• 제목/요약/키워드: Impulse technique

검색결과 259건 처리시간 0.026초

절연유체 내 2상유동을 고려한 뇌임펄스 응답 유한요소해석 (Finite Element Analysis for Dielectric Liquid Discharge under Lightning Impulse Considering Two-Phase Flow)

  • 이호영;이종철;장용무;이세희
    • 전기학회논문지
    • /
    • 제60권11호
    • /
    • pp.2097-2102
    • /
    • 2011
  • Discharge analysis technique for dielectric liquid was presented by using the Finite Element Analysis (FEA) under a lightning impulse incorporating two-phase flow phenomena which described gas and liquid phases in discharge space. Until now, the response of step voltage has been extensively explored, but that of lightning impulse voltage was rarely viewed in the literature. We, therefore, developed an analyzing technique for dielectric liquid in a tip-sphere electrode stressed by a high electric field. To capture the bubble phase, the Heaviside function was introduced mathematically and the material functions for the ionization, dissociation, recombination, and attachment were defined in liquid and bubble, respectively. By using this numerical setup, the molecular dissociation and ionization mechanisms were tested under low and high electric fields resulted from the lightning impulse voltage of 1.2/50 ${\mu}s$. To verify our numerical results, the velocity of electric field wave was measured and compared to the previous experimental results which can be viewed in many papers. Those results had good agreement with each other.

적응 문턱치 알고리즘을 이용한 충격잡음 제거 (Impulse Noise Cancellation Using Adaptive Threshold Algorithm)

  • 이진;박종환;김세동;이영석;김성환
    • 한국음향학회지
    • /
    • 제19권8호
    • /
    • pp.26-34
    • /
    • 2000
  • This paper presents a new adaptive impulse noise cancelling technique based on the adaptive nonlinear suppressing function. The proposed "adaptive threshold algorithm (ATA)" is controlled by the normalized power prior input data term, and this adaptive threshold makes the cancelling system highly robust against additive impulse noise. For the performance evaluation, we have tested the proposed algorithm with the observed signals simulated in various impulsive noise environments and real EMG signals. As a result the proposed algorithm shows superior performance of 51.7% to the available techniques in the points of SNR and MSE.

  • PDF

주파수영역 최적위치기반 임펄스 삽입에 따른 OFDM-CQAM 시스템의 PAPR 개선 (PAPR Improvement of OFDM-CQAM System through Optimum Position based Impulse Insertion in Frequency Domain)

  • 곽재민
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2019년도 춘계학술대회
    • /
    • pp.597-599
    • /
    • 2019
  • OFDM 시스템에서 송신단의 IFFT(inverse fast fourier transform) 이전에 주파수 영역에서 높은 크기의 임펄스를 삽입하면, 쌍대성 특성으로 인해 시간영역의 OFDM 신호의 PAPR 감소 효과를 가져올 수 있다. 본 논문에서는 CQAM(cross quadrature amplitude modulation) 방식을 채용하는 OFDM 통신시스템에서 송신단의 IFFT 이전에 임펄스를 삽입함으로서 개선되는 PAPR 성능을 분석한다. 또한 PAPR을 최소화시킬 수 있는 최적의 임펄스 삽입위치 찾아내고 이를 적용하였을 경우의 PAPR 개선효과를 검증한다.

  • PDF

초광대역 임펄스를 이용한 고해상도 지반탐사 이미지 레이더 (High resolution groud penetrating image radar using an ultra wideband (UWB) impulse waveform)

