• Journal of Navigation and Port Research
• /
• v.28 no.2
• /
• pp.149-154
• /
• 2004

A linear power amplifier is particularly emphasized on the system using a linear modulations, such as 16QAM and QPSK with pulse shaping, because intermodulation distortion which causes adjacent channel interference and co-channel interference is mostly generated in a nonlinear power amplifier. In this paper, parameters of a linearization loop, such as an amplitude imbalance, a phase imbalance and a delay mismatch, are briefly analyzed to get a specific cancellation performance and linearization bandwidth Experimental results are presented for IMT-2000 frequency band The center frequency of the feedforward amplifier is 2140MHz with 60MHz bandwidth When the average output power of feedforward amplifier is 20 Watt, the intermodulation cancellation performance is more than 28dB. In this case, the output power of feedforward amplifier reduced 3.5dB because of extra delay line loss and coupling loss. The feedforward amplifier efficiency is more than 7% for multicarrier signals.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2003

A new code, LS code, was proposed for the IMT-2000 CDMA system. The code has special properties during a specific time interval: 1) perfect autocorrelation, and 2) perfect crosscorrelation. Perfect autocorrelation means maximum autocorrelation for zero time-offset and zero autocorrelation for all other times during a specific time interval. Moreover, perfect crosscorrelation means that the crosscorrelation has zero value during a certain time, you can remove all the MAI within that time. However, the detailed properties of LS code and its exact generation method have been previously unknown. Therefore, we investigate the LS code in regards to its exact generating method, properties, and performances in this paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.652-655
• /
• 2004

RF MEMS is a miniature device or an array of integration devices and mechanical components and fabricated with If batch-processing techniques. RF MEMS application area are in phased arrays and reconfigurable apertures for defence and telecommunication systems, switching network for satellite communication, and single-pole double throw switches for wireless application. Recently, RF MEMS switches have been developed for the application to the milimeter wave system. RF MEMS switches offer a substantilly higher performance than PM diode or FET switches. In this paper, SPDT(single-pole-double-throw) switch are designed to use 10 GHz. Actuation voltage and displacement are simulated by tool. And stress and distribution are simulated.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.99-105
• /
• 2019

In this paper, we describe the procedure of simulation design and measured results of a compact planar antenna for handset applications. The broad bandwidth covering the interested frequency band for mobile handset is achieved by introduction of an open ended L-shaped slot which is newly proposed and corresponds to the monopole slot. In order to minimize the impact on circuit part placement, the proposed antenna is placed on the ground plane edge of PCB with size of 60×65 mm². The measurement result for 10dB impedance bandwidths is 640 MHz (1.7~2.34 GHz), covering the required bandwidths for DCS (Digital Cellular System)-1800 (1710 ~ 1880 MHz) / IMT (International Mobile Telecommunication)-2000 (1885 ~ 2200 MHz) bands. In particular, we would like to emphasize the proposed antenna has an omnidirectional radiation pattern suitable for commercial wireless communication.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.581-584
• /
• 2004

Currently, there are many subscriber access networks: PSTN, ADSL, Cellular Network, IMT200 and so on. To these service providers that provide above network service, it is important that they authenticate and authorize legal subscribers and account for their usage. At present, There exist the several protocols that Support AAA(Authentication, Authorization and Accounting) service : RADIUS, Diameter, TACACS+. Nowadays, RADIUS has used for AAA service widely. It has been extended to support other access network environment. So, we extend RADIUS to support environment of Mobile IPv6. Mobile IPv6 uses IPsec as a security mechanism, basically. But, IPsec is a heavy security technology for small, portable, mobile device. Especially, it is serious at IKE, the subset of IPsec. IKE is a key distribution protocol that distributes the key to the endpoints of IPsec. In t:lis paper, we extend RADIUS to support environment of Mobile IPv6 and simplify the IKE phase of IPsec by AAA system distributing the keys by using its security communication channel. Namely, we propose the key distribution method for IPsec SA establishment between mobile node and home agent. The suggested method was anticipated to be effective at low-power, low computing deyice. Finally, end users feel the faster authentication.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.385-388
• /
• 2000

