• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.326-327
• /
• 2005

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.1015-1039
• /
• 2014

The widening project on Freeway No.1 in Taiwan has a total length of roughly 14 kilometers, and includes three special bridges, namely a 216 m long-span bridge crossing the original freeway, an F-bent double decked bridge in a co-constructed section, and a steel and prestressed concrete composite bridge. This study employed in-situ monitoring in conjunction with numerical modeling to establish a real-time monitoring system for the three bridges. In order to determine the initial static and dynamic behavior of the real bridges, forced vibration experiments, in-situ static load experiments, and dynamic load experiments were first carried out on the newly-constructed bridges before they went into use. Structural models of the bridges were then established using the finite element method, and in-situ vehicle load weight, arrangement, and speed were taken into consideration when performing comparisons employing data obtained from experimental measurements. The results showed consistency between the analytical simulations and experimental data. After determining a bridge's initial state, the proposed in-situ monitoring system, which is employed in conjunction with the established finite element model, can be utilized to assess the safety of a bridge's members, providing useful reference information to bridge management agencies.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.102-108
• /
• 2011

The study of wave propagation and scattering in biological media has become increasingly important in recent years. The propagation of light within tissues is an important problem that confronts the dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. In the clinical application of photodynamic therapy(PDT) and in photobiology, the photon deposition within a tissue determines the spatial distribution of photochemical reactions. Scattered light is measured as a function of the distance (r) between the axis of the incident beam and the detection spot. Consequently, knowledge of the photosensitizer(Chlorophyll-a) function that characterizes a phantom is measured. To obtain the results of scattering coefficients(${\mu}s$) of a turbid material from diffusion described by experimental approach. It was measured the energy fluency of photon radiation at the position of penetration depth. From fluorescence experimental method obtained the analytical expression for the scattered light as the values of $(I/I_o)_{wavelength}$ vs the distance between the center of the incident beam and optical fiber in terms of the condition of "in situ spectroscopy(optically thick)" and real time by fluorometric measurements. The result was compromised with transport of intensities though a random distribution of scatters.

• Corrosion Science and Technology
• /
• 제18권4호
• /
• pp.121-128
• /
• 2019

Electrochemical Impedance Spectroscopy (EIS) was used to predict corrosion behaviour of metallic Cultural Heritage assets in two monitoring campaigns: 1) an iron bar chain exposed indoor from over 500 years in the Notre Dame Cathedral in Amiens (France); and 2) a large weathering steel sculpture exposed outdoor from tens of years in Ferrara (Italy). The EIS portable instrument employed was battery operated. In situ EIS measurements on the iron chain could be used to investigate the phenomena involved in the electrochemical interfaces among various corrosion products and assess and predict their corrosion behaviour in different areas of the Cathedral. Meanwhile, the sculpture of weathering steel, like most outdoor artefacts, showed rust layers of different chemical composition and colour depending on the orientation of metal plates. The EIS monitoring campaign was carried out on different areas of the artefact surface, allowing assessment of their protective effectiveness. Results of EIS measurements evidenced how employing a simple test that could be performed in situ without damaging the artefacts surface is possible to quickly gain knowledge of the conservation state of an artefact and highlight potential danger conditions.

• 분석과학
• /
• 제5권3호
• /
• pp.303-308
• /
• 1992

Ti과 Si의 초기 반응이 Titanium Silicide의 표면 거칠기 (Surface roughness)를 고찰하기 위해 연구하였다. 형성기구는 In-situ AES와 LEED의 측정장비로 연구하였다. Ti의 하나나 두 원자층이 초고진공에서 원자적으로 깨끗한 Si 기판 위에 증착되었다. Reconstruction이 된 $7{\times}7$ Si(111) 표면이 초 고진공하에서 얻어졌으며 박막의 증착은 Quartz Crystal Oscillator로 측정되었다. In-situ 측정 결과 Ti과 Si의 초기 반응이 실온에서 일어났으며 Disorder막을 형성하였다. 낮은 온도($200^{\circ}C{\sim}300^{\circ}C$)에서 Ti과 Si의 Intermixing이 고찰되었고 $400^{\circ}C$ 근처에서 $1{\times}1$ Si(111) LEED 패턴이 관찰되었다. 이것은 Disorder막이 Order막으로 변화가 생긴 것을 나타낸다. 더 높은 온도에서 $7{\times}7$ Si(111) LEED 패턴이 재관찰되었는데 이것은 3차원적인 $TiSi_2$의 형성을 증명하는 것이다.