  • 박영진;김관호;이원태
    • 대한전자공학회논문지TC
    • /
    • 제42권11호
    • /
    • pp.101-106
    • /
    • 2005
  • 초광대역 임펄스를 이용한 비파괴 지중 금속 매설물 탐지용 지반 탐사 레이더(Ground penetrating image radar:GPR)를 개발하였다. 탐사 지면의 상대 유전율을 측정하였고, 최대 탐사 깊이 1m 이내의 측정이 가능하도록 시스템을 설계하였다. 전체 경로 감쇄, 시스템의 크기, 해상도를 고려하여 최고 주파수 및 최저 주파수를 선택하였다. 선택된 주파수에 맞는 1 나노세컨더(ns) 이하의 상승 시간을 갖는 초광대역 임펄스를 선택하였으며, 사용한 임펄스의 주파수 범위를 고려하여 소형 평판형 초광대역 다이폴 안테나를 설계하였다. 또한, 지중으로부터 반사되는 신호를 수신하기 위해서 디지털 오실로스코프를 사용하였다. 측정은 monostatic 방식과 마이그레이션(migration) 기법을 사용하였다. 지중 매설물의 영상 처리를 위해서는 A-scan 및 B-scan 평균 제거 방식을 사용하였다. 개발된 시스템은 금속 물체와 비금속 물체가 매설된 실증 시험장에서 시험되었고, 수 센티미터 직경의 작은 지중 금속 매설물까지도 탐지할 수 있는 우수한 성능을 가짐을 보였다.

임펄스 모델에 의한 SAW Transversal Filters의 주파수 응답 특성 (Frequency Response Properties of SAW Tansversal Filters by Impulse Modeling)

  • 손헌영;윤영섭
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.173-176
    • /
    • 1999
  • Frequency responses of the surface acoustic wave(SAW) filters are simulated by using the impulse modeling. The simulation technique of the SAW filters is to use the Fourier transformation to make a correspondence between the impulse response of the filter and the taps in the delay line. Since the Fourier series must be truncated after a finite number of terms, window functions are often used to weight the coefficients to obtain the desirable side-lobe level and bandwidth. The filter design is operated through the iterative simulation procedures. The design process is capable of yielding filters with optimized frequency response characteristics.

  • PDF

최소 분산 캡스트럼을 이용한 노이즈속에 묻힌 임펄스 검출방법-이론 (Detection of Impulse Signal in Noise Using a Minimum Variance Cepstrum-Theory)

  • 최영철;김양한
    • 소음진동
    • /
    • 제10권4호
    • /
    • pp.642-647
    • /
    • 2000
  • Conventional cepstrum has been widely used to detect echo and fault signals embedded in noise. One of the problems of finding impulse signals using the conventional cepstrum in that it is normally very sensitive to signal to noise ratio (SNR). This paper proposes a signal processing method to detect impulse signal in noisy environment. Because the proposed method minimizes the variance of signal power at a cepstrum domain, it is suggested to be called as minimum variance cepstrum (MV cepstrum). Computer simulations have been performed to understand the characteristics of the MV cepstrum. Both mathematical approach and computer simulations confirmed that the MV cepstrum is a useful technique to detect impulse in noisy environment.

  • PDF

A New Efficient Impulse Noise Detection based on Rank Estimation

  • 오진성;김유남
    • 융합신호처리학회논문지
    • /
    • 제9권3호
    • /
    • pp.173-178
    • /
    • 2008
  • In this paper, we present a new impulsive noise detection technique. To remove the impulse noise without detail loss, only corrupted pixels must be filtered. In order to identify the corrupted pixels, a new impulse detector based on rank and value estimations of the current pixel is proposed. Based on the rank and value estimations of the current pixel, the new proposed method provides excellent statistics for detecting an impulse noise while reducing the probability of detecting image details as impulses. The proposed detection is efficient and can be used with any noise removal filter. Simulation results show that the proposed method significantly outperforms many other well-known detection techniques in terms of image restoration and noise detection.

  • PDF

MEASUREMENT OF LONG IMPULSE RESPONSE BY USING A TIME-STRETCHED PULSE

  • Kim, Hack-Yoon;Asano, Futoshi;Suzuki, Yoiti;Sone, Toshio
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
    • /
    • pp.867-872
    • /
    • 1994
  • The transfer function of an acoustic system, in general, often exhibits a wide dynamic range and a very long impulse response. The time-stretched pulse (TSP) proposed by Aoshima (ATSP) has a small peak-factor and is accordingly suitable for the measuring impulse responses. The pulse is not so suitable, however, for the measurement of impulse responses over a wide frequency range. In this paper, we try to generalize and optimize this method (OATSP). This makes the method applicable for measuring of impulse responses longer than the length of the TSP. An analysis of error in such a case is also shown. Finally, we discuss how to implement this technique in specific measurement conditins.

