• 한국수자원학회논문집
• /
• 제43권6호
• /
• pp.571-581
• /
• 2010

본 연구에서는 복수의 충격응답함수를 유도하고 이를 이용하여 유역의 강우-유출 특성을 분석하였다. 복수의 충격응답함수를 유도하기 위해 경쟁적 충격응답함수라는 개념을 이용하였다. 이 개념에 따르면 각 충격응답함수는 관측된 유출의 모의에 선택되기 위해 서로 경쟁을 하게 된다. 이와 같은 경쟁적 충격응답의 개념은 정선, 영월, 영춘 및 충주댐 등 4개의 유역에 적용하였다. 각각의 유역에 대해 하나에서 세 개까지의 충격응답을 유도하고 아울러 유역의 특성을 고려하여 비교하였다. 먼저 하나의 충격응답을 유도하는 경우, 그 크기는 유역면적이 증가함에 따라 증가하는 것으로 나타났다. 두 개의 충격응답함수를 유도한 경우에서는 첫 번째 충격응답의 첨두값 및 두 번째 충격응답의 지속기간이 유역의 크기에 비례하여 증가하는 경향을 확인할 수 있었다. 세 개의 충격응답함수를 유도한 결과는 전체적으로 두개의 충격응답을 유도한 결과와 유사하게 나타났다. 그러나 세 번째 충격응답은 그 첨두값의 크기가 상당히 작고 아울러 지속기간이 매우긴 형태로 나타남을 파악하였다. 이상의 결과를 유역의 특성을 고려하여 종합해 보면, 첫 번째 충격응답은 직접유출과 밀접한 관련이 있으며, 두 번째 충격응답은 직접유출 및 중간유출의 특성을 함께 나타내고, 마지막으로 세 번째 충격응답은 중간유출 및 기저유출의 특성을 나타내는 것으로 보인다.

• 보건교육건강증진학회지
• /
• 제26권4호
• /
• pp.1-10
• /
• 2009

Objectives: The purpose of this study is to find the determinants of suicide impulse of residents living in mining region and other areas in one city. The past studies did not examine the suicide related attitudes or behaviors in mining region. This study also examines how coping resources and behaviors moderate the suicide impulse. Methods: For this purpose, hierarchical logistic regression method was used to predict the likelihood of suicide impulse. The personal characteristics, depression, coping resources and behaviors were considered as the independent variables. The data collected in this study was gathered through questionnaire survey with 502 residents in other areas as well as mining area in one city. Results and Conclusion: The results and conclusions are as follows: 1. The chi-square test revealed that residents living mining region showed higher percentage of suicide impulse compared to other areas. 2. The t-test revealed that those with suicide impulse had higher level of depression compared to those without it. This pattern was consistent in other areas as well as mining region. 3. The hierarchical logistic regression revealed that age, education, depression showed positive effect on suicide impulse in mining region. However, in other areas, education, illness, and depression showed positive effect on suicide impulse. Also, this result implies that suicide prevention efforts should be actively made in mining region.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.955-960
• /
• 2008

In this paper, an impulse of an industrial chop Saw is identified by experimental method and the impulse is reduced by structural modification. For the impulse identification, vibration signals are measured by an accelerometer when the chop saw is operating. From some experiments, it is found that the impulse occurs when there is slip between spindle and the wheelwasher and contact area is small between the wheelwasher and cutting discs. The design of the wheelwasher for optimization is performed by the FEM and experiments and the prototype is manufactured. It is verified that considerable amount of impulses are reduced by the structural modification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1633-1635
• /
• 1994

This paper presents the development technology of standard resistor divider for full lightning impulse voltage. The ability of high voltage bulk power equipment to withstand lighting stroke is usually evaluated by means of full lightning impulse voltage. Lightning impulse voltage test has been essential to evaluate the insulation performance of electrical power apparatus. Recently International standard (IEC 60) on high voltage measurement techniques is being revised and requests a formal traceability of high voltage measurements. Therefore, general interest for this area has grown considerably during last years, and several international intercomparisions have been completed already worldwide, i.e. Europe, Japan, America etc.. In this viewpoint, we have also investigated the standard resistor divider with shield, which satisfies the IEC recommendation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.470-487
• /
• 1996

The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.

