• 제목/요약/키워드: In-board

검색결과 7,001건 처리시간 0.038초

가야금(伽倻琴) 향판재(響板材)의 개선(改善)에 관(關)한 연구(硏究) (Studies on the Improvements for GAYAKUM Sounding Boards)

  • 홍병화
    • Journal of the Korean Wood Science and Technology
    • /
    • 제18권4호
    • /
    • pp.65-78
    • /
    • 1990
  • For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.

  • PDF

정신분열병 환자의 인지 기능 재활에 대한 보드게임 요법의 효과 분석 (The Effects of Board-Game Therapy on Cognitive Rehabilitation in Patients with Chronic Schizophrenia)

  • 윤탁;정안순
    • 생물정신의학
    • /
    • 제13권2호
    • /
    • pp.82-94
    • /
    • 2006
  • Objectives : In order to explore effects of board-game therapy for cognitive rehabilitation in patients with schizophrenia, we investigated the change of executive cognitive function over a 2-month period of board-game therapy in patients with schizophrenia. Methods : Two groups of chronic schizophrenic inpatients were participated in this study. One group(n=21) were treated with board-game therapy for 2 months and the other control group(n=19) were not treated. For the evaluation of the executive cognitive function, a Wisconsin Card Sorting Test(WCST) was administered before and after the introduction of the board-game therapy. PANSS score change was also evaluated. Result : At the beginning of this study, there was no significant difference in performance of cognitive function tests, demographical data or clinical severity between both patient groups. After 2 months of treatment with the board-game therapy, the board-game therapy group showed significant improvements of executive cognitive function without any significant change of their schizophrenic symptoms. On the contrary, there was no change in control group. Conclusion : This study showed that a board-game therapy is effective for the enhancement of executive cognitive function in patients with chronic schizophrenia. A board-game therapy could be introduced with ease into psychiatric fields, such as inpatients' or outpatients' clinic wards and day hospital. Our result indicates that the board-game therapy is a promising tool for the enhancement of cognitive function, especially executive cognitive function and helpful for cognitive rehabilitation for schizophrenic patients.

  • PDF

플로어링보드용으로서 배향성스트랜드보드(O.S.B)의 적합성 분석 (Analysis of Suitability of Oriented Strand Board(O.S.B) as a Flooring Board)

  • 신상호;박철우;임남기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 춘계 학술논문 발표대회
    • /
    • pp.213-214
    • /
    • 2019
  • Oriented strand board(O.S.B) is used in many areas, such as interior and interior finishes of wooden houses, but no cases and studies have been used as flooring materials for flooring boards. In this study, we will examine the quality and performance of the aromatic strands board, which we believe can be substituted for the plywood, and analyze its suitability as a floorboard.

  • PDF

제어보드와 파워보드에 관한 발열성능 평가 (Evaluation of Control Board and Power Board Thermal Performance)

  • 장성철;권민수
    • 한국산업융합학회 논문집
    • /
    • 제20권2호
    • /
    • pp.187-194
    • /
    • 2017
  • This study examined the validity and reliability of the thermal safety design, in order to maintain the heat generated from integrated circuit (IC) chips in the converter, condenser, resistor, and transistor (which are considered as heat sources for thermoelectric devices with a printed circuit board) below target levels during the process of developing a control board and a main power board. The study analyzed the heat generation and dissipation characteristics of the entire printed circuit board (PCB) model to examine its thermal safety.

그린팀버월 패널의 열전달 특성 (Heat transfer of green timber wall panels)

  • 김윤희;장상식;신일중
    • 농업과학연구
    • /
    • 제38권1호
    • /
    • pp.115-120
    • /
    • 2011
  • 20% of total energy use to sustain temperature of building inside. In this reasons, researchers effort to improve the thermal insulation capacity with new wall system. Using appropriate materials and consisting new wall system should considered in energy saving design. OSB(Oriented strand board), Larch lining board used to consist wall system. $2{\sim}6$ Larch lining board has tongue & groove shape for preventing moisture. Comparing with gypsum board and green timber lining board as interior sheathing material, temperature difference of Green timber wall system was bigger than temperature difference of gypsum board wall system. This aspects indicate that Green timber wall system was revealed higher thermal insulation property than gypsum board wall system. Gypsum board portion transfer heat easily because temperature difference gradient of gypsum board wall system was smaller than OSB wall system. Total temperature variation shape of G-4-S and G-6-S show similar model but, temperature variation shape in green timber wall portion assume a new aspect. The purpose of this study was that possibility of thermal insulation variation and new composition of wall system identify to improve thermal insulation performance. In the temperature case, this study shows possibility of improving thermal insulation performance. Humidity, sunshine and wind etc. should considered to determine building adiabatic properties.

