• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.100-108
• /
• 2008

접지전극의 형태, 크기, 재질 및 임펄스전류의 형상에 따라 변화하는 과도접지임피던스는 접지시스템의 성능에 중요한 영향을 미친다. 본 논문은 기존의 실효임펄스임피던스가 실제 과도접지임피던스를 얼마나 효과적으로 나타내고 있는가에 대한 분석과 보다 효과적인 과도접지임피던스 평가방법에 대하여 실험적인 결과를 제시하였다. 실험에 사용된 접지전극은 저항성분과 인덕턴스를 포함한 모의 접지전극과 1[m] 탄소접지봉, 9[m] 일반동봉 그리고 40[m] 매설지선이며, 가변주파수 전류와 임펄스전류에 의한 접지임피던스를 각각 측정하였다. 각각의 값을 비교 했을 때 기존의 실효임펄스임피던스의 값보다는 전압의 최대 값과 전류의 최대 값을 이용하여 과도접지임피던스를 구한 임피던스 값($Z_1$)이 등가주파수에 해당하는 가변주파수 전류에 의해 구해진 접지임피던스에 근접함을 확인하였다.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.89-94
• /
• 1998

With increasing demands on automatic and high-capability manufacturing, the dynamic performance of machine tools becomes more and more important. In this paper, the correlation between dynamic compliance of the cutting system and the commencing point of chatter vibration in turning is checked by impulse excitation method and cutting tests for some cutting system. The correlation between chucking conditions of workpiece and the commencing point of chatter vibration is clarified, and it is proven that there is a mutual relations between them. Chatter vibration commenced at certain level of dynamic compliance of the cutting system regardless of the kind of the system. It shows the possibility of dynamic performance test of a lathe by means of impulse excitation method.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.248-253
• /
• 2005

Although DC ground resistance is a good index of grounding performance for grounding electrodes, it does not reflect the grounding performance during transient state. Besides, impulse ground impedance, which is defined by a ratio of the peak value of transient ground potential rise to the peak value of impulse current, cannot be an absolute index due to its dependence on impulse current shape. In this paper, ground impedance of various rod-type ground electrodes has been measured in frequency domain ranging from 1 Hz to hundreds of kHz. Equivalent circuit models of the ground rod have been identified from the measured values of ground impedance in frequency domain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.694-696
• /
• 2005

Although DC ground resistance is a good index of grounding performance for grounding electrodes, it does not reflect the grounding performance during transient state. Besides, impulse ground impedance, which is defined by a ratio of the peak value of transient ground potential rise to the peak value of impulse current, cannot be an absolute index due to its dependence on impulse current shape. In this paper, ground impedance characteristics of ground electrodes has been measured in frequency domain ranging from 1 Hz to hundreds of kHz. Equivalent circuit models and transfer function models of the ground rod have been identified from the measured values of ground impedance in frequency domain.

• ETRI Journal
• /
• 제29권6호
• /
• pp.716-724
• /
• 2007

As ultra-wideband impulse radio (UWB-IR) uses short-duration impulse signals of nanoseconds, even a small number of timing errors can cause a detrimental effect on system performance. A delay-locked loop (DLL) is proposed to synchronize and reduce timing errors. The design of the DLL is vital for UWB systems. In this paper, an improved DLL is introduced to a UWB-IR time-hopping spread-spectrum system. Instead of using only two central correlator branches as in a conventional DLL, the proposed system uses two additional correlator branches with different delay parameters and different weight parameters. The performance of the proposed schemes with the optimal parameters is compared with that of traditional schemes through simulation: the proposed four-branch DLLs achieves less tracking jitter or a longer mean time to lose lock (MTLL) than the conventional two-branch DLLs if proper parameters are chosen.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.284-290
• /
• 2006