본 논문에서는 좀더 효율적이고 소형화한 GPS(Global Positioning System)용 안테나와 LNA(Low Noise Amplifier)를 IMT-2000 단말기에 내장함으로써 개인 휴대 통신 기능과 더불어 좀 더 정확한 위치추적 기능을 동시에 가능케 하고자 한다. 중심 주파수 1.575 GHz의 저잡음 증폭기와 안테나의 크기는, 합쳐서 10$\times$10$\times$4 (mm)로서 상층은 마이크로스트립 패치 안테나이고, 중간층은 안테나 ground와 LNA ground의 공통 ground이며, 제일 아래층에는 LNA가 위치하게 된다. LNA 의 경우 2단을 중첩하여, 첫째 단 16dB, 둘째 단 18dB의 이득 특성을 보였는데 첫째, 둘째 단의 대역통과 필터에서 삽입손실로 3dB의 손실을 가져와 총 3dB의 이득 특성을 보였다. 잡음 특성은 약 1.9의 특성을 보였다. 안테나의 경우 9$\times$9$\times$$\times$2 (mm)로써, 고유전율( $\varepsilon$$_{r}$ = 73 )의 세라믹을 사용하여 그 크기를 상당부분 줄였다. 그리고 유전체 밑의 ground를 옆면까지 높임으로써 좀 더 소형화한 안테나를 가능케 하였다. 고유전율의 유전체를 사용하였기에 안테나 자체의 이득 특성은 저잡음 증폭기에서 보상하고, 안테나의 임피던스 정합 또한 LNA의 입력 쪽에서 하도록 하였다. 또한 위성신호 수신을 위해 안테나는 RHCP 의 원형편파 특성을 갖는다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2221-2229
• /
• 1998

Handoff is an important parameter for system performance and capacity analysis in CDMA cell planning. In this paper, simulation tool for analyzing the effects of soft handoff on cell planning of CDMA network is developed by studying propagation model in 1.9GHz frequency specrum, soft hadnoff algorithm given by IS-95, and several parameters for CDMA cell planning. By using the tool, soft handoff gain and effects of soft handoff on cDMA system performance and capacity are analyzed. Research results and simulation tool developed in this paper can be used for optimal CDMA cell planning for PCS and IMT-2000 in 1.9GHz frequency spectrum such as locating base station and parameter optimization.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2001.11a
• /
• pp.143-160
• /
• 2001

최근 들어 무선인터넷 및 모바일 컴퓨팅 기술의 급속한 발전과 함께 향후 그 수요가 폭발적으로 증대될 것으로 예상되는 분야가 위치기반서비스(LBS, Location Based Service) 기술이다. 이동통시산업이 발달한 미국 및 유럽의 선진국에서는 지난 수년에 걸쳐 지속적으로 축적되어 온 정보기술을 통하여 현재 수많은 LBS 관련 기술개발이 활발히 진행되고 있다. 1999년 미국의 FCC(미연방통신위원회)는 무선 E119 규칙을 제정하였는데, 이 규칙은 LBS를 주목하게 한 결정적인 계기가 되었다. FCC는 미국내의 망 사업자들이 2001년 10월까지 이동전화 사용자가 응급 호출(911)을 하였을 때 67%는 100M 이내의 위치오차로, 95%는 300M 이내의 위치오차로 응급호출자의 위치정보를 제공해야 한다는 규정을 제정했다. 이때부터 각종 관련 회사들이 생겨나기 시작했으며, 사람들이 LBS에 관심을 가지기 시작하였다. 국내에서도 이동통신사업자 및 IMT-2000 사업자를 중심으로 LBS 도입을 적극 준비하고 있는 상황이다. 그러나 위치정보라는 것은 오래 전부터 사람들이 알고있던 사항이다. 이미 GPS라는 것을 이용하여 국방분야, 환경분야, 교통 및 물류 분야에서 많이 활용되고 있었기 때문이다. 그런데 왜 같은 위치정보를 활용하는 분야인데 LBS는 이토록 많은 관심을 불러일으키는가? 그것에 대한 답변은 바로 위치정보가 이동통신망과 연결되면서 대중적이고 일반적인 서비스가 가능해졌기 때문이다. 특히, LBS는 GIS가 정보통신 기술과 융합되면서 앞으로 추구해야 할 차세대 정보기술 분야라는 점에서 그 의미는 더 크다고 할 수 있다. 평균(平均) 0.322였다. 그리고 RaA를 모핵종(母核種)으로 가정(假定)했을 때 각핵종간(各核種間)의 방사평형비(放射平衡比)는 대개 $C_1>C_2>C_3$인 것으로 나타났다. 여기서 $C_1,\;C_2$ 및 $C_3$는 각각 RaA, RaB 및 RaC의 농도(濃度)를 나타낸다.0cm 깊이에서는 Pythium균(菌)과 Fusarium균(菌)을 제외(除外)하고 모두 14일간(日間)에 사멸(死滅)하였다. 6. 최고(最高)에 달(達)했다가 최저(最低)에 이르는 온도(溫度)의 반복적(反復的)인 파동(波動)이 있는 것에서 없는 것보다 단시간(短時間)에 사멸(死滅)하였다. 이상(以上)의 결과(結果)에서 볼 때 하기고온기(夏期高溫期)의 재배(栽培) 휴한기(休閑期)에 PVC film을 사용(使用)하여 하우스를 밀폐(密閉)하거나 턴널을 만들어서 태양열(太陽熱)을 이용(利用)한 토양소독(土壤消毒)의 가능성(可能性)이 충분(充分)히 있는 것으로 생각된다.종합적(綜合的)으로 볼 때, diazinon 과 decamethrin의 처리(處理)는 포장(圃場)에서 벼멸구의 산란력(産卵力)과 성충수명을 증대(增大)시키고, 식이활동(食餌活動)을 촉진(促進)함으로서 벼멸구의 resurgence를 유발(誘發)하고 아울러 수도체(水稻體)의 hopperbun을 가속화시킬 가능성(可能性)이 있음을 알 수 있었다.는 점차 약하여 졌으나 catalase, invertase는 그 활성도가 일단 숙성중기에 높아졌다가 낮아졌다.n 이 pH 4.2이고 temperature는 $60^{\circ}C$이었다. 그리고

