• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1598-1611
• /
• 2016

In some special occasions with strict size requirements, such as mine hoists, improving the design accuracy of the forced-air cooling systems of NPC three-level inverters is a key technology for improving the power density and decreasing the volume. First, a fast power-loss calculation method was brought. Its calculation principle introduced in detail, and the computation formulas were deduced. Secondly, the average and dynamic power losses of a 1MW mine hoist acting as the research target were analyzed, and a forced-air cooling system model based on a series of theoretical analyses was designed with the average power loss as a heat source. The simulation analyses proves the accuracy and effectiveness of this cooling system during the unit lifting period. Finally, according to an analysis of the periodic working condition, the maximum power-loss range of a NPC three-level inverter under multi cycle operation was obtained and its dynamic power loss was taken into the optimized cooling system model as a heat source to solve the power device damage caused by instantaneous heat accumulation. The effectiveness and feasibility of the optimization design based on the dynamic power loss calculation of the maximum power-loss range was proved by simulation and experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1636-1643
• /
• 2001

Automobile maneuverability and tire durability are significantly influenced by the sidewall tire contour. In order to improve these tire performances, it is very important far one to determine a sidewall contour producing the ideal tension and strain-energy distributions. However, these requirements can nut be simultaneously achieved by conventional non-interactive multi-objective optimization methods based on mathematical programming, because these exhibit the conflicting behavior each other, with respect lo the sidewall contour. Therefore, we execute the tire contour optimization fur improving the maneuverability and the tire durability using satisficing trade-off method.

• Journal of the Korean Society of Safety
• /
• v.37 no.2
• /
• pp.43-53
• /
• 2022

This paper describes an attempt to improve and optimize the operational safety level of a domestic research reactor by conducting a probabilistic safety assessment (PSA) under full-power operating conditions. The PSA was undertaken to assess the level of safety at an operating research reactor in Korea, to evaluate whether it is probabilistically safe and reliable to operate, and to obtain insights regarding the requisite procedural and design improvements for achieving safer operation. The technical objectives were to use the PSA to identify the accident sequences leading to core damage, and to conduct sensitivity analyses based thereon to derive insights regarding potential design and procedural improvements. Based on the dominant accident sequences identified by the PSA, eight types of sensitivity analysis were performed, and relevant insights for achieving safer operation were derived. When these insights were applied to the reactor design and operating procedure, the risk was found to be reduced by approximately ten times, and the safety was significantly improved. The results demonstrate that the PSA methodology is very effective for improving reactor safety in the full-power operating phase. In particular, it is a highly suitable approach for identifying the deficiencies of a reactor operating at full power, and for improving the reactor safety by overcoming those deficiencies.

• Journal of Korea Multimedia Society
• /
• v.25 no.5
• /
• pp.730-738
• /
• 2022

Based on visual Thinking theory, VR(virtual reality) game changes the traditional form of memory and maps the content into game elements to realize the immersive spatial memory mode. This paper analyzes the influencing factors of game design and system function construction. This paper proposes a hypothesis: with the help of visual thinking theory, VR game is helpful to improve learners' visual memory, and carries out research. The experiment sets different levels of game through empirical research and case analysis of memory flip game. For example, when judging two random cards. If the pictures are the same, it will be judged as the correct combination; if they are different, the two cards will be restored to the original state. The results are analyzed by descriptive statistical analysis and AMOS data analysis. The results show that game content using the concept of "Memory Palace", which can improve the accuracy of memory. We conclude that the use of spatial localization characteristics in flip games combining visual thinking can improve users' memory by helping users memorize and organize information in a Virtual environment, which means VR games have strong feasibility and effectiveness in improving memory.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.161-166
• /
• 2003

In order to improve the fatigue lift of a lower control arm in the vehicle suspension, a new shape optimization procedure is presented. In this approach, the shape control point concept is introduced to reduce the numbers of shape design variables. Also, the two-level orthogonal way is employed to evaluate the design sensitivity of fatigue life with respect to those shape design variables, because the analytical design sensitivity information is not directly supplied from the commercial CAE softwares. In this approach, only the six design variables are used to approximate the shape of lower control arm. Then, performed are only 10 fatigue life analyses including the baseline design, 8 DOE models and the final design. The final design, the best combination obtained from the sensitivity information, can maximize the fatigue lift nearly two times as that of the baseline design, while reducing the 12 percentage of weight than it.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.655-658
• /
• 1997

