• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.191-198
• /
• 2019

All over the Republic of Korea, there are many masonry buildings which have been built since 1970s. When the earthquake at Po-Hang occurred, this is the main cause of huge damage because the masonry buildings have not seismic capacity. When masonry buildings are failed, two type of the failure modes can be shown, which are in-plane mode and out-plane mode. In-plane mode can have seismic capacity in masonry so diagonal shear test is performed in this study. The purpose of this study was to find the best way to reinforce the materials through the diagonal shear test. Through the test, shear stress and shear modulus of elasticity will be calculated, referred to the ASTM E 519-02. The variables in this test are ${\phi}3$ wire, three types of wire meshes, polypropylene strap and different types of brick. Each variable is applied to the same condition of the $1.2m{\times}1.2m$ masonry walls which are made by ASTM E 519-02. Compared to each variable with shear stress and shear modulus of elasticity, the best way of reinforcing method to have seismic capacity will be proved in this study.

• 한국통신학회논문지
• /
• 제16권4호
• /
• pp.326-334
• /
• 1991

자유공간 광학과 출력 버퍼 메모리를 이용한 Optical Asynchronous Transfer Mode(ATM) 스위칭 시스템을 제안하고, Huygens-Fresnel 원리와 렌즈 변환을 이용하여 이 스위칭 구조에 있는 분배 시스템을 분석했다. 단색관 조명의 경우, 입력 분포의푸리에 변환과 유사한 패턴이 출력평면에서 관측되었다. 부분적으로 코히런트(coherent)한 유사 단색광으로 시스템을 조명할 \ulcorner\ulcorner는, 출력평면에서 단색광 때보다 공간적으로 넓어진 빛의 세기 분포가 나타났다. 100fs 정도의 코히런트(coherent)한 단펄스는 심한 공간적 확장 없이 분배기를 전파할 수 있음을 알 수 있었다.

• ETRI Journal
• /
• 제40권5호
• /
• pp.653-663
• /
• 2018

Patients with spinal cord injuries cannot move their limbs using their intact muscles. A suitable controller can be used to move their arms by employing the functional electrical stimulation method. In this article, a fuzzy exponential sliding-mode controller is designed to move a musculoskeletal human arm model to track an optimal trajectory in the sagittal plane. This optimal arm trajectory is obtained by developing a policy for the central nervous system. In order to specify the optimal trajectory between two points, two dynamic and static optimal criteria are applied simultaneously. The first dynamic objective function is defined to minimize the joint torques, and the second static optimization is offered to minimize the muscle forces at each moment. In addition, fuzzy logic is used to tune the sliding-surface parameter to enable an appropriate tracking performance. Simulation results are evaluated and compared with experimental data for upward and downward movements of the human arm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.629-632
• /
• 2009

We have proposed a novel viewing angle controllable display of in-plane switching (IPS) mode with single panel. One pixel of this device is divided to two regions, in which main pixel shows image and sub pixel for viewing angle control. In initial state, the liquid crystal of sub pixel is homogeneous aligned on substrate for wide viewing angle mode. On the other hand, after applying voltage, the liquid crystal of sub pixel tilts up for narrow viewing angle mode. The proposed device has advantage for the function for simple manufacturing process and good viewing angle control with single panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.453-456
• /
• 2005

Color characteristics of a dark state in the IPS-mode depending on viewing direction have been studied. IPS-mode is having a little variation of $d{\Delta}n$ with viewing angle since the LC rotates in plane. However, this mode shows asymmetric light leakage and color characteristics with viewing angle in a dark state. This drawback can be overcome by optimized retardation value of TAC film, pre-tilt angle & $d{\Delta}n$ of LC.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.314-318
• /
• 2008

We investigate the conditions of the complete tunneling of light across a composite barrier made of multiple layers involving metamaterials. It is shown that complete tunneling phenomena are related to the resonance transmission properties of local modes formed in barrier layers and that there are two distinctive kinds of local barrier modes involved in actual complete tunneling: the degenerate inner-barrier mode and the full barrier mode. Complete tunneling occurs via two successive mode couplings: from the incident plane wave to the plane wave in the transmission layer through the direct mediation of these two kinds of local barrier modes.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.10-18
• /
• 1999

An integral equation representation of cracks was presented, which differs from well-known "dislocation layer" representation. In this new representation, the integral equation representation of cracks was developed and coupled to the direct boundary-element method for treatment of cracks in finite plane bodies. The method was developed for in-plane(mode I and II) loadings only. In this paper, the method is formulated and applied to various crack problems involving multiple and branch cracks in finite region. The results are compared to exact solutions where available and the method is shown to be very accurate despite of its simplicity.implicity.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.511-525
• /
• 1995

The differential equations governing in-plane free vibrations of the elastic, catenary arch with rotatory inertia are derived in Cartesian coordinates. Frequencies and mode shapes are computed numerically for such arches with unsymmetric axes, for both clamped-clamped and hinged-hinged end constraints. The lowest four natural frequency parameters are reported, with and without rotatory inertia, as a function of three nondimensional system parameters; the span to cord length ratio e, the slenderness ratio s, and the rise to cord length ratio f. Experimental measures of frequencies and mode shapes for several laboratory-scale catenary models serve to validate the theoretical results.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.138-139
• /
• 2004

In this paper, we propose a reflective In-Plane Switching twisted nematic mode with negative liquid crystal and weak surface anchoring energy (10$^{-6}$ J/m) in order to enhance reflectance and cellgap margin.

• 한국전자파학회논문지
• /
• 제24권5호
• /
• pp.502-507
• /
• 2013

본 논문에서는 개구면이 큰 기존 원형 이중 모드 혼의 E/H 평면 방사 패턴 대칭성 향상을 위한 변형된 개구면을 갖는 원형 이중 모드 혼을 제안한다. 제안된 안테나는 급전부, 모드 발생부, 위상정합부로 구성되며, 이 중 위상정합부의 원형 개구면은 E/H 평면의 방사 패턴 대칭성 향상을 위해 타원형 혹은 직사각형으로 변이된 형상을 갖는다. 제안된 안테나와 기존 원형 이중 모드 혼의 성능 비교를 위해 15 GHz에서 동작하는 기존 원형 이중모드 혼과 직사각형 개구면을 갖는 원형 이중 모드 혼을 제작하고 분석하였다. 측정 결과, f/d 비가 1인 반사판 안테나의 최대 개구 효율을 위한 급전 혼의 빔 폭인 -11 dB 빔 폭($53^{\circ}$) 내에서 기존 원형 이중 모드 혼의 경우 3.394 dB의 E/H 평면 방사 패턴 차이를 갖는 반면, 제안된 안테나는 오직 0.539 dB 차이를 가진다.