  • PDF

임펄스 GPIR시스템의 시간영역 최적화 설계 (Optimization Design in Time Domain on Impulse GPIR System)

  • 김관호;박영진;윤영중
    • 대한전자공학회논문지TC
    • /
    • 제46권3호
    • /
    • pp.32-39
    • /
    • 2009
  • 본 논문은 초광대역 임펄스를 이용한 지반탐사 영상레이더 시스템 (Ground Penetrating Image Radar; GPIR) 설계에서 수직심도의 해상도를 높이기 위한 시간영역 관점에서의 최적화 설계방법을 제시하였다. 시스템의 핵심 부분인 임펄스 발생원 및 초광대역 안테나에 대하여 시간영역에서의 해석 기법을 제시하였고, 시뮬레이션에 의해 최적 설계 파라미터를 설정하였다. 특히, 임펄스 신호의 파형을 정형화하여 임펄스 신호의 스펙트럼 효율을 높였으며, 초광대역 안테나로는 U자형 평판형 다이폴 안테나를 사용하였다. 제안된 안테나는 반사체를 사용하여 외부 잡음을 차단하였고, 지중과의 신호 결합을 개선하였다. 또한 시스템의 성능을 열화시키는 안테나에 의한 떨림을 제거하기 위해, 저항을 사용하였고, 송수신 안테나는 시간영역 시뮬레이션을 통하여 최적화 하였다. 지중 매질의 영상화를 위해 마이그레이션을 기법을 사용하였으며, 지면의 영향 등에 의한 수신된 펄스의 왜곡 현상은 시간영역에서의 잡음 및 신호 왜곡 저감 기법을 사용하여 성능을 개선하였다. 최적화된 설계 방법의 평가를 위하여, 지중 매설물 탐지용 레이더 시제품을 개발하였고, 성능 시험을 위한 시험장을 활용하였다. 측정 결과 수직 심도는 이론적 인 해 상도만큼 우수한 성능을 보였다.

콘크리트 슬래브궤도의 휨강성 평가를 위한 비파괴 탄성파 기법의 개발 (Development of a Nondestructive Seismic Technique for Flexural Rigidity of Concrete Track as Slab Displacement Index)

  • 조미라;조성호;이일화
    • 대한토목학회논문집
    • /
    • 제28권6D호
    • /
    • pp.905-913
    • /
    • 2008
  • 최근 고속전철의 자갈도상에 대한 대안으로 콘크리트 슬래브궤도가 도입되어 고속전철 신규노선에 시공되고 있다. 콘크리트 슬래브궤도는 자갈도상에 비해 내구성, 유지관리 측면에서의 경제성, 열차운행의 안정성 등의 측면에서 우위에 있지만, 우수 및 지하수로 인한 노반강성의 저하, 연약한 원지반의 침하 등으로 인한 슬래브궤도의 처짐은 열차안정성에 치명적인 결함이 된다. 본 연구에서는 슬래브궤도의 처짐 지표로서 슬래브궤도의 휨강성을 설정하고, 슬래브궤도의 휨강성을 2차원 영상으로 표현할 수 있는 FRACTAL (Flexural-Rigidity Assessment of Concrete Tracks by Antisymmetric Lamb Waves) 기법이라는 비파괴 탄성파 기법을 제안하였다. 이론적 근거 확보를 위하여 콘크리트 슬래브궤도에서의 탄성파 시험을 수치해석적으로 모사하여 영향인자 연구를 수행하였고, FRACTAL 기법의 적용성 평가를 위하여 실제 고속전철 슬래브궤도에 적용하여 보았다. 그리고 FRACTAL 시험측선과 동일 측선에서 Impulse-Response 기법과 인접지반에서 전기비저항시험을 수행하여, FRACTAL 기법의 신뢰성을 검증하였다.