• 대한안전경영과학회지
• /
• 제23권4호
• /
• pp.43-48
• /
• 2021

In this study, the experiment was conducted on a fire door(W × H = 0.98 m × 2.19 m) installed on the vestibule. The effective leakage area for each opening angles and closing forces derived from the impulse-momentum equation was compared and analyzed with the experimental results. As a result of the experiment, the major factors affecting the door closing forces were the pressure difference and the area of the door. The difference of door closing forces between measured and calculated values by the impulse-momentum equation showed a deviation of less than ±15% at the opening angles of 5°to 10°. At the door opening angle of 2.5°, the dynamic pressure was much higher than the measured static pressure, and this pressure difference is estimated to be air resistance acting to prevent the door from being completely closed.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.233-244
• /
• 2006

The purpose of this study is to examine the effects of situational involvement on impulse buying of clothing products in cable TV home shopping. Data were obtained from 235 women aged between 20 and 50 living in Seoul metropolitan area who have bought apparel products on impulse through cable TV. The data were analyzed using factor analysis, cluster analysis, MANOVA, and Chi-square analysis. By factor analysis, two factors of situational involvement factors were identified: Emotional Involvement and Cognitive Involvement. Based on situational involvement, consumers were classified into four groups; High Involvement, Low Involvement, Cognitive Involvement, and Emotional Involvement groups. These groups showed different decision making styles. The situational involvement groups were also different in terms of demographic characteristics, purchase behaviors, types of impulse purchase products, and responses to marketing stimuli. The findings of this study provide useful information for retails of Cable TV home shopping. Retailers may need to make useful marketing efforts for each types of situational involvement.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.79-84
• /
• 2015

Transformer is widely used element on power system and industrial area. Especially the transformers installed at power system are exposed to an environment of arbitrary changed. Thus the prediction of degradation and the analysis of response to impulse are important. To conduct those works, the electrical characteristics of system should be analyzed, effectively. But the analysis of electrical characteristic in electric machine level such as pole and pad-mounted transformer is almost no, thus commercial VNA (Vector Network Analyzer) is used to getting the response in wide frequency range. However, the output power of VNA is usually under 10mW, so verification for effectiveness of measuring electrically large component should be conducted, firstly. Next, after getting total S-parameter of transformer, predicting impulse response can be performed in time-domain with circuit simulator. In this paper, it is introduced that verification effectiveness of VNA using transfer function from SFRA (Sweep Frequency Response Analyzer), firstly. Next, total S-parameter, six by six matix form, was built using measured 2 port S-parameter from vector network analyzer. To get the response to impulse which is defined by IEC 60060-1, time-domain simulation is conducted to ADS (Advenced Design System) circuit simulator.

• 한국의류학회지
• /
• 제33권10호
• /
• pp.1519-1529
• /
• 2009

This study investigates the influences of the impulse buying tendency of consumers, apparel price and scarcity messages on purchasing behavior at the time of purchase on the internet. This study was comprised of 2 (impulse buying: high versus low) $\times$ 2 (price of Internet purchase products: high apparel price versus low apparel price) $\times$ 2 (scarcity message: quantity scarcity message versus time scarcity message) with three mixed elements. The subjects of this study were 400 college students in the Seoul and Gyeonggi area. A total of 95 students who had a high tendency for impulsive purchase and 104 who had a low tendency participated in the survey. Data are analyzed by factor analysis, T-test, and ANOVA. The results of this study are as follows. 1. At the time of group buying on the Internet, impulse buying tendency, apparel price, and scarcity message had a statistically significant interaction effect on consumer preferences. 2. At the time of purchase on the Internet, impulse buying tendency, apparel price, and scarcity message did not have a statistically significant interaction effect on the intention of consumers to make a purchase. However, there was a significant difference in the intention to make a purchase based on impulse buying tendency and apparel price.

• 한국소음진동공학회논문집
• /
• 제23권11호
• /
• pp.951-956
• /
• 2013

This paper describes techniques used to analyze the sweet spot of sound field reproduced by ear-level linear arrays of loudspeakers by geometrical approach method. Previous researches have introduced various sweet spot definitions in their own way. In general, sweet spot is defined as an area whose stereophonic sound effect is valid. Its size is affected by the geometrical arrangement of the system. In this paper, a case when plane waves are generated by linear arrays of loudspeakers in the horizontal plane is considered. So the sweet spot is defined as an area in which the listener can perceive the desired azimuth angle. Because there are many loudspeakers, impulse responses at listener's ears are in the form of pulse-train and the time-duration of the pulse-train affects the localization performance of the listener. So we calculated the maximum time duration of pulse-train by geometrical approach method and identified with the results of impulse response simulation. This paper also includes parameter analysis with respect to aperture size, so it suggests a tool for sound engineers to expect the sweet spot size and listener's sound perception.