In this paper, we intend to develop optimized design algorithm by deciding design parameters which are considered in the first design stage of inkjet printer head. thus, the parameters are such as electric pulse, input voltage of actuator to operate actuator, shape dimension of actuator an so on. in the first design stage, according to such parameters, a lot of time and money to develop inkject printer head are needed. to reduce trial and error and to save development time in the first design stage, optimized design algorithm is required all the more. design algorithm was developed via commercial FE analysis code(ANSYS & COENTOR) for the readability and convenience of algorithm. the reasonability of algorithm was verified by implementing analysis of system stage based on the data of piezoelectric actuator which was designed through algorithm.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1846-1851
• /
• 2003

Approximate optimization has become popular in engineering field such as MDO and Crash analysis which is time consuming. To accomplish efficient approximate optimization, accuracy of approximate model is very important. As surrogate model, Kriging have been widely used approximating highly nonlinear system . Because Kriging employs interpolation method, it is adequate for deterministic computer simulation. Because there are no random errors and measurement errors in deterministic computer simulation, instead of classical DOE ,space filling experiment design which fills uniformly design space should be applied. In this work, various space filling designs such as maximin distance design, maximum entropy design are reviewed. And new design improving maximum entropy design is suggested and compared.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.87-96
• /
• 1993

In this study, the peak stress of a fuillet in elastic structure was optimized to have minimum value by using quadratic isoparametric element. The method of auomatic gridding was also developed along with shape algorithm and design element technique was adopted in selecting design variables. The computer program developed was combined with the Hooke-Jeeves direct algorithm of optimization techniques in order to minimize the peak stress of the fillet. The imployment of design element technique significantly cut down computer time by the reduction in design variables, and the opitmum fillet shape with uniform minimum stress was obtained by varying design variables along x and y directions in improving the shape compared to other results. By using automatic gridding, in which Bezier surfaces and Coons surfaces of cubic interpolation were employed, the irregular boundary was removed resulting in smoother anbd more accurate fillet shape possessing uniform minimum stress.

• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.157-164
• /
• 2020

Considering the frustration affordability level of college entrants and investigating the frustration tolerance of undergraduates in Shenyang City University, this paper provides the basis for the research of improving frustration tolerance of undergraduates through quantitative research results and applies film therapy to the frustration regulation of college students by discussing the role of film therapy in improving frustration affordability ability of college entrants. This paper has concluded that the necessary of improving the frustration tolerance of college students in Northeast China and the feasibility of the film therapy programs on improving the frustration tolerance of college students in Northeast China. Meanwhile, this paper shows that the principle of film selection in film therapy should be based on the requirements of the aesthetics of the film industry in the IT environment. This paper provides a reference for refining the target of film therapy for film therapists to better apply film and television psychotherapy technology, and a basis for the film therapy activity program; Furthermore, it also has a certain reference significance for film and television media workers.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.4
• /
• pp.23-31
• /
• 2023

Purpose: Gas firms often fall victim to disregarding the importance of sensitivity, thus leading to many unprecedented repercussions. To ensure that gas firms fully contribute to sustainability and ethical standards, environmental Social Governance (ESG) has been identified as the ideal framework. This study aims to investigate the impact of ESG management for improving gas firm performance. Research design, data and methodology: The prior qualitative literature analysis was to figure out adequate past research for the topic based on the major portal web databased, such as 'Google Scholar' and 'Scopus' to make sure resources' credibility. Results: Gas firms are among the pertinent organizations vis-à-vis environmental destruction issues. Gas firms emit dangerous gases such as ethane, carbon dioxide and methane that are dangerous for the people and the environment. Thus, many pro-environmental conservation stakeholders have had rallying calls for such gas firms to mitigate environmental pollution intentionally. Conclusions: This study may be used to human resources in improving employee results elsewhere. Besides, it can be of the essence in improving the relationship between such firms and society. Therefore, the study findings are of greater significance and implications to multiple parties, users and stakeholders regarding the research topic and beyond the current scope of the study.