• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.153-163
• /
• 1988

This experiment was carried out to obtain the thermophilic fungus producing amylase and to investigate properties of the amylase. The selected strain, L-11 was obtained from soil in the vicinity of a hot spring and identified as Mocor sp.. And then the conditions for enzyme production in wheat bran cultures and properties of the crude enzyme were investigated. Furthermore, the enzyme was purified and the characteristics of purified enzyme were studied. The results obtained were as follows: 1. On the wheat bran medium added 80-100% water, amylase was effectively produced by the selected strain, L-11 for 48 hrs incubation at $50^{\circ}C$. 2. When the crude enzyme solution of the strain L-11 was passed through DEAE-Sephadex A-50 column chromatography, two peaks having amylase activity were obtained, and one peak was that of the main enzyme (enzyme of B peak). 3. The purified enzyme (enzyme of B peak) was recognized as single protein band on polyacrylamide disc gel electrophoresis. 4. In the hydrolysis reaction of soluble starch by the enzyme of main amylase, oligosaccharides produced at early stage were maltose and maltotriose mainly and procedure of the reaction maltose amount of maltose and glucose was increased. 5. The strain L-11 was recognized as a special strain producing ${\alpha}-amylase$ mainly and scarcely glucoamylase. 6. The optimum pH, optimum temperature, pH stability, and temperature stability of ${\alpha}-amylase$ were pH 4.0, $60-65^{\circ}C$, pH 4.0-9.0, and below$70^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.693-699
• /
• 2013

A simple, sensitive, and specific method for quantifying the nicotine content of synthetic favoring substances (SFS) was developed using high performance liquid chromatography (HPLC) with a photo-diode array detector (PDA). Nicotine was extracted from SFS samples by using an acid-base liquid-liquid extraction method with dichloromethane and distilled water. The nicotine content was quantified by HPLC/PDA (261.9 nm) with a $C_{18}$ column under a gradient of 10% acetonitrile with 20 mM ammonium formate (ammonia solution adjusted to pH 8.7) to 100% acetonitrile. The calibration curve, analyzed from concentration standards between 0.1 to 2 mg/L, presented linearity with a correlation coefficient ($r^2$)>0.9999. The limit of quantitation (LOQ) of nicotine in SFS was 0.4 mg/kg, and the average recoveries ranged from 76.4% to 96.3%. The repeatability of measurements, expressed as the coefficient of variation (CV%), ranged from 1.74 to 5.12%. This newly developed method for nicotine quantification in SFS can be considered an analytical method with an acceptable level of sensitivity and repeatability.

• Korean Journal of Poultry Science
• /
• v.41 no.4
• /
• pp.227-233
• /
• 2014

This study investigated the effects of dietary supplementation with the effective microorganism (EM) on the growth performance, blood parameter, small intestinal microflora, and noxious gas emission of broilers. A total 720 1-d old ROSS 308 was randomly assigned to 6 dietary treatment groups: control, virginiamycin (6 mg/kg), 0.1% PB 0.1% EM, 0.5% EM, and 1.0% EM. Each treatment was fed to 4 replicates of 30 birds per diet for d 35. Two-phase feeding program with a starter diet from 0 to 3 wk, and a finisher diet from 4 to 5 wk was used in the experiment. Within each phase, a diet was formulated to meet or exceed NRC requirements of broilers for macro- and micronutrients. The diet and water were available ad libitum. Result indicated that during overall periods of the experiment, final weight, body weight gain, and feed intake were not different among dietary treatments. Feed conversion ratio was less (P<0.05) for EM treatments than control, antibiotics, and PB. Total cholesterol (TC), triglyceride (TRG), glucose (GLU), total protein (TP), calcium (CA), aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were not different among dietary treatments. White blood cell (WBC), hemoglobin (Hb), heterophils (HE), lymphocyte (LY), monocytes (MO), and eosinophils (EO) were not different among dietary treatments. HE:LY was less (P<0.05) for EM0.5 treatments than control, antibiotics, and PB. Lactobacillus was greater (P<0.05) for EM treatments than control and antibiotics. E. coli and Salmonella were not different among dietary treatments. $NH_3$ and $CO_2$ wereless (P<0.05) for EM treatments than control. These results indicated that EM treatments were effective feed conversion ratio, noxious gas emission and micro flora population on the cecum in broilers.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.1-7
• /
• 2004

Roads, like bikeways, parkways and walks, are to be just capable of supporting light traffic and traveling public, but they are required to be human friendly and environmental-oriented. Lately soil-solidifier mixture, a kind of soil-cement, has developed and has been applied to the recycling and environment-oriented pavement as the surfacing material. Soil-solidifier pavement structure has been designed by only experience. To design this pavement mechanically, it is necessary to find out basic engineering properties of soil-solidifier mixture. This study focuses on finding out mechanical characteristics of the mixture according to mixture proportions and aging. Test molds with various mixture proportions are made, and then unconfined strength tests are performed for test molds with aging of the mixture. As the result of this study, it is found that the strength of the mixture increases with amount of cement and that maximum strength is achieved at 6%$\sim$8% of the ratio of solidifier and water. The strength increase rapidly until 14 days, after then slowly. After 28 days the strength of the mixture approaches to the constant value. The heat of hydration during curing of the mixture is measured no significantly. It also shows that temperature characteristics of the mixture is similar to that of soil. Since this mixture is mixed with soil and is able to improve engineering problems in pavement due to temperature, this mixture is expected to use effectively in the environment-oriented pavement for light traffic.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.111-126
• /
• 1992