• 전기화학회지
• /
• 제5권3호
• /
• pp.143-152
• /
• 2002

Self-assembled monolayer(SAM)로 변형된 금 전극 위로 폴리피롤의 전기화학적 석출 과정을 수용액 상태에서 in-situ EQCM (Electrochemical Quartz Crystal Microbalance)과 ex-situ AFM (Atomic Force Microscopy)을 이용하여 조사하였다. 금 전극에서 cyclic voltammetry로 살펴본 폴리머의 석출은 산화 제한 전위 (anodic limiting potential) 값에 매우 의존적이었으며 주사 횟수에는 의존하지 않았다. 제한 산화 전위가 0.8V (vs Ag | ArCl) 이상일 때 폴리머의 석출은 크게 증가하였다. 그리고 주사 횟수가 증가하면서 질량의 비이상적 변화가 관찰되었는데 이것은 폴리피롤 필름의 rearrangement가 원인이라고 생각된다. 1-dodecanethiol SAM 전극과 thiophene SAM전극에서는 폴리머가 3차원적으로 성장하며 필름의 rearrangement를 수반하였지만 BPUS $(Bis(\omega(N-pyrrolyl)-n-undecyl)disulfide)$ SAM 전극에서는 2차원적인 layer-by-layer 성장을 하고 필름의 rearrangement는 관찰되지 않았다. 폴리머가 급격하게 전극 면으로 석출되면 사슬 모양과 도너츠 모양의 폴리머를 만들며, 정류 상태에 이르면서 주름잡힌 폴리머 필름이 생성되는 것이 원자 힘 현미경 (Atomic Force Microscopy) 이미지로 관찰되었다.

• 터널과지하공간
• /
• 제19권6호
• /
• pp.567-582
• /
• 2009

일본의 기후현의 카미오카광산은 지하 약 1,000 m의 대심도에, 우주에서 도래하는 소립자의 관측과 양자의 붕괴현상 등을 연구하기 위한 실험시설 SUPER-KAMIOKANDE가 건설되었다. 이 시설 설계를 위한 기초 자료의 하나로, 초기지압 측정을 실시하여 건설 예정지의 암반 응력 상태를 파악했다. 측정 방법은, 일본 전력중앙연구소(Central Research Institute of the Electric Power Industry)에서 개발한 ８성분 변형률 게이지를 이용한 공경변화법, Sugahara와 Obara가 개발한 16성분 구면 게이지를 이용한 구면 공저변형법, 오스트레일리아의 CSIRO에 의해 개발된 Hollow Inclusion Cell을 이용한 공벽변형률법이다. ３종류의 방법에 의해 얻어진 결과가 일치하지는 않았지만, ６응력성분의 평균치를 이용하여 주응력 방향 및 크기를 결정하였다.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.553-563
• /
• 1994

본 연구에서는 탄소성 지반에서 지반스프링의 Coupling을 고려하여 토류벽의 거동을 해석하였다. 수치해석을 위해 벽체 양측의 지반을 탄소성 스프링으로 단순화하였고, 지반반력계수의 산정을 위해서 Terzaghi가 제안한 주동 및 수동상태에 필요한 수평변위를 p-y 특성곡선에 적용하였다. 본 연구에서 개발된 전산프로그램의 신뢰성은 기존 컴퓨터 프로그램 및 현장 실측치와의 비교를 통해 검증하였다. 검증결과 지반스프링의 Coupling을 고려한 경우가 현장 실측치의 변위 및 토압에 접근함을 알 수 있었고, 모래질 흙에서 주동상태에 필요한 수평변위의 변화가 벽체의 변위에 이주 작은 영향만을 준다는 것을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제15권3호
• /
• pp.504-511
• /
• 2003

Environmental noise at high intensities directly affects human health by causing hearing loss. Although scientific evidence currently is not conclusive, noise is suspected of causing or aggravating other diseases. Environmental noise indirectly affects human welfare by interfering with sleep, thought, and conversation. Noise emission from motorized vehicle includes power unit noise, tire/pavement noise and aerodynamic noise. Among them, tire/pavement noise is noise emission from interaction of the tire and road surface when the vehicle cruises over the surface of pavement. In general, portland cement concrete(PCC) pavement is known to create more noise than asphaltic surfaces though it has the advantage of durability and superior surface friction. However, the results of preliminary laboratory test showed exposed aggregate concrete(EAC) has and effect on reducing tire/pavement noise. Based on the laboratory test. pilot construction of exposed aggregate concrete pavement was completed and series of in-situ measurements were conducted for noise analysis including the pass-by noise measurement and the close-proximity method. Conclusively, it is expected that tire/pavement noise represent significant portion of noise levels at higher frequencies and it would be reduced on special textures of pavement such as exposed aggregate concrete.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.233-234
• /
• 2005