• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.341-347
• /
• 2022

This research is designed to help and offer hold up to complete the requirements of aged and disable in a home. The control approach and the tone approach are used to manage the house appliances. The major organize system implementation in technology of wireless to offer distant contact from a phone Internet Protocol connectivity for access and calculating strategy and appliance remotely. The planned system no need a committed server PC with value of parallel systems and offers a new communication-protocol to observe and control a house environment with more than just the switch functionality. To express the possibility and efficiency of this system, devices like as lights switches, power plugs, and motion-sensors have been included with the planned home control system and supply more security manage on the control with low electrical energy activate method. The rank of switches is corresponding in all this control system whereby all user interfaces indicate the real time existing status. This system planned to manage electrical-appliances and devices in house with reasonably low cost of design, user friendly interface, easily install and provide high security. Research community generally specified that the network "Reconnaissance Attacks" in IPv6 are usually impossible due to they will take huge challenge to carry out address scanning of 264 hosts in an IPv6 subnet."It being deployed of IPv6 shows that it definitely enhances security and undermines the probability". This research of the IPv6 addressing-strategies at present utilizes and planned a new strategy and move toward to "mitigate reconnaissance attacks".

• KIEAE Journal
• /
• 제16권2호
• /
• pp.23-31
• /
• 2016

Purpose: Recently energy consumption is rapidly increasing due to continuous development of social evolution in various field. In this situation, there is a lot of effort to reduce this energy consumption in many ways, especially in building energy. Preceding studies already started to analyze the housing area such as zero energy house and passive house by researching annual building energy consumption, but to apply the results of housing to office building is insufficient since it has different consumption tendency. Method: In this study, eQuest program was used for simulation and the base model is selected among standard office building in ASHRAE 90.1. Variables are divided into passive and active factors for comparison. Result: In passive factors, glazing system showed the highest energy saving rate by 21.3% with triple low-e glass and enhancing wall u-value showed the lowest energy saving rate by 3.6% with 0.15 m2/K. In active factors, VAV system showed 30.9% energy saving rate when compared to CAV system, and heat exchanger showed 10.2% energy saving rate. For regeneration energy part, photovoltaic panel generated 10.4% of base annual energy usage.

• Industrial Engineering and Management Systems
• /
• 제13권2호
• /
• pp.203-209
• /
• 2014

This research designed and implemented a supply chain risk management platform and applied it to a case study of reduced-fat Lanna pork sausage as a new product development project. The proposed framework has three stages: risk identification, risk assessment, and risk mitigation. Seventeen risk agents with 17 risk events were identified based on SWOT analysis and the Porter Five Forces concept through the process of planning, sourcing, making and delivering, partially captured from the supply chain operations reference model in the first stage. In the second stage, an house of risk (HOR) framework was applied to present the impacts of each risk agent. In the third stage, eight risk agents with high impact were selected to design 21 preventive actions. Finally, three preventive actions with the highest effectiveness to difficulty ratio scores-'sales evaluation of familiar products', 'increasing distribution channels and promotions to improve sales', and 'work flow improvement for work safety'-were then recommended for this new product development.

• 품질경영학회지
• /
• 제36권3호
• /
• pp.1-12
• /
• 2008

Obtaining the accurate final importance of each customer attribute (CA) is very important in the house of quality(HOQ), because it is deployed to the quality of the final product or service through the quality function deployment(QFD). The final importance is often calculated by the multiplication of the relative importance rate and the competitive priority rate. Traditionally, the sample mean is used for estimating two rates but the dispersion is ignored. This paper proposes a new approach that incorporates statistical significance to consider the dispersion of rates in determining the final importance of CA. The approach is illustrated with a design of car door for each case of crisp and fuzzy numbers.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.121-128
• /
• 2005

This is about experimental comparison study between convective heating and radiation heating system to use the design criteria for residential house. Experiment was done in EC(environment chamber) under simultaneous outdoor condition for 4 kinds of heating system such as CRHP(Ceiling Radiant Heating Panel), BEHC( Bottom Electric Heating Coil Mat), EFCU( Electric Fan Coil Unit) and CEHU( Convective Electric Heating Unit). Result show that CRHP ,which is radiation heating system, can consume more 23% energy than convective heating system when it is operated by dry bulb temperature but can save 1 ${\sim}$ 10% when operated by glove temperature and 27% when operated by MRT.