Silica sorption isotherm belonged to the C-type with weak L-type characteristics according to the classification system of adsorption isotherm. Silica sorption isothem fitted well to the Freundlich and Tempkin equation but not to the Langmuir equation. The color interference probably due to $Fe^{2+}$ during spectrometric silca determination by Molybdenum-blue method affected the sorption isotherm in reduced soils or low pH. Four parameters such as the intercept of Freundlich equation, the slope of Tempkin equation, the "Silica reactivity", and the "C-type slope", where the last two parameters were termed in the current study, were examined to assess treatment effects on silica sorption. Among them the "C-type slope" was found out to be the best parameter. The C-type isotherms showed the same high correlation coefficient as Freundlich and Tempkin equation when regressed to the sorption isothem. Plotting the C-type slope on a logarithmic scale vs. the pH showed high linearity. Using the "C-type slope" as a perameter, the pH and soil type affected the silica sorption while the effect of redox condtion was not significant. All Fe and Al extracted by the various reagents, and OM were highly correlated to silica sorption. Among them $Fe_d$ was identified as the highest influencing soil property. Since there is no equivalent reliable method to discriminate the forms of the soil Al-oxides their likely importance remains unclear.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.430-435
• /
• 2005

Current study was conducted to investigate the effect of organic selenium supplementation originated from mushroom culture medium on meat quality of Hanwoo sleets. The result showed that organic selenium supplementation of 0.9 ppm (DM based ratio) for 2 (T1), 4 (T2) and 6 (T3) months had no effect on moisture content in longissimus muscle, with 63 to $66\%$ compared to non-supplemented control group Similarly, intramuscular fat content ranged from 11.7 to $16.4\%$ did not differ between the treatment groups (p>0.05). T3 group showed the highest protein content with $20.8\%$ while T2 group had the lowest content with $19.2\%$ The data indicated that organic selenium supplementation to the experimental concentration had indictable effect on proximate composition The treatments similarly had no influence on physical and biological characteristics of longissimus muscle, where cooking loss and shear force ranged from 20 to $21\%$ and from 3.6 to 4.4kg, respectively. On the other hand, muscle pH at 24 h postmortem showed 5.52, 5.57, 5.50, 5.50 for control, T1, T2 and T3, respectively, indicating that the longer feeding period resulted in the lower ultimate un A similar trend was observed from water-holding capacity (63.8, 64.4 and $64.2\%$ for T1, T2 and T3, respectively) which was significantly higher than con01 group of $59.5\%$ For sensory evaluation, juiciness did not differ between the treatment groups, but n and n (5.30 and 5.28, respectively) showed significantly tender mat Particularly, T2 group received significantly higher flavor score among the treatment groups including controls. The data indicated that organic selenium supplementation to the experimental concentration had no effect on beef quality, but the treatment effect on anti-oxidation function is remained for further studies.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.469-476
• /
• 2011

This study was conducted to evaluate the functional effects of adding oyster shell powder on the quality properties and storage stability of emulsion-type pork sausages to substitute phosphates as a curing agent. Seven treatments were prepared: T1 (Control), T2 (0.3% STPP), T3 (1.5% NaCl), T4 (1.5% NaCl + 0.5% whey protein), T5 (1.5% NaCl + 0.5% whey protein + 0.15% oyster shell powder), T6 (1.5% NaCl + 0.5% whey protein + 0.3% oyster shell powder), and T7 (1.5% NaCl + 0.5% whey protein + 0.5% oyster shell powder). Significant differences were observed for ash in the proximal analysis. Adding 0.5% oyster shell powder significantly increased pH values when compared to the other treatments. Pork sausages with 0.3% oyster shell powder had significantly improved water holding capacity and cooking loss. Adding oyster shell powder (0.15, 0.3, and 0.5%) resulted in significantly higher hardness, cohesiveness, springiness, and chewiness values than those in the other treatments. No significant differences were observed among treatments during 14 d of cold storage at $4^{\circ}C$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.520-527
• /
• 2008

