• Title/Summary/Keyword: Impulse area

Search Result 175, Processing Time 0.028 seconds

Pulmonary Functions and Inflammatory Biomarkers in Post-Pulmonary Tuberculosis Sequelae

  • Shanmugasundaram, Kumar;Talwar, Anjana;Madan, Karan;Bade, Geetanjali
    • Tuberculosis and Respiratory Diseases
    • /
    • v.85 no.2
    • /
    • pp.175-184
    • /
    • 2022
  • Background: Post-tuberculosis (TB) sequelae is a commonly encountered clinical entity, especially in high TB burden countries. This may represent chronic anatomic sequelae of previously treated TB, with frequent symptomatic presentation. This pilot study was aimed to investigate the pulmonary functions and systemic inflammatory markers in patients with post-TB sequelae (PTBS) and to compare them with post-TB without sequelae (PTBWS) participants and healthy controls. Methods: A total of 30 participants were enrolled, PTBS (n=10), PTBWS (n=10), and healthy controls (n=10). Pulmonary function tests included spirometry and measurement of airway impedance by impulse oscillometry. Serum levels of matrix metalloproteinase (MMP)-1, transforming growth factor-β, and interferon-γ were estimated. Results: Slow vital capacity (SVC), forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), FEV1/FVC, and peak expiratory flow were significantly lower in PTBS as compared to controls. SVC and FEV1 were significantly less in PTBS as compared to PTBWS. Total airway impedance (Z5), total airway resistance (R5), central airway resistance (R20), area of reactance (Ax), and resonant frequency (Fres) were significantly higher and respiratory reactance at 5 and 20 Hz (X5, X20) were significantly lower in PTBS as compared to PTBWS. Spirometry parameters correlated with impulse oscillometry parameters in PTBS. Serum MMP-1 level was significantly higher in PTBS as compared to other groups. Conclusion: Significant pulmonary function impairment was observed in PTBS, and raised serum MMP-1 levels compared with PTBWS and healthy controls. Follow-up pulmonary function testing is recommended after treatment of TB for early diagnosis and treatment of PTBS.

Numerical Study of the effect of pintle shape on the thrust level (핀틀 형상이 추력 크기에 미치는 영향에 대한 수치해석적 연구)

  • Kim, Joung-Keun;Park, Jong-Ho
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.5
    • /
    • pp.476-482
    • /
    • 2009
  • The effect of pintle shape on the thrust level of pintle-nozzle Solid Rocket Motor(PNSRM) was studied numerically using the Spalart-Allmaras turbulent model of Fluent. Mass flow rate of PNSRM was always less than theoretical value and the extent of decrease in mass flow rate grew in the large pintle because of increase in the relative boundary layer thickness between pintle body and nozzle wall. The bigger pintle size was, the more thrust of pintle tip pressure was obtained. Meanwhile the more thrust of nozzle and chamber pressure decreased. Hence, total thrust of big pintle was less than a small pintle under same throat area condition. Specific impulse was relatively flat for all pintle shape.

Numerical Analysis of Flow Characteristics within Blades for Design Parameters of Impulse Supersonic Turbine Blade (충동형 초음속 터빈 익렬의 설계 변수에 따른 익렬내 유동 특성에 관한 수치적 연구)

  • 신봉근;정수인;김귀순;이은석
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.8 no.2
    • /
    • pp.62-72
    • /
    • 2004
  • In this paper. firstly, numerical results were compared with experimental results to verify accuracy of the results. It is found that the numerical results show good agreements with experimental result. Next, computations about flow within blades for design parameters such as radius of the pressure and suction side's curvature and pitch-chord ratio have been performed. It is found that the flow and performance characteristics mainly depend on shocks occurred at the leading edge of blades and the end of nozzle and separations occurred inside the flow passage. And shock of nozzle and separations depend upon area of flow passage and shocks of blade are affected by the number of blades occupied by a nozzle.

Factors Influencing Run Away Impulse in Early Adolescents (초기 청소년의 가출 충동에 영향을 미치는 요인)

  • Ryu, Seung-Hee;Park, Kyung-Sook;Seo, Min-Sook
    • Research in Community and Public Health Nursing
    • /
    • v.23 no.1
    • /
    • pp.1-12
    • /
    • 2012
  • Purpose: This study carried out a preliminary analysis of available literature and used the ecological approach to define a research hypothesis with focus on individual, family, and school variables related to early adolescents' urge to run away. This study also aimed to examine the influence of each of these variables in order to build a forecast model showing which variables have more influential on early adolescents' urge to run away. Methods: Materials were collected from 433 male and female fifth- and sixth-grade students at two schools in Gyeonggi Province. Analysis was carried out using SPSS/WIN 18.0. Frequency analysis, ${\chi}^2$-test, t-test, correlation analysis and logistic regression analysis were conducted. Results: The results indicate that personal factors related to runaway impulse are gender and previous runaway attempts, family-related factor family functionality, and school-related factor the area of stress from study. Conclusion: Based on the study results as above, individual, family, and school interventions need to be developed.

