterior band of articular disc. 4. The amount of condylar movement on MR image at opening movement was greater than that of articular disc movement. From Intercuspal position to 5mm jaw-opening movement, the condylar movement showed hinge one, and over the range 5mm jaw-opening it suggested hinge & translatory one. 5. In terms of area variation of articular disc measured on MR image in sagittal plane, the area of posterior band increased with increasing the amount of Jaw opening, but the area of anterior band decreased conversely.

  • PDF

파노라마방사선사진에서 환자의 머리 위치가 하악 수직, 수평 확대율에 미치는 영향: 상하 및 좌우회전 (Effect of head positioning on the vertical and horizontal magnification in panoramic radiographs: rotation along the sagittal and transverse plane)

  • 김용건;변진석;안서영
    • 구강회복응용과학지
    • /
    • 제30권1호
    • /
    • pp.1-8
    • /
    • 2014
  • 목적: 이 연구는 파노라마방사선사진 촬영 시 환자의 머리 위치가 상방, 하방, 좌측 및 우측으로 회전됨에 따른 수평 및 수직 확대율의 변화를 비교 평가하는 것이었다. 연구 재료 및 방법: 직경 4 mm인 금속구 5개를 건조 두개골의 하악 전치부(2개)와 우측 대구치부(3개)의 치조골 상방에 위치시켰다. 상하 및 좌우 회전량을 조절할 수 있는 두개골 고정장치에 건조 두개골을 고정시킨 후, 기준 위치와 회전된 위치에서 파노라마방사선사진을 쵤영하였다. 결과: 기준 위치에서 평균 수평 확대율은 $1.22{\pm}0.01-1.44{\pm}0.01$이었고, 평균 수직 확대율은 $1.29{\pm}0.00-1.35{\pm}0.02$였다. 전치부와 구치부 비교시 수평 확대율은 전치부에서 $1.24{\pm}0.02-1.31{\pm}0.03$, 구치부에서 $1.40{\pm}0.03-1.33{\pm}0.02$로 유의한 차이가 있었고(P < 0.05), 수직 확대율은 차이가 없었다. 위치 변화에 따른 수평 확대율은 $0.88{\pm}0.03-3.73{\pm}0.16$으로 기준 위치와 비교 시 통계적으로 유의한 차이를 보인 반면 (P < 0.05), 수직 확대율은 $1.24{\pm}0.01-1.37{\pm}0.02$로 차이가 없었다. 결론: 회전된 머리위치에서 파노라마방사선사진 촬영 시 수평 확대율의 변화가 크다.

4성분계 Cu-Fe-Sn-S의 상관관계에 대한 새로운 데이터 (New data on Phase Relations in the System Cu-Fe-Sn-S)

  • 장영남
    • 한국광물학회지
    • /
    • 제4권1호
    • /
    • pp.43-50
    • /
    • 1991
  • 四成分系 Cu-Fe-Sn-S 시스템의 相關係에 대한 합성실험에서 두 개의 固溶體 타입의 合成相$(Fe, Cu, Sn)_{1+x}S$$Cu_{2-y}Fe_{1+y}SnS_4$가 발견되었으며 이들은 成分四面體 내에서 CuS-FeS-SnS로 표시될 수 있는 reference面의 주위에서 안정한 것으로 밝혀졌다. 煎者는 섬아연석 結晶構造를 갖고 있는 단순황화물 고용체로서 온도함수인 금속과 유황의 비율(9.7-1.0/1.0)에 따라 광범위한 화학적 안정영역을 차지하고 있다. 또산 섬아연석 超格子중에 하나인 테트라헤드라이트 結晶構造를 갖고 있는 후자는 $Cu_2FeSnS_4$-FeS conode를 따라 렌즈型의 안정범위를 갖으나 subsolidus 범위(350${\circ}C$까지) 내에서 相轉移 현상이 없고 835-862${\circ}C$에서 不調和熔融을 한다. 위 두 개의 고용체는 온도변화에 따라 相互溶解度 그리고 관련된 각각의 합성상이 화학조성이 변화하는 소위 Incorporation-type Solid Solution이다. 특히 後者의 경우 섬아연석 subcell을 기본골격으로 하는 超格子의 특징적인 양상을 X-ray 연구에서 찾을 수 있으며 이 패턴을 초격자의 안전성이 높다는 것을 암시해 주고 물리, 화학적 특성이 stoichiometric phase $Cu_2FeSnS_4$와 相異하다.

