• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.643-649
• /
• 2011

The objective of this study was to determine the effect of feeding direct-fed microbials (DFM) on the growth performance and prophylaxis of calf diarrhea during the pre-weaning period as an alternative to antibiotics. A multi-species DFM was formulated including three lactic acid bacteria (Lactobacillus salivarius Ls29, Pediococcus acidilactia Pa175, and L. plantarum Lp177), three Bacillus strains (B. subtilis T4, B. polymyxa T1 and SM2), one yeast, Saccharomyces boulardii, and a nonpathogenic E. coli Nissle 1917. Lactic acid bacteria and Bacillus strains were selected based on the antibacterial activity against various animal pathogens, especially pathogenic E. coli using agar diffusion methods in vitro. Test and control groups were fed milk replacer and calf starter supplemented with DFM ($10^9$ cfu each of eight species/d/head, n = 29) or with antibiotics (0.1% neomycin sulfate in milk replacer and Colistin 0.08% and Oxyneo 110/110 0.1% in calf starter, n = 15), respectively. Overall fecal score and the incidence rate of diarrhea were reduced in the DFM group compared to the antibiotics one. About 40% of calves in antibiotic group suffered from diarrhea while in DFM group only 14% showed diarrhea. There was no difference in the average daily gain and feed efficiency of two groups. The hematological levels of calves were all within the normal range with no significant difference. In conclusion, the feeding of multispecies DFM during the pre-weaning period could reduce calf diarrhea and there was no difference in the growth performance between the groups, thus showing the potential as an alternative to antibiotics.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.729-735
• /
• 2000

Moisture loss of fresh fruits and vegetables is a main cause of deterioration. It resulted not only in the direct quantitative loss, but also in change in appearance, texture and nutrition. To reduce the loss of moisture content during the distribution in the market, fresh products are packaged using plastic films. But, most of the fresh products are packaged manually in Korea. In order to minimize the labor requirement, the packaging machine for fruits and vegetables was developed and tested. Prototype was composed of film feeding unit, bag former, products feeding conveyor, film feeding roller, center sealer, end sealer and discharge conveyor. Green peppers, carrots and perilla leaves were tested with prototype. Prototype could pack 1780, 1390, 1780 bags per hour at the feeding speed of 0.08m/s respectively and 2250, 1810, 2640bags per hour at the feeding speed of 0.10m/s respectively. And packaging speed of green peppers and carrots was improved by 3.7 and 3.4 times compared with manual packaging. The packaging condition with the prototype was good and the products had almost no damages.

• Ocean Science Journal
• /
• v.42 no.3
• /
• pp.193-197
• /
• 2007

The food selectivity of tethered females of the copepod Calanus helgolandicus was examined by using the colorimetric approach. First, feeding behavior of the copepod did not show any differences between the red-color stained with neutral red and non-stained diets using the diatom Coscinodiscus curvatulus. Then, the copepods were fed a mixtures of two diets, the diatom C. curvatulus, stained with neutral red, and the dinoflagellate Gymnodinium sanguineum for $14\sim60$ minutes of feeding duration. The foregut colors of females were examined using a stereo-microscope and a video monitor. The foreguts of animals fed with a high density of diatoms in mixed diets showed a dark red color, whereas those fed with a high density of dinoflagellate in mixed diets were a dark yellow. The results suggest that this species of copepod may not selectively feed either one of the diets used for this study. Their feeding activity may be more likely related to the density of available prey in their environment. Therefore, this quick and easy colorimetric approach could provide very useful information, like the pre-screening procedure before designing and conducting the time-consuming and complex feeding experiments to understand the feeding ecology of copepods.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.139-151
• /
• 2008