규격화된 분전반 제작을 위한 표준작업절차(SOP)의 공정 개발 (Process Development of a Standard Operating Procedure (SOP) for the Manufacturing of Standardized Distribution Boards)

  • 고완수;이병설;최충석
    • 한국안전학회지
    • /
    • 제33권5호
    • /
    • pp.21-27
    • /
    • 2018
  • The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

Board Structure and Likelihood of Financial Distress: An Emerging Asian Market Perspective

  • UD-DIN, Shahab;KHAN, Muhammad Yar;JAVEED, Anam;PHAM, Ha
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권11호
    • /
    • pp.241-250
    • /
    • 2020
  • This study examines the relationship between the attributes of board structure and the likelihood of financial distress for the non-financial sector of an emerging market characterized by concentrated ownership and family-controlled business. The present study utilized panel logistic regression to estimate the relationship between board structure attributes and the likelihood of financial distress. We used Altman Z-Score as a proxy for firm financial distress, as this tool measures the financial distress inversely. The study finds a significant relationship between board size and the likelihood of financial distress. The results show that a one-unit increase in board size would decrease the probability of financial distress by 3.4%. Further, we observe that a greater level of board independence is associated with a lower likelihood of financial distress. A one-unit increase in board independence would decrease the probability of financial distress by 20.4%. We also find a significant positive impact of leverage on the likelihood of financial distress. The present study contributes to the body of literature on board structure attributes and likelihood of financial distress in emerging markets, like Pakistan. Furthermore, the findings would be beneficial for corporate policymakers and investors in formulating corporate financial strategy and predicting business failure.

The Board Size and Board Composition Impact on Financial Performance: An Evidence from the Pakistani and Chinese's Listed Banking Sector

  • MAJEED, Muhammad Kashif;JUN, Ji Cheng;ZIA-UR-REHMAN, Muhammad;MOHSIN, Muhammad;RAFIQ, Muhammad Zeeshan
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권4호
    • /
    • pp.81-95
    • /
    • 2020
  • The main objective of this research is to investigate the impact of board size and board composition on financial performance of banks. The sample of this study consists on two countries listed bank sector Pakistan and China. The annul data is used from 2009-2018 to find the objective of this study. The Panel regression model is used to check the relationship between dependent and independent variables. Return on Asset and Return on Equity is used as performance checker dependent variables. The results of this study confirm board size coefficient value positive for ROA and negative for ROE but shows insignificant behavior for Pakistani banking sector while in Chinese banking sector the coefficient value of board size positively for ROA and ROE at 10% level. The board composition coefficient shows the negatively significant with ROA but insignificantly related to ROE for Pakistani banking sector. However, in Chinese banking sector the coefficient value of board composition is insignificant for both ROA and ROE. This study is helpful for banks, management of banks, policy makers, researcher as well as Government.

Comparison of Tilt Variation in the Otter Board and Codend of Bottom Trawl Gear during Fishing Operations

  • Kim, Yong-Hae
    • Fisheries and Aquatic Sciences
    • /
    • 제17권1호
    • /
    • pp.145-153
    • /
    • 2014
  • The motion of the otter board on a trawl can affect the motion of trawl nets, and the motion of the codend can affect fish selectivity. Preliminary measurements of the tilt of bottom trawl gear were carried out to compare the tilts of the otter board and codend. The tilt of the otter board was measured by Vector and tilt at 1.5 m anterior to the end of the codend, and the middle upper panel was measured with a micro-DST-tilt logger. Tilt data such as yaw, pitch, and roll were analyzed by the fast Fourier transformation method and global wavelet and event analyses for the period or amplitude. The mean period ${\pm}$ standard deviation of the tilt in the otter board, $(5-6){\pm}2s$, was similar to the period of the codend, $(4-6){\pm}(2-3)s$, whereas the amplitude of the codend was greater than that of the otter board. The yaw and pitch periods were not significantly different between the otter board and codend, but roll was different. Furthermore, the tilt period frequencies of the otter board and codend were not significantly different. Accordingly, the tilt motion of the codend was mostly related to the tilt of the otter board.