  • PDF

석탄화력 발전설비의 출력에 따른 탈황 흡수탑 액기비와 황산화물 배출농도 변화에 대한 연구 (Variation of Liquid to Gas Ratio and Sulfur Oxide Emission Concentrations in Desulfurization Absorber with Coal-fired Thermal Power Plant Outputs)

  • 김기영;문승재
    • 플랜트 저널
    • /
    • 제14권4호
    • /
    • pp.39-47
    • /
    • 2018
  • 본 연구에서는 정격출력 500 MW로 연속운전 하는 표준석탄화력 발전설비의 출력을 300 ~ 500 MW로 변동운전하게 될 때 황산화물의 생성량과 탈황설비 흡수탑에서의 황산화물 배출농도 변화를 비교하고, 출력에 반비례하는 과다한 액기비 개선을 제안하였다. 저출력에서 연소효율 보정을 위해 과잉공기비를 높임에 따라 발생하는 연소가스량에 비해 상대적으로 황산화물의 비율이 낮아지기 때문에 고유황 연료일수록 고출력에서 유황성분의 생성농도가 상승하였다. 출력변동과 함께 탈황흡수탑 입구 황산화물 생성농도를 300 ~ 500 ppm으로 변화시켰을 때, 석회석 슬러리와 연소가스의 액기비는 10.99 ~ 16.27로 변화되었다. 따라서 저부하시 액기비 상승에 따른 잉여에너지저감을 위한 슬러리의 필요최소 유량은 300 MW 출력에서 황산화물 배출농도를 x라고 했을 때 다음 상관관계식을 추천한다. $y1[m^3/sec]=0.11x+3.74$

  • PDF

스핀-궤도 상호작용을 고려한 Si 불순물이 BCC Fe의 자성에 미치는 영향에 대한 제일원리연구 (A First-principles Study on the Effects on Magnetism of Si Impurity in BCC Fe by Considering Spin-orbit Coupling)

  • ;김인기;장삼규
    • 한국자기학회지
    • /
    • 제18권6호
    • /
    • pp.211-216
    • /
    • 2008
  • Si이 체심입방구조(body centered cubic; bcc) Fe에 불순물로 포함된 경우에 Fe의 전자구조와 자성에 미치는 영향을 스핀-궤도 상호작용(spin-orbit coupling, SOC)을 고려한 제일원리방법을 통하여 연구하였다. Si 불순물의 효과를 기술하기 위하여 27개의 원자가 포함된 bcc Fe 초격자 구조를 고려하였다. 제일원리방법은 전전자 총퍼텐셜선형보강평면파(all-electron full-potential linearized augmented plane wave, FLAPW) 방법을 일반기울기 근사(generalized gradient approximation, GGA) 하에서 계산하였다. 스핀-궤도 상호작용은 스핀대각항 만을 고려한 이차변분방법을 이용하여 자체충족적으로 계산하였다. SOC를 고려하지 않은 강자성(ferromagnetic, FM) 상태의 경우 Si 불순물의 경우에는 $-0.143{\mu}B$의 스핀 자기모멘트가 계산되었으며, Fe 원자가 Si 불순물에서 멀어지면서 각각 $2.214{\mu}B$, $2.327{\mu}B$, 및 $2.354{\mu}B$의 값을 얻었다. 그러나, SOC를 고려한 경우 Si 불순물의 스핀 자기모멘트는 $-0.144{\mu}B$로 계산되어 SOC의 효과가 크지 않았으나, Fe 원자의 경우 각각 $2.189{\mu}B$, $2.310{\mu}B$, 및 $2.325{\mu}B$로 계산되어 SOC를 고려한 경우 스핀 자기모멘트 값이 줄어드는 것을 알 수 있었다. 총전하 및 스핀밀도의 비교와 상태밀도의 비교를 통하여 이러한 현상은 Si 불순물에 의한 영향을 가리는데 참여하는 Fe 원자의 $t_{2g}$ 전자 궤도의 변형의 효과로서 SOC를 고려할 때만 얻을 수 있다.

탄성지반위에 놓인 S형상 점진기능재료(FGM)판의 동적 불안정성에 관한 연구 (A Study of Dynamic Instability for Sigmoid Functionally Graded Material Plates on Elastic Foundation)

  • 이원홍;한성천;박원태
    • 한국전산구조공학회논문집
    • /
    • 제28권1호
    • /
    • pp.85-92
    • /
    • 2015
  • 탄성지반위에 놓인 S형상 점진기능재료 고차전단변형 판의 동적 불안정성에 대하여 연구하였다. 고차전단변형이론은 점진기능재료 판의 두께방향으로의 전단변형률과 전단응력의 곡선변화 효과를 고려할 수 있다. Mathieu-Hill 방정식의 형태로 유도된 지배방정식에서 Bolotin 방법을 이용하여 동적 불안정 영역을 결정하였다. 동적 불안정 영역의 경계는 동적 하중과 여기진동수와의 관계로 나타내었다. 고차전단변형이론과 탄성지반 효과가 S형상 점진기능재료 판의 동적 불안정성에 미치는 효과를 제시하였다. Winkler와 Pasternak탄성지반 매개변수의 관계를 수치해석 결과를 통하여 고찰하였다. 또한 정적 하중계수, 거듭제곱 지수 그리고 폭-두께비 등의 동적 불안정 영역에 대한 영향을 분석하였다. 본 연구의 결과를 검증하기 위해 참고문헌의 결과와 비교 분석하였다. 본 연구에서 제시한 이론적 발전과 수치결과들은 S형상 점진기능재료 구조물의 동적 불안정 해석을 위한 참고자료로 활용될 수 있을 것이다.