The purpose of this study was to determine the empirical cause-effect relationships among business ethical values and person-organization fit, job satisfaction, turnover intent, and organizational performance within family restaurants and feeding facilities. Self-administered questionnaires were completed by 459 restaurant employees. The SPSS and Amos programs were then applied to the data to perform frequency, factor, reliability, correlation and SEM analyses. The primary results are as follows. First, business ethical values had a significant positive effect on person-organization fit. Second, person-organization fit had a significant positive effect on job satisfaction, and a significant negative effect on turnover intent. Third, job satisfaction had a significant positive effect, and turnover intent had a significant negative effect, on organizational performance. Finally, upon verifying the possible direct and indirect effects of business ethical values within family restaurants and feeding facilities, it was determined that the ethical values had significant direct and indirect effects on person-organization fit, job satisfaction, turnover intent, and organizational performance. These findings have various implications. For example, an improved in-house ethical working environment leads to greaterperson-organization fit, and having employees that feel there is better in-house ethical reliability leads to greater consistency between personal and organizational values, resulting in higher job satisfaction and ultimately organizational performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.157-163
• /
• 1997

In the case of direct connecting the nut of ballscrew to guide table, machining error and misalignment of ballscrew largely affect to the motional accuracy of guideway. For decreasing these influences, two type of floating couplings: leaf spring type and hybrid type which releases the table from nut of ballscrew except feed and rotational direction is proposed in this study. In order to verify practical availability of the proposed floating couplings, motional accuracy, dynamic characteristics and micro step response of hydrostatic guideway, mounted with each type of couplings are tested. The conventional fixed type coupling is also tested as the reference in characteristics. From the results of experiments, it is proved that the hybrid type coupling is superior to other couplings and is available to high precision feeding system with ballscrew.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.951-959
• /
• 2016

The aim of this paper is to investigate the improvement of surface characteristics of Stellite21 deposited layer by powder feeding type of direct energy deposition (DED) process using a plasma electron beam. Re-melting experiments of the deposited specimen is performed using a three-dimensional finishing system with a plasma electron beam. The acceleration voltage and the travel speed of the electron beam are chosen as process parameters. The effects of the process parameters on the surface roughness and the hardness of the re-melted region are examined. The formation of the re-melted region is observed using an optical microscope. Results of these experiments revealed that the re-melting process using a plasma electron beam can greatly improve the surface qualities of the Stellite21 deposited layer by the DED process.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.4
• /
• pp.645-654
• /
• 2002

Purposes : This study was conducted to examine nursing effects after using a new method of nasogastric tube feeding with recycled PETE bottle making use of gravity, and to compare with those of bolus method using syringe and pressure. Methods : The data collected from patients with nasogastric tube feeding more than a week at an internal medicine unit of C university hospital located in G-city from January 1st, 1998 through June 30th, 2000. For this nonequivalent control group posttest non-synchronized design, 28 patients were assigned to an experimental group and 35 patients to a control group. The homogeneity of two groups and the dependent variables were tested with use of $x^2-test$ and t-test. Results : The duration of hemostatic use was significantly shorter in the experimental group than control group(t=2.63, p=0.02). Also, the patients with PETE bottle feeding had a lower cost of material(t=3.51, p=0.01) and a lower rate of the time of direct nursing care(t=2.44, p=0.04) than those of control group. But, there was no significant difference between two groups in the length of hospital stay. Conclusion : This results indicates that nasogastric tube feeding with PETE bottle is superior to nasogastric tube feeding with syringe. This findings gave us an evidence to enhance nursing effectiveness in clinical setting.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.381-390
• /
• 2002

Direct seeding of rice-seed pellets is expected to be an alternative for solving problems in current direct seeding cultivation of rice. but mass production of rice-seed pellets is prerequisite for practical application. Design. construction and performance evaluation of an experimental rice seed pelleting machine were carried out for mass production of rice-seed pellets. The pelleting machine intended to make a ball type rice-seed pellet, which have 3∼5 rice seeds and diameter of which is 12 mm. Pellet materials ; rice seeds, soil, and binder were mixed and kneaded by the mixer. The designed rice seed pelleting machine fed pellet materials by screw conveyor to forming rolls and made rice-seed pellets. Capacity, ratio of perfect rice-seed pellets, seed and pellet material loss were investigated as mixing ratio of soil to rice seed and feeding rate of pellet materials. The pelleting machine showed up to 37,000 pellets/h of pelleting rate, 61∼71% of weight ratio of perfect rice-seed pellets to pellet materials supplied, 17∼48% of seed loss ratio. Average weight and average diameter of the pellets were 1.66 g and 12.0 mm. respectively. More than 3 rice seeds were included in most pellets at 6 : 1 of mixing ratio of soil to rice seed. And compression strength of the pellets was in the range of 88-130 N. To improve performance of the pelleting machine, improvements of the forming rolls, feeding mechanism, and discharging mechanism for reducing loss of pellet materials and seeds damage are needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.859-865
• /
• 2002

