• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.11-19
• /
• 2018

This study was conducted to develop the manufacturing method of biochar using pruned stems of pear tree and its application effect on the crop growth and soil physico-chemical properties. In this study, biochar derived from pruned stems of pear tree at heating temperature of $300^{\circ}C$, $500^{\circ}C$ and $700^{\circ}C$ in heating times of 2, 3 and 4 hours, were tested in the changes of their chemical properties during biochar processing. The pH, Exch. K, Exch. Mg and cation exchange capacity (CEC) increased as the pyrolysis temperature increased during the production of biochar, and the change of these properties rapidly occurred at $500^{\circ}C$. However, as the pyrolysis temperature increased, ash content increased and total carbon (T-C), yield decreased. And the change of the properties in response to the heating time was not shown. It was thought that it would be desirable to set the production conditions of biochar at $500^{\circ}C$ for 2 hours in consideration of the change of chemical properties and the ash content and yield. And also, were conducted the experiments to establish manufacturing method of farm-made biochar using drum biochar manufacturing machine and investigate the application effects of biochar on the cultivation of chinese cabbage and tomato. Application of biochar derived from pruned stems of pear tree could enhance pH, organic matter (OM), total carbon (T-C) of soil. On the other hand, soil electrical conductivity (EC), NO3-N were lowered compared to the control which has no application. The bulk density, porosity and aggregate formation of soil were improved by biochar application. The fresh matter yields of chinese cabbage and tomato were significantly increased in proportion to the application rate of biochar. This study demonstrated the effect of the biochar derived from agricultural byproduct to be as a low cost potential soil ameliorant by physico-chemical properties in eco-friendly greenhouse cultivation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.3
• /
• pp.149-155
• /
• 2021

Early warning systems for weather risk management in the agricultural sector have been developed to predict potential wind damage to crops. These systems take into account the daily maximum wind speed to determine the critical wind speed that causes fruit drops and provide the weather risk information to farmers. In an effort to increase the accuracy of wind risk predictions, an artificial neural network for binary classification was implemented. In the present study, the daily wind speed and other weather data, which were measured at weather stations at sites of interest in Jeollabuk-do and Jeollanam-do as well as Gyeongsangbuk- do and part of Gyeongsangnam- do provinces in 2019, were used for training the neural network. These weather stations include 210 synoptic and automated weather stations operated by the Korean Meteorological Administration (KMA). The wind speed data collected at the same locations between January 1 and December 12, 2020 were used to validate the neural network model. The data collected from December 13, 2020 to February 18, 2021 were used to evaluate the wind risk prediction performance before and after the use of the artificial neural network. The critical wind speed of damage risk was determined to be 11 m/s, which is the wind speed reported to cause fruit drops and damages. Furthermore, the maximum wind speeds were expressed using Weibull distribution probability density function for warning of wind damage. It was found that the accuracy of wind damage risk prediction was improved from 65.36% to 93.62% after re-classification using the artificial neural network. Nevertheless, the error rate also increased from 13.46% to 37.64%, as well. It is likely that the machine learning approach used in the present study would benefit case studies where no prediction by risk warning systems becomes a relatively serious issue.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.3
• /
• pp.229-236
• /
• 2020

Purpose: This study examined the utility of preliminary magnetic resonance imaging (MRI) measurements in the ultrasound-guided L4 selective nerve root block. Materials and Methods: As a retrospective study, 71 patients, who met the criteria for outpatient visits from March 2016 to December 2017, were included. From March 2016 to February 2017, 31 patients who underwent an L4 nerve root block without MRI were classified as group A, and 40 patients who underwent an L4 nerve root block through MRI measurements from March 2017 to December 2017 were classified as group B. Group A was injected under ultrasound-guidance through the pararadicular approach without a pre-interventional MRI evaluation, and group B was injected under ultrasound-guidance according to the preliminary MRI measurements. The results were assessed using the numeric rating scale scores before, three hours, and two, six, and 12 weeks after the procedure. Results: At three hours after the procedure, the proportion of patients better than good results were 51.6% in group A and 67.5% in group B. At two weeks after the procedure, the proportion of patients with better than good results were 48.4% and 70.0% in groups A and B, respectively; 58.1% and 62.5% of patient of groups A and B, respectively, showed better than good results after six weeks. In 12 weeks after the procedure, the results of group A and B were 67.7% and 62.5%, respectively. At three hours and two weeks after the procedure, group B showed significant symptom improvement than group A (p<0.05). The procedures were repeated 2.8 and 1.7 times in groups A and B, respectively, between two and six weeks for satisfactory pain relief (p<0.05). Conclusion: A pre-interventional MRI evaluation might improve pain relief within the initial two weeks after ultrasound-guided L4 selective nerve root block by improving the success rate of the procedure.