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.690-693
• /
• 2002

According to the growth of communication biz, embedded market rapidly developing in domestic and overseas. Embedded system can be used in various way such as wire and wireless communication equipment or information products. There are lots of developing performance applying speech recognition to embedded system, for instance, PDA, PCS, CDMA-2000 or IMT-2000. This study implement minimum memory of speech recognition engine and DB for apply real time embedded system. The implement measure of speech recognition equipment to fit on embedded system is like following. At first, DC element is removed from Input voice and then a compensation of high frequency was achieved by pre-emphasis with coefficients value, 0.97 and constitute division data as same size as 256 sample by lapped shift method. Through by Levinson - Durbin Algorithm, these data can get linear predictive coefficient and again, using Cepstrum - Transformer attain feature vectors. During HMM training, We used Baum-Welch reestimation Algorithm for each words training and can get the recognition result from executed likelihood method on each words. The used speech data is using 40 speech command data and 10 digits extracted form each 15 of male and female speaker spoken menu control command of Embedded system. Since, in many times, ARM CPU is adopted in embedded system, it's peformed porting the speech recognition engine on ARM core evaluation board. And do the recognition test with select set 1 and set 3 parameter that has good recognition rate on commander and no digit after the several tests using by 5 proposal recognition parameter sets. The recognition engine of recognition rate shows 95%, speech commander recognizer shows 96% and digits recognizer shows 94%.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.76-84
• /
• 2000

Communication systems, including cell-based mobile communication systems, multiple satellite communication systems of multi-beam satellite systems, require reliable handoff methods between cell-to-cell, satellite-to-satellite of beam-to-team, respectively. Recent measurement of a CDMA cellular system indicates that the system is in handoff at about 35% to 70% of an average call period. Therefore, system reliability during handoff is one of the major system performance parameters and eventually becomes a factor in the overall system capacity. This paper presents novel and improved techniques for handoff in cellular communications, multi-beam and multi-satellite systems that require handoff during a session. this new handoff system combines the soft handoff mechanism currently implemented in the IS-95 CDMA with code and packet diversity combining techniques and an iterative decoding algorithm (Turbo Coding). the Turbo code introduced by Berrou et all. has been demonstrated its remarkable performance achieving the near Shannon channel capacity [1]. Recently. Turbo codes have been adapted as the coding scheme for the data transmission of the third generation international cellular communication standards : UTRA and CDMA 2000. Our proposed encoder and decoder schemes modified from the original Turbo code is suitable for the code and packet diversity combining techniques. this proposed system provides not only an unprecedented coding gain from the Turbo code and it iterative decoding, but also gain induced by the code and packet diversity combining technique which is similar to the hybrid Type II ARQ. We demonstrate performance improvements in AWGN channel and Rayleigh fading channel with perfect channel state information (CSI) through simulations for at low signal to noise ratio and analysis using exact upper bounding techniques for medium to high signal to noise ratio.