The aim of this research was to clarify the direct effects of a hot environment on ruminal motility in sheep fed twice a day. In the first experiment, in order to equalize variable factors excluding the ambient temperature between the thermoneutral environment ($23^{\circ}C$, relative humidity 80%) and the hot environment ($32^{\circ}C$, relative humidity 80%), sheep were fed equal amounts of the same quality feed twice a day. The sheep were allowed free access to water for the duration of the two one-hour feeding periods (10:00 am-11:00 am, 5:00 pm-6:00 pm). On the fourth day after exposure to the hot environment, the frequency and strength of ruminal contractions were continuously recorded between 9:30 am and 11:00 pm. Prior to the exposure to a hot environment the frequency and strength of ruminal contractions were recorded in a thermoneutral environment during the period 9:30 am-11:00 pm. In the second experiment, in order to maintain the stomach content of the sheep at equal levels in both environments, the sheep were fed equal amounts of the same quality feed twice a day. Following the completion of the two one-hour feeding periods, a fixed amount of warm water was infused into the rumen. Rumen motility was then recorded during the same period as for the first experiment (9:30 am-11:00 pm). In the first experiment, when the frequency of ruminal contractions prior to (24, 24 frequency/15 min), during (48, 47 frequency/min) and after (22, 19 frequency/min) both the morning and afternoon feeding in a hot environment was compared with the values from the thermoneutral environment (20, 22; 50, 50; 21, 20 frequency/min), there was found to be no difference. However, the strength of ruminal contractions after morning and afternoon feeding (3.7, 3.1 mm Hg) in the hot environment decreased significantly in comparison with the thermoneutral environment (4.3, 3.8 mm Hg). In the second experiment, the frequency of ruminal contractions in the hot environment was not significantly different from that in the thermoneutral environment. The strength of ruminal contractions after ruminal infusion of warm water in the hot environment (morning: 4.6, afternoon: 4.5 mm Hg) was significantly lower than that in the thermoneutral environment (morning: 5.6, afternoon: 5.0 mm Hg). The results suggest that a hot environment acts directly on the strength of ruminal contractions in sheep fed twice a day rather than on the frequency.

• Therapeutic Science for Rehabilitation
• /
• v.13 no.2
• /
• pp.9-25
• /
• 2024

Objective : Children with autism spectrum disorder (ASD) commonly suffer from feeding disorders. Major feeding problems include mealtime behavior problems, picky eating, and a lack of food variety can lead to nutritional problems, developmental and social limitations, and stress for the caregivers. A review of the latest literature was conducted to gain an in-depth understanding of assessment tools for feeding disorders in children with ASD. Method : This study analyzed assessments to identify feeding problems in ASD based on previous studies searched through keywords such as ASD, ASD feeding problem, and ASD feeding evaluation. Results : The ASD feeding disorder assessment was divided into direct and indirect assessments. Indirect assessment, in which caregivers measure a child's situation using questionnaires, is mainly used. The assessment of feeding disorders in children with ASD was divided into 1) mealtime behavior, 2) sensory processing, 3) food consumption, and 4) others. Conclusion : As the main feeding disorder characteristics of children with ASD are very diverse, a comprehensive evaluation is necessary but is still limited. Swallowing rehabilitation experts, such as occupational therapists, should apply comprehensive assessment tools based on a basic understanding of the feeding problems, behaviors, and sensations in ASD.