• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.684-688
• /
• 2009

In this paper, it proposes the technique to restore from a binary image in the color image. The color image is composed of three element images of red, green and blue. Therefore, the color image is first divided into a red, green, and blue element, and the Inverse Halftoning[2]$\sim$[4] is processed to each element images. Finally, each element images is collectively displayed. In that case, the Kalman filter was applied to the Inverse Halftoning for the restoration accuracy improvement of the image. As a result, it was possible to restore it in the color image as well as the time of a monochrome image. Moreover, the result that the restoration accuracy had improved even when which combining with the technique by using the Kalman filter for the Inverse Halftoning so far came out.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.191-194
• /
• 2009

PtRu based and PtSn based ternary catalysts were prepared by a conventional impregnation method using NaBH4 as reducing agent. The alloy formation, crystalline size and chemical composition of the in-house catalysts were determined by XRD, TEM and EDX, respectively. The chemical compositions of in-house catalysts were quite similar to the nominal value and good alloy formations were also observed. Further, crystalline sizes of ternary catalysts were comparatively smaller than binary catalysts and were approximately 3.5 ~ 5.5 nm. The electrochemical measurements were carried out in the solution 1 M $H_2SO_4$ with 1 M $C_2H_5OH$ at room temperature. LSV results obtained that ternary catalysts were higher current densities and specific activities. Especially, in case of tungsten addition system, Pt5Sn4W/C have the highest specific activities values and was approximately 21.2 and 3.1 times higher than that of PtRu/C and PtSn/C electrocatalyst.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.59-66
• /
• 1993

Stereo vision is useful in obtaining three dimensional depth information from two images taken from different view points. Neural network modeling for stereo matching, the key step in stereo vision, is defined by an energy function satisfying with three constraints proposed by Marr and Poggio. Stereo matching is then carried out through the network to find minimum energy corresponding to the optimized solution of the problem. An algorithm for stereo matching using an analog neural network is presented here. The network can reduce errors in initial state an early iteration steps by adoption of continuous sigmoid function in stead of binary state. The experimental results show good matching performance for sparse random dot stereogram and real image.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.61.2-61.2
• /
• 2021

SkyMapper is the largest-aperture optical wide-field telescope in Australia and can be used for transient detection in the Southern sky. Reference images from its Southern Survey cover the sky at δ <+10 deg to a depth of I ~ 20 mag. It has been used for surveys of extragalactic transients such as supernovae, optical counterparts to gravitational-wave (GW) and fast radio bursts. We adopt an ensemble-based machine learning technique and further filtering scheme that provides high completeness ~98% and purity ~91% across a wide magnitude range. Here we present an important use-case of our robotic transient search, which is the follow-up of GW event triggers from LIGO/Virgo. We discuss the facility's performance in the case of the second binary neutron star merger GW190425. In time for the LIGO/Virgo O4 run, we will have deeper reference images for galaxies within out to ~200 Mpc distance, allowing rapid transient detection to i ~ 21 mag.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2002

Black hole binary candidates are known to be composed of a black hole with 10 $M_{\odot}$ and a K or M type companion. Because the companion is believed to fill the Roche lobe that is very aspherical, the light curves of black hole binaries are characterized by an ellipsoidal variation. It has been known that the ellipsoidal light curves exhibit asymmetric maximum brightness at the orbital phases 0.25 and 0.75, which has been attributed to star spots or the hot impact points of the accretion flow on to the accretion disk around the black hole. In this paper, it is pointed out that the special relativistic beaming effect contributes to the asymmetry of several percent often observed in the light curves. The typical orbital velocity 400 km $s^{-1}$ observed in black hole binaries may induce the temperature difference $\DeltaT/T$ ~ 1/400 of the late type companion star in the observer`s rest frame, because of the special relativistic Doppler beaming effect. This difference in temperature can result in several per cent of brightness sensitively dependent on the wavelength band, which is comparable to what has been observed in most black hole binary candidates. Considering the significant contribution of the special relativistic Doppler beaming effect, we conclude that the estimation of the sizes and temperatures of the star spots or the hot impact point needs serious revision.