Purpose: This study was conducted to evaluate the shear bond strength of composite resin to dentin when etched with laser instead of phosphoric acid. Material and methods: Recently extracted forty molars, completely free of dental caries, were embedded into acrylic resin. After exposing dentin with diamond saw, teeth surface were polished with a series of SiC paper. The teeth were divided into four groups composed of 10 specimens each; 1) no surface treated group as a control 2) acid-etched with 35%-phosphoric acid 3) Er:YAG laser treated 4) Er,Cr:YSGG laser treated. A dentin bonding agent (Adapter Single Bond2, 3M/ESPE) was applied to the specimens and then transparent plastic tubes (3 mm of height and diameter) were placed on each dentin. The composite resin was inserted into the tubes and cured. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours and the shear bond strength was measured using a universal testing machine (Z020, Zwick, Germany). The data of tensile bond strength were statistically analyzed by one-way ANOVA and Duncan's test at ${\alpha}$= 0.05. Results: The bond strengths of Er:YAG laser-treated group was $3.98{\pm}0.88$ MPa and Er,Cr:YSGG laser-treated group showed $3.70{\pm}1.55$ MPa. There were no significant differences between two laser groups. The control group showed the lowest bond strength, $1.52{\pm}0.42$ MPa and the highest shear bond strength was presented in acid-etched group, $7.10{\pm}1.86$ MPa (P < .05). Conclusion: Laser-etched group exhibited significantly higer bond strength than that of control group, while still weaker than that of the phosphoric acid-etched group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.504-511
• /
• 2001

Preventive resin restoration, extended concept of occlusal pit and fissure sealing, is procedure composed of as follows. Cavity preparation is limited to areas of initial caries The cavity is then restored with composite resin, while other sound pits and fissures are sealed with pit and fissure sealant. If pit and assure sealant with which microrestoration is possible is used, it may be of great benefit to both patient and operator in case of difficult-to-control children s treatment. However study on preventive resin restoration using this kind of materials have been scarce. The purpose of this study was to compare the microleakage of four different modes of preventive resin restoration. Restoration using only composite resin was compared together Fifty-five bicuspids were prepared with small class I cavity preparation on the occlusal surface, divided into the following groups and restored accordingly. Group 1 : Cavity was restored with Z-100 composite resin Group 2 : Cavity was restored with Z-100 composite resin. Pits and fissures were then sealed with Teethmate F-1 Group 3 : Cavity was restored with Z-100 composite resin Pits and fissures were then sealed with Ultraseal XT-plus Group 4 : Cavity and pits and fissures were restored with Ultraseal XT-plus altogrether Group 5 : Cavity was restored with Ultraseal XT-plus. Pits and fissures were then sealed with the same material. After restoration, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue solution for 24 hours, then rinsed with tap water. The teeth were then embedded in resin and cut buccolingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage. The results were as follows : 1. Group 4 showed the greatest microleakage, while group 3, showed the least. The mean microleakage decreased in the following order:4>1>5>2>3. 2. There was no stastically significant difference between group 1 and group 5(p>0.05). However, group 1 showed significantly greater microleakage compared to group 2 and 3(p<0.05) Group 1 showed significantly less microleakage compared to group 4(p<0.05). 3. Group 2 showed no statistically significant difference compared to group 3(p>0.05). However group 2 showed significantly less microleakage compared to group 4 and 5(p<0.05) 4. Group 3 showed significantly less microleakage compared to group 4 and 5(p<0.05). 5. Group 5 showed significantly less microleakage than group 4(p<0.05).

• Journal of Aquaculture
• /
• v.7 no.1
• /
• pp.63-76
• /
• 1994

The effects of different dietary lipids on growth, body chemical composition, and nutrient partition of the Korean rockfish (43 g of initial mean weight) were studied. Fish were fed three experimental diets containing 1) $4.5\%$ squid liver oil, 2) $1\%$ squid liver oil and $3.5\%$ beef tallow, and 3) $1\%$ squid liver oil and $3.5\%$ soybean oil. Growth and feed efficiency were detarmined during a 19-week feeding period at water temperature of $15.5^{\circ}C$, and at the end of which body chemical compositions were analyzed. Remained fish were fasted for 45 days, and four fish were taken at 6, 12 and 24 hours, and 3, 15 and 45 days after the fasting to determine tissue compositions and hematological changes. Growth, feed efficiency, protein and lipid retention efficiency, hepatosomatic index(HSI), viscerosomatic index (VSI), and chemical composition of whole body and dorsal muscle were not affected by the different dietary lipids. Liver moisture content of fish fed squid liver oil diet was higher than that of fish fed beef tallow or soybean oil diet. Liver lipid content of fish fed beef tallow diet was higher than that of fish fed the other diets. Fatty acid composition of dorsal muscle and liver were affected by the different dietary lipids ; high levels of 20 : 5n-3 and 22 : 6n-3 from fish fed the diet containing squid liver oil, 18 : 1 from fish fed the diet containing beef tallow, and high 18 : 2n-6 and 18 : 3n-3 from fish fed the diet containing soybean oil were observed. Both HSI and VSI of fish fed three diets decreased with time after the begining of starvation. Liver glycogen did not change during the first 15 days of starvation and decreased thereafter, and that was not affected by the different dietary lipids. Lipid and protein contents in the dorsal muscle of fish decreased up to 15 days of starvation and remained unchanged thereafter, these were not different from each other. Glucose, free fatty acid, triglyceride and phospholipid concentrations in Fish serum were varied for the first 15 days of starvation, after that the concentrations of fish serum remained relatively stable in all the treatment groups with prolonged starvation. The results indicate that Korean rockfish can utilize fish oil, animal fat or vegetable oil equally as energy source when n-3HUF A is adquate.