• 한국농공학회논문집
• /
• 제57권5호
• /
• pp.51-60
• /
• 2015

In Korea, 69.4 % of duck farms had utilized conventional plastic greenhouses. In this facilities, there are difficulties in controlling indoor environments for raising duck. High rearing density in duct farms also made the environmental control difficult resulting in getting more stressed making their immune system weaker. Therefore, a facility is needed to having structurally enough solidity and high efficiency on the environmental control. So, new design plans of duck house have recently been conducted by National Institute of Animal Science in Korea. As a study in advance to establish standard, computational fluid dynamics (CFD) was used to estimate the aerodynamic problems according to the designs by means of overall and regional ventilation efficiencies quantitatively and qualitatively. Tracer gas decay (TGD) method was used to calculate ventilation rate according to the structural characteristics of duck houses including installation of indoor circulation fan. The results showed that natural ventilation rate was averagely 164 % higher than typically designed ventilation rate, 1 AER ($min^{-1}$). Meanwhile, mechanically ventilated duck houses made 81.2 % of summer ventilation rate requirement. Therefore, it is urgent to develop a new duck house considering more structural safety as well as higher efficiency of environmental control.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.10-20
• /
• 2013

The Yoon Jeung residence is a well-known and prototypical aristocratic house example showing typical and interesting characteristics of the traditional houses in the middle region of Korea. When it comes to understanding the architectonic characteristics of a Korean traditional house, it was not easy to actually capture the compositional and/or constructional knowledge of the building even though it is a wooden building with many wooden members showing their compositional relations. Now with the help of the BIM tool, the Building Information Modeling tool, we could actually be able to compare and analyze each member and their compositional relations. In this paper we examine the unique traditional composition method used in extending the building's structural sections utilizing the bended-joint characteristics of traditional buildings with exemplar case of the Yoon Jeung residence. Thereby we examine those relationships among three major compositional parts namely the plan based spatial compositions, the upper wooden compositions and the roof forms so as to specify the building's typical characteristics with reasonably acceptable causes. The inner and outer block of the residence are handled with their bended-joints with more detailed knowledge of categorization by way of joint relationships among members.

• Architectural research
• /
• 제21권1호
• /
• pp.9-20
• /
• 2019

In the spatial configuration of a unit plan, two rules exist: one that governs the arrangement of spaces, and one that controls the design process of generating a unit plan. This study defines space grammar as an integration of the two rules that give birth to a given spatial configuration and as the process of the generation of unit plans. To understand the distinctive features of Indonesian row houses, this study analyzes the unit plans of row houses in new towns of the metropolitan cities of Indonesia, derives a common space grammar from the unit plans, and interprets the sociocultural background that has produced this space grammar. This study employs Seo's (2007a; 2007b) graph-theoretic methodology to analyze the spatial configurations of unit plans along with a topographical approach to systematically illustrate the design process. The guest space was found as the most unique space of Indonesian houses, which cannot be found in other Southeast Asian houses. Kitchen was clearly seperated from the dining and living spaces, following traditional custom. Dining space was found to serve as a circulation center, connecting the entrance, the lving area and the kitchen. This study locates the basic orders of primary space and the design principles that dictate the unique spatial configurations of Indonesian row houses. This study reveals the basic space grammar that underpins the forms of Indonesian row houses, explaining the sociocultural and geo-climatic factors affecting this space grammar and proposing unique characteristics of Indonesian contemporary houses.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.78-82
• /
• 2001

Most of current Internet auction systems are simple server programs that partly automated the function of the conventional auction house. These system do not provide sufficient independence, distribution and parallelism between the functions of the conventional auction house. In there are automated by server program, but still users need to execute a repetitive task to monitor the dynamic progress of a certain auction, decide proper bid price, and submit the bid. Another problem is that they support only single as English auction and Dutch auction, but they do not support the double auctions are superior to the single auction with respect to speed., efficiency, and the fair distribution of profit. In this paper, we present design and implement of an agent-based continuous double auction system, called CoDABot, in order to mitigate the limitations of current auctions system. CoDABot supports continuous double auction, provides various bidding agent for users to select, and has been implemented into a multi-agent system that realize more independent, distributed, and parallel subsystems.

• 한국항공우주학회지
• /
• 제50권5호
• /
• pp.317-323
• /
• 2022

본 논문에서는 c-스파 단면을 갖는 복합재 로터 블레이드에 대해 co-rotational(CR) 이론 기반 비선형 쉘 요소를 사용하는 In-house code를 통해 고유진동수를 구하고, 이를 이용하여 블레이드의 진동특성을 예측하는 심층신경망 모델을 개발하였다. 심층신경망 모델은 무작위 두께 분포를 갖는 데이터와 스팬 방향으로 두께 감소 경향성을 보이는 데이터를 통해 심층신경망 모델의 정확성을 평가하였다.