• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.9
• /
• pp.191-198
• /
• 2019

All over the Republic of Korea, there are many masonry buildings which have been built since 1970s. When the earthquake at Po-Hang occurred, this is the main cause of huge damage because the masonry buildings have not seismic capacity. When masonry buildings are failed, two type of the failure modes can be shown, which are in-plane mode and out-plane mode. In-plane mode can have seismic capacity in masonry so diagonal shear test is performed in this study. The purpose of this study was to find the best way to reinforce the materials through the diagonal shear test. Through the test, shear stress and shear modulus of elasticity will be calculated, referred to the ASTM E 519-02. The variables in this test are ${\phi}3$ wire, three types of wire meshes, polypropylene strap and different types of brick. Each variable is applied to the same condition of the $1.2m{\times}1.2m$ masonry walls which are made by ASTM E 519-02. Compared to each variable with shear stress and shear modulus of elasticity, the best way of reinforcing method to have seismic capacity will be proved in this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.326-334
• /
• 1991

We propose an optical Asynchronous Transfer Mode(ATM) switching system using free-space optics and an output buffer memory. The distributor system in the switching fabric was analyzed using the Huygens-Fresnel principle and lens transformation. For monochromatic illumination, a pattern similar to the Fourier transform of the input distribution was observed across the output plane. A spatially broadened intensity distribution across the the output plane can be expected when the system is illminated with a partially coherent, quasimonochromatic beam. Spatially coherent pulses as short as 100fs can propagate through the distributor without severe spatial broadening.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.653-663
• /
• 2018

Patients with spinal cord injuries cannot move their limbs using their intact muscles. A suitable controller can be used to move their arms by employing the functional electrical stimulation method. In this article, a fuzzy exponential sliding-mode controller is designed to move a musculoskeletal human arm model to track an optimal trajectory in the sagittal plane. This optimal arm trajectory is obtained by developing a policy for the central nervous system. In order to specify the optimal trajectory between two points, two dynamic and static optimal criteria are applied simultaneously. The first dynamic objective function is defined to minimize the joint torques, and the second static optimization is offered to minimize the muscle forces at each moment. In addition, fuzzy logic is used to tune the sliding-surface parameter to enable an appropriate tracking performance. Simulation results are evaluated and compared with experimental data for upward and downward movements of the human arm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.629-632
• /
• 2009

We have proposed a novel viewing angle controllable display of in-plane switching (IPS) mode with single panel. One pixel of this device is divided to two regions, in which main pixel shows image and sub pixel for viewing angle control. In initial state, the liquid crystal of sub pixel is homogeneous aligned on substrate for wide viewing angle mode. On the other hand, after applying voltage, the liquid crystal of sub pixel tilts up for narrow viewing angle mode. The proposed device has advantage for the function for simple manufacturing process and good viewing angle control with single panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.453-456
• /
• 2005

Color characteristics of a dark state in the IPS-mode depending on viewing direction have been studied. IPS-mode is having a little variation of $d{\Delta}n$ with viewing angle since the LC rotates in plane. However, this mode shows asymmetric light leakage and color characteristics with viewing angle in a dark state. This drawback can be overcome by optimized retardation value of TAC film, pre-tilt angle & $d{\Delta}n$ of LC.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.314-318
• /
• 2008

We investigate the conditions of the complete tunneling of light across a composite barrier made of multiple layers involving metamaterials. It is shown that complete tunneling phenomena are related to the resonance transmission properties of local modes formed in barrier layers and that there are two distinctive kinds of local barrier modes involved in actual complete tunneling: the degenerate inner-barrier mode and the full barrier mode. Complete tunneling occurs via two successive mode couplings: from the incident plane wave to the plane wave in the transmission layer through the direct mediation of these two kinds of local barrier modes.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.10-18
• /
• 1999

An integral equation representation of cracks was presented, which differs from well-known "dislocation layer" representation. In this new representation, the integral equation representation of cracks was developed and coupled to the direct boundary-element method for treatment of cracks in finite plane bodies. The method was developed for in-plane(mode I and II) loadings only. In this paper, the method is formulated and applied to various crack problems involving multiple and branch cracks in finite region. The results are compared to exact solutions where available and the method is shown to be very accurate despite of its simplicity.implicity.

• Structural Engineering and Mechanics
• /
• v.3 no.5
• /
• pp.511-525
• /
• 1995

The differential equations governing in-plane free vibrations of the elastic, catenary arch with rotatory inertia are derived in Cartesian coordinates. Frequencies and mode shapes are computed numerically for such arches with unsymmetric axes, for both clamped-clamped and hinged-hinged end constraints. The lowest four natural frequency parameters are reported, with and without rotatory inertia, as a function of three nondimensional system parameters; the span to cord length ratio e, the slenderness ratio s, and the rise to cord length ratio f. Experimental measures of frequencies and mode shapes for several laboratory-scale catenary models serve to validate the theoretical results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.138-139
• /
• 2004

In this paper, we propose a reflective In-Plane Switching twisted nematic mode with negative liquid crystal and weak surface anchoring energy (10$^{-6}$ J/m) in order to enhance reflectance and cellgap margin.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.502-507
• /
• 2013

In this paper, a circular dual mode horn with modified aperture is proposed to improve a E/H-plane radiation pattern symmetry of a conventional oversized circular dual mode horn. The proposed antenna consists of a feeding section, a mode generation section and a phase matching section which has aperture shape transition from circle to ellipse or rectangle to improve a E/H-plane radiation pattern symmetry. To compare the performances between the proposed antenna and the convenional circular dual mode horn, the conventional circular dual mode horn and the proposed circular dual mode horn with rectangular aperture are fabricated and researched at 15 GHz. The measured results show that the conventional circular dual mode horn has 3.394 dB difference while the proposed antenna has only 0.539 dB difference between E and H-plane radiation patterns within the -11 dB beamwidth($53^{\circ}$) which is required beamwidth of the feed horn for the maximum aperture efficiency where f/d ratio of reflector antenna is 1.