Breakdown Characteristics and Survival Probability of Turn-to- Turn Models for a HTS Transformer

  • Cheon H.G.;Baek S.M.;Seong K.C.;Kim H.J.;Kim S.H.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.7 no.2
    • /
    • pp.21-26
    • /
    • 2005
  • Breakdown characteristics and survival probability of turn-to-turn models were investigated under ac and impulse voltage at 77K. For experiments, two test electrode models were fabricated: One is point contact model and the other is surface contact model. Both are made of copper wrapped by O.025mm thick polyimide film(Kapton). The experimental results were analyzed statistically using Weibull distribution in order to examine the wrapping number effects on voltage-time characteristics under ac voltage as well as under impulse voltage in LN$_{2}$. Also survival analysis were performed according to the Kaplan-Meier method. The breakdown voltages of surface contact model are lower than that of point contact model, because the contact area of surface contact model is wider than that of point contact model. Besides, the shape parameter of point contact model is a little bit larger than that of surface contact model. The time to breakdown t$_{50}$ is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

A CMOS Impulse Radio Ultra-Wideband Receiver for Inner/Inter-chip Wireless Interconnection

  • Nguyen, Chi Nhan;Duong, Hoai Nghia;Dinh, Van Anh
    • Journal of IKEEE
    • /
    • v.17 no.2
    • /
    • pp.176-181
    • /
    • 2013
  • This paper presents a CMOS impulse radio ultra-wideband (IR-UWB) receiver implemented using IBM 0.13um CMOS technology for inner/inter-chip wireless interconnection. The IR-UWB receiver is based on the non-coherent architecture which removes the complexity of RF architecture (such as DLL or PLL) and reduces power consumption. The receiver consists of three blocks: a low noise amplifier (LNA) with active balun, a correlator, and a comparator. Simulation results show the die area of the IR-UWB receiver of 0.2mm2, a power gain (S21) of 12.5dB, a noise figure (NF) of 3.05dB, an input return loss (S11) of less than -16.5dB, a conversion gain of 18dB, a NFDSB of 22. The receiver exhibits a third order intercept point (IIP3) of -1.3dBm and consumes 22.9mW of power on the 1.4V power supply.

De-noising Method using Nonlinear Filter Algorithm in Mixed Noise Environments (복합잡음 환경에서 비선형 필터 알고리즘을 이용한 잡음제거 방법)

  • Long, Xu;Kim, Nam-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.9
    • /
    • pp.2265-2271
    • /
    • 2014
  • In modern society digital equipments that are related with various hardware and software are popularized, and digital images are widely applied in the field of production and scientific research. In general, however, images are degraded by the noise in the process of transmission and storage. In this paper, to reduce the influence of mixed noises, the algorithm in which noises in the space area are classified into impulse noise and Gaussian noise and this is processed by applying weighted value, while that is processed by modified nonlinear filter is proposed. And the excellence of the proposed algorithm is judged by PSNR(peak signal to noise ratio).

Changes in Real Exchange Rate and Business Fluctuations: A Comparative Study of Korea and Japan (실질환율변동의 경기변동효과: 한국과 일본의 비교연구)

  • Kwak, Tae Woon
    • International Area Studies Review
    • /
    • v.13 no.3
    • /
    • pp.309-330
    • /
    • 2009
  • This paper analyzes comparatively the effects of changes in real effective exchange rates on the business fluctuations of the cases of Korea and Japan employing structural vector auto-regression(S-VAR) model which uses quarterly data for the five variables of real effective exchange rates, GDP gap, real interest rates, oil prices, inflation rates for the period of 1980-2006. The paper employes impulse-response analysis and variance decompositions. The paper finds that real exchange rate depreciations are contractionay for the case of Korea while they are expansionary for the case of Japan. These results are consistent with the prevailing empirical results that real exchange rate depreciations are contractionary for developing countries while expansionary for advanced countries.

Adaptive threshold for discrete fourier transform-based channel estimation in generalized frequency division multiplexing system

  • Vincent Vincent;Effrina Yanti Hamid;Al Kautsar Permana
    • ETRI Journal
    • /
    • v.46 no.3
    • /
    • pp.392-403
    • /
    • 2024
  • Even though generalized frequency division multiplexing is an alternative waveform method expected to replace the orthogonal frequency division multiplexing in the future, its implementation must alleviate channel effects. Least-squares (LS), a low-complexity channel estimation technique, could be improved by using the discrete Fourier transform (DFT) without increasing complexity. Unlike the usage of the LS method, the DFT-based method requires the receiver to know the channel impulse response (CIR) length, which is unknown. This study introduces a simple, yet effective, CIR length estimator by utilizing LS estimation. As the cyclic prefix (CP) length is commonly set to be longer than the CIR length, it is possible to search through the first samples if CP is larger than a threshold set using the remaining samples. An adaptive scale is also designed to lower the error probability of the estimation, and a simple signal-to-interference-noise ratio estimation is also proposed by utilizing a sparse preamble to support the use of the scale. A software simulation is used to show the ability of the proposed system to estimate the CIR length. Due to shorter CIR length of rural area, the performance is slightly poorer compared to urban environment. Nevertheless, satisfactory performance is shown for both environments.

Impulse Noise Removal using Noise Density based Switching Mask Filter (잡음밀도 기반의 스위칭 마스크 필터를 사용한 임펄스 잡음 제거)

  • Cheon, Bong-Won;Kim, Nam-Ho
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2022.10a
    • /
    • pp.253-255
    • /
    • 2022
  • Thanks to the 4th industrial revolution and the development of various communication media, technologies such as artificial intelligence and automation are being grafted into industrial sites in various fields, and accordingly, the importance of data processing is increasing. Image noise removal is a pre-processing process for image processing, and is mainly used in fields requiring high-level image processing technology. Various studies have been conducted to remove noise, but various problems arise in the process of noise removal, such as image detail preservation, texture restoration, and noise removal in a special area. In this paper, we propose a switching mask filter based on the noise intensity to preserve the detailed image information during the impulse noise removal process. The proposed filter algorithm obtains the final output by switching to the extended mask when it is determined that the density is higher than the reference value when noise is determined in the area designated as the filtering mask. Simulation was conducted to evaluate the performance of the proposed algorithm, and the performance was analyzed compared to the existing method.

  • PDF