For the case of high head and critical low flow rate range of micro hydropower resources, it requires very low specific speed turbines which are lower than conventional impulse turbine's specific speed. In order to satisfy the request for very low specific speed turbine with high efficiency, a new positive displacement turbine is developed. The performance characteristics of the new turbine is tested and compared with a conventional impulse turbine, which is used for automatic water faucet system. The purpose of present study is to develop an high performance turbine that can be used to extract micro hydropower potential of a water supply system. The test results show that the positive displacement turbine is much more efficient than the conventional turbine and it can sustain high efficiency under the wide range of operating conditions. The pressure pulsations at the inlet and outlet of the positive displacement turbine can be considerably minimized by using simple pressure damper.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.151-158
• /
• 2003

The impulse noise of bullet after shooting in small arms has an effect on the hearing ability of human. Although a silencer has been developed for noise reduction in small arms, there is only a few researches about relationships between the sound pressure level and the auditory sense of human. In this study, the quantitative sound pressure levels are revealed by experimental measurements of impulse noise with each silencer type. And the performance evaluation for noise suppression of a silencer in small arms is carried out to reduce a serious loss of the hearing ability of the small arms user. It is concluded that the evaluated results can be utilized for checking sound pressure and data accumulation for new small arms design with silencer.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.148-154
• /
• 2004

As a rocket propellent of hydrocarbon fuels, the characteristics of liquefied natural gas was evaluated with the viewpoint of the constituents and content, the cooling performance as a coolant, and characteristic velocity and specific impulse as parameters of the engine performance. Content of methane was a principal factor to determine the characteristics as a rocket propellant and more than 90 % of it was needed as a fuel and coolant in the regenerative cooled liquid rocket engine. Some constituents of the liquefied natural gas can be frozen by the pre-cooling of the pipe lines, therefore they can be a factor disturbing the normal working of engine. In case the content of methane is around 90% in the liquefied natural gas, a normalized stoichiometric O/F mixture ratio of 0.75 is suggested for a nominal operation condition to get the maximum specific impulse and characteristic velocity.

• 한국해양공학회지
• /
• 제18권6호
• /
• pp.1-7
• /
• 2004

This paper deals with the performance analysis of the impulse turbine for a owe type wave energy conversion device. Numerical analysis was performed using the commercially-available software FLUENT. This parametric study includes variation of the setting angle of the guide vane. Since parametric study at various flow coefficients requires a tremendous amount of computing time, two-dimensional cascade flow approximation was employed to determine the optimum principal particulars in a rather simple manner. A Full three-dimensional calculation was also performed for several cases to confirm the validity of the two-dimensional approach. Results were compared to other experimental data, such as Setoguchi et al. (2001)'s extensive set of data, and found that the usefulness of 2-D analysis was well demonstrated. The advantages of each method were also evaluated.

• 한국통신학회논문지
• /
• 제31권9C호
• /
• pp.905-913
• /
• 2006

펄스 방식(Impulse radio)의 초광대역(Ultra-Wideband) 시스템의 타이밍 동기과정에서 획득/추적 과정이 이상적으로 수행되더라도 잔여 타이밍 오차는 존재하게 된다. 이러한 잔여 타이밍 오차는 시스템의 성능에 큰 영향을 미치게 된다. 본 논문에서는 상관 검출 수신기에서 미세 타이밍 오차를 보상하기 위해 보조신호(Reference signal)를 이용한 디지털 위상고정 루프(Digital Phase-Locked Loop)를 제시한다. 우선, 미세 타이밍 오차에 의한 비트에러률(Bit Error Rate:BER)의 성능 열화를 고찰한 후, 타이밍 추적기를 사용함으로써 타이밍 오차가 보상되는 과정과 보상 후 BER 성능을 제시한다. 그리고 타이밍 검출기는 보조신호와 수신신호간의 상관을 이용하는 방식이 제안되었으며 샘플링 주기는 프레임 단위로 이루어지도록 설계되었다. 또한, 본 논문은 성능비교를 위해 여러 종류의 가우시안 모노사이클 펄스에 대해 성능 평가를 수행한다.