• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.15-21
• /
• 2007

본 논문에서는 Impulse-radio-based Ultra Wideband (IR-UWB)를 이용한 에너지 검출 기반의 비동기 수신기에서 저사양의 ADC와 간단한 디지털 회로 만으로 이루어진 심벌 동기 획득(acquisition) 및 심벌 동기 추적(tracking) 방식을 제안한다. 기존의 심벌 동기 방식이 정확한 심벌 동기 '시점을 찾는 것에 초점을 맞추었다면, 제안하는 방식은 심벌 동기 '구간'을 찾아 그 구간 내에서 데이터를 판단함으로써 하드웨어 복잡성을 낮추었고, 전력 소모를 줄였다. 이를 위해 심벌 동기 구간에 해당하는 BDW (Bit Decision Window)를 정의하고 SNR(Signal to Noise Ratio), 하드웨어 자원 및 BDW의 크기와 BER (Bit Error Rate)와의 관계를 분석하였다. 주어진 SNR과 하드웨어 자원으로 BER을 최소화하기 위한 BDW의 크기를 구한다. 제안한 알고리즘은 실제 임펄스 채널 특성을 고려하여 모의실험을 통하여 검증하였다.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1066-1071
• /
• 2017

Recently high voltage impulse (HVI) technique has been extensively studied for desalting processes to control the $CaCO_3$ scale formation in industrial water practices such as power plant, boiler, and heat exchange operations. Investigation of the operational parameters for the HVI is important, however, those had not been reported yet. In this study, the effect of initial feed volume and contact time on reduction of calcium ion concentration by the HVI technique was investigated. Initial feed volumes of artificial hard water which contained 100 mg/L of $Ca^{2+}$, were set to 1, 2, and 3 L respectively. After 24hr of HVI contact with 12kV, $Ca^{2+}$ ion was reduced to 50, 29 and 19 % of their initial concentration, indicating that calcium removal increased as initial feed volume decreased. This implies the applied HVI pulse energy per unit mass of calcium is important parameter determining overall desalting efficiency. A series of extended operations of HVI up to 30 days verified the long term stability of the HVI system. The calcium ion declined to 40 mg/L after 2~3 days, and further reduction of calcium was not achieved, indicating that optimum operation time could be 2~3 days under these experimental conditions. Consequently, it was confirmed that the important operational parameter of HVI technique is initial feed volume and contact time as well as the applied voltage that was already proven in the previous study.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1422-1430
• /
• 2000

S(Synchronous)-CDMA is a new cable modem technology applicable to the upstream channel for high speed multimedia communication using CATV networks. In this paper we analyze the transmitting and receiving process of S-CDMA scheme based on Terayon patent and derive bit error probability of S-CDMA and TDMA scheme in the $\varepsilon$-mixture impulse noise model which appropriately reflects impulse noise characteristics of upstream channel by using various parameters. This analysis results are a good match with the simulation results. We also compare Eb/No gain performance of S-CDMA with TDMA in 16, 32, 64, QAM.

• Structural Monitoring and Maintenance
• /
• 제3권4호
• /
• pp.395-406
• /
• 2016

Modal parameter identification has received much attention recently for their usefulness in earthquake engineering, damage detection and structural health monitoring. The identification method based on Matrix Pencil technique is adopted in this paper to identify structural modal parameters, such as natural frequencies, damping ratios and modal shapes using impulse vibration responses. This method can also be applied to dynamic responses induced by stationary and white-noise inputs since the auto- and cross-correlation function of the two outputs has the same form as the impulse response dynamic functions. Matrix Pencil method is very robust to noise contained in the measurement data. It has a lower variance of estimates of the parameters of interest than the Polynomial Method, and is also computationally more efficient. The numerical simulation results show that this technique can identify modal parameters accurately even if the noise level is high.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.774-777
• /
• 2002

There are various methods to join mechanical structures together. They typically include welding, mechanical joints by bolts and other processes depending on specific needs. Analyses of joints in the mechanical structures are essential in understanding the dynamic characteristics of the structures. In this research an impulse technique is applies to investigate the dynamic behavior of joints produced by bolts. The length overlap in the joints was varied as the number of the bolts in the joins was changed. Also, the torque applied to the bolts were adjusted. Resonance frequencies were determined for the joints to evaluate the relationship between the increase in the applied torque and the increase in the number of bolts used in the joints. The results have demonstrated that the resonance frequencies of the joints increase with the increasing torque.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1802-1812
• /
• 2001

The theoretical method is developed to investigate the effects of ring stiffeners on free vibration characteristics and transient response for the ring stiffened composite cylindrical shells subjected to the impulse pressure Loading. In the theoretical procedure, the Love's thin shell theory combined with the discrete stiffener theory to consider the ring stiffening effect is adopted to formulate the theoretical model. The concentric or eccentric ring stiffeners are laminated with composite and have the uniform rectangular cross section. The modal analysis technique is used to develop the analytical solutions of the transient problem. The analysis is based on an expansion of the loads, displacements in the double Fourier series that satisfy the boundary conditions. The effect of stiffener's eccentricity, number, size, and position on transient response of the shells is examined. The results are verified by comparison with FEM results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.484-490
• /
• 2008

For CSLDV, the Chebyshev demodulation (or polynomial) technique and Hilbert transform approach have been used for mode shape reconstruction with harmonic excitation. In this paper, the Hilbert-Huang transform approach was applied as an alternative to impact excitation cases in terms of a numerical approach. The vibration of the tested structure is modeled using impulse response functions. In order to verify this technique, a simply supported beam was chosen as the test rig. With additional innovative steps which are the ideal-band pass filter and the nodal point determination, Hilbert-Huang transformation can be used for a good mode shape reconstruction even in the impact excitation case.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.883-888
• /
• 2001

The theoretical method is developed to investigate the effects of ring stiffeners on free vibration characteristics and transient response for the ring stiffened composite cylindrical shells subjected to the impulse pressure loading. In the theoretical procedure, the Love's thin shell theory combined with the discrete stiffener theory to consider the ring stiffening effect is adopted to formulate the theoretical model. The concentric or eccentric ring stiffeners are laminated with composite and have the uniform rectangular cross section. The modal analysis technique is used to develop the analytical solutions of the transient problem. The analysis is based on an expansion of the loads, displacements in the double Fourier series that satisfy the boundary conditions. The effect of stiffener's eccentricity, number, size, and position on transient response of the shells is examined. The theoretical results are verified by comparison with FEM results.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.83-90
• /
• 2009

A new IRF (Impulse Response Function) analysis technique in high resolution SAR image is presented by taking into account the real clutter environment. In order to investigate the realistic effect of clutter background on the impulse response function of SAR image, an ideally generated impulse response function is superimposed with a large number of background clutter data which are extracted from the various regions of an actual SAR image. As a performance measure, PSLR (Peak Sidelobe Ratio) of the clutter-contained IRF is presented in the various groups of clutter background, and finally the results are compared with the stochastic model.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.333-337
• /
• 2003

This paper proposed new techniques of rotor position detection for 8/6 pole Switched Reluctance Motor(SRM). This technique is very simple and easy to find out rotor position. The main idea uses the impulse responses which have different values between aligned and unaligned rotor position. In order to obtain the informations of the rotor position, the impulse applied to the unenergized phases and their responses are analyzed to control the speed of SRM without shaft sensor. Experimental results verify the feasibility of the proposed method.