• Clean Technology
• /
• v.25 no.2
• /
• pp.140-146
• /
• 2019

Flammable substances, such as organic solvents, are commonly used in laboratories and industrial processes. The flash point of flammable liquid mixtures is a very important parameter for characterizing the ignition and explosion hazards, and the flash points of mixtures of $C_2{\sim}C_3$ alcohols and 2,2,4-trimethylpentane were measured in the present study. The 2,2,4-trimethylpentane is an important component of gasoline and is frequently used in the petroleum industry as a solvent. Lower flash point data were measured for the binary systems {ethanol + 2,2,4-trimethylpentane}, {1-propanol + 2,2,4-trimethylpentane}, and {2-propanol + 2,2,4-trimethylpentane}. The flash point measurements were carried out according to the standard test method (ASTM D3278) using a Stanhope-Seta closed cup flash point tester. The measured flash points were compared with the predicted values calculated using Raoult's law and also following $G^E$ models: Wilson, Non-Random Two Liquid (NRTL) and UNIversal QUAsiChemical (UNIQUAC). These models were able to predict the experimental flash points for different compositions of {$C_2{\sim}C_3$ alcohols + 2,2,4-trimethylpentane} mixtures with minimal deviations. The average absolute deviation between the predicted and measured lower flash point was less than 1.28 K. A minimum flash point behaviour was observed in all of the systems as in the many observed cases for the hydrocarbon and alcohol mixtures.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.410-421
• /
• 1993

Phase equilibria and reaction paths of the superconducting phases and other compatible phases at $850^{\circ}C$ in the Bi-Sr-Ca-Cu-O system were studied. $Bi_2O_3$ was added to $Sr_2CaCu_2O_x$ by 5% up to 40 mole% Bi in the pseudo-binary $Bi_2O_3-(Sr_2CaCu_2O_x)$ system and the heat treated samples were analysed using XRD. SEM, EDS. and DT A. When Bi contents were greater than 35 mole% Bi, liquid phase was formed which was compatible with $Bi_2Sr_2CaCu_2O_8$ phase. The m.p. of $Bi_2Sr_2CaCu_2O_8$ phase decreased as the content of (Sr+Ca)decreased. $Bi_{2+x}Sr_2CaCu_2O_8$ phase first segregated out of liquid phase around $Bi_2Sr_2CaCu_2O_8$ phase during cooling of liquid phase.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.781-783
• /
• 2000

1bit full adder have 3 input (including carry_in) and 2 outputs(Sum and Carry_out). Because of 1 bit full adder's propagation delay. We usually use 4-bit binary full adder with fast carry, 74LS283. The 74LS283 is positive logic circuit chip. But the logic function of binary adder is symmetrical, so it can be possible to use it not only positive logic but also the negative logic. This thesis use symmetrical property. such as $C_{i+1}(\bar{a_i}\bar{b_i}\bar{c_i})=C_{i+1}{\bar}(a_i,\;b_i,\;c_i)$ and $S_i(\bar{a_i}\bar{b_i}\bar{c_i})=\bar{S_i}(a_i,\;b_i,\;c_i)$. And prove this property with logic operation. Using these property, the 74LS283 adder is possile as the negation logic circuit. It's very useful to use the chip in negative logic. because many system chip is negative logic circuit. for example when we have negative logic chip with 74LS283. we don't need any not gate for 74LS283 input, and just use output of adder(74LS283) as the negation of original output.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.4
• /
• pp.230-237
• /
• 2021

Objectives: This study explored changes in individuals' behavior in response to social distancing (SD) levels and the "no gatherings of more than 5 people" (NGM5) rule in Korea during the coronavirus disease 2019 (COVID-19) pandemic. Methods: Using survey data from the COVID-19 Behavior Tracker, exploratory factor analysis extracted 3 preventive factors: maintenance of personal hygiene, avoiding going out, and avoiding meeting people. Each factor was used as a dependent variable. The chisquare test was used to compare differences in distributions between categorical variables, while binary logistic regression was performed to identify factors associated with high compliance with measures to prevent transmission. Results: In men, all 3 factors were significantly associated with lower compliance. Younger age groups were associated with lower compliance with maintenance of personal hygiene and avoiding meeting people. Employment status was significantly associated with avoiding going out and avoiding meeting people. Residence in the capital area was significantly associated with higher compliance with personal hygiene and avoiding venturing out. Increasing SD levels were associated with personal hygiene, avoiding going out, and avoiding meeting people. The NGM5 policy was not significantly associated with compliance. Conclusions: SD levels, gender, age, employment status, and region had explanatory power for compliance with non-pharmaceutical interventions (NPIs). Strengthening social campaigns to inspire voluntary compliance with NPIs, especially focused on men, younger people, full-time workers, and residents of the capital area is recommended. Simultaneously, efforts need to be made to segment SD measures into substrategies with detailed guidance at each level.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.85-95
• /
• 1994

While bicycles are an exhaust-free and low energy consuming mode of transport, the use of them is getting decreased. The aim of this research is to find out current levels of bicycle ownership and to estimate the ownerships of the bicycles by spatial structure and social factors in the metropolitan area. The parameters which affect on the characteristics of the bicycle ownership are classified into aggregate and disaggregate categories. The ownerships of the bicycles are estimated by the multiple regression analysis using urban characteristics data and the binary logit analysis using household characteristics data. The results of this study to population, car ownership, and number of male in the household, and negatively by the population density.