• Journal of Nutrition and Health
• /
• v.55 no.2
• /
• pp.296-308
• /
• 2022

Purpose: To investigate the effect of a mother's modeling and feeding practices on the eating behavior of the children. Methods: From April to June 2018, 1,036 young children aged 2 to 6 years and their mothers in Gyeongsan, Gyeongsangbuk-do, were examined for their eating behavior and feeding practices using a verified dietary behavior test (DBT). The children's dietary behavior was classified into four categories: "access evasiveness", "sensory acuity", "hyperactivity", and "irregularity". The mother's eating behavior was classified into three categories: "pickiness", "negligence", and "irregularity", and feeding practice types were classified into two categories: "responsibility/monitoring", and "restriction/pressure". The differences between the groups were tested using the t-test, ANOVA, and Duncan's multiple range test. The influence of feeding practices on the children's eating behavior was analyzed by hierarchical regression analysis while controlling for the mother's modeling. Results: The problem rates of irregularity, negligence and pickiness in the mother's modeling were 33.7%, 22.8%, and 20.7%, respectively. An analysis of the mother's feeding practices revealed that responsibility/monitoring had a middle, high and low significance in 74.2%, 17.3%, and 8.5% of respondents, respectively and the risk rate of restriction/pressure when guiding children to eat was 15.3%. The problem rates for sensory acuity, access evasiveness, irregularity, and hyperactivity in children were 27.9%, 26.1%, 24.8%, and 22.0%, respectively. Among the four eating behavior characteristics of children, the child's access evasiveness and sensory acuity were more affected by their pickiness rather than the mother's feeding practices, and the child's hyperactivity was more influenced by feeding practices than the mother's eating behavior. The child's irregularity was similarly affected by the mother's eating behavior and feeding practices. Conclusion: Since the mother's eating behavior and feeding practices affect the children's eating behavior, a diet improvement program for children should consider not only the nutrition education of children but also the mother's eating behavior and provide the necessary intervention for feeding practices.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.2
• /
• pp.135-152
• /
• 2021

The purpose of this study was to examine the effectiveness of the curriculum implementation of 「Food Safety and Health」, a Home Economics elective course, for high school students. Accordingly, several units of the 「Food Safety and Health」curriculum were piloted in six high schools in Chungbuk, Gyeonggi, Daejeon, and Sejong, and 1,199 questionnaires collected from students who participated in the classes were analyzed. The results are as follows. The 「Food Safety and Health」class had a significant effect on improving the total score of 'food safety and health' knowledge of high school students and scores for sub-dimensional area. Compared to the pre-test, the overall rate of correct answers for the post-test has increased by 7.99%p, and schools that implemented the relevant unit class relatively more had higher improvement scores. In addition, the 「Food Safety and Health」class has positively changed the eating behavior of high school students, and had a significant effect on having a habit of eating a variety of foods evenly. High school students who participated in the 「Food Safety and Health」class evaluated their classes very positively (4.27 out of 5 points), and responded that the content of the class was interesting, easy to understand, and helpful for their diet in daily life. According to the responses to the open-ended questions, students responded that the class was helpful in acquiring food-related knowledge in their real lives, while there were so many limitations for experiencing lab class and group activities due to COVID 19. In preparation for the high school credit system, this study is meaningful that it has expanded the elective courses in home economics area, as well as the right to choose subjects for high school students.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.143-153
• /
• 2020

Purpose: To evaluate the timing of the improvement in surgical skills of the direct anterior approach for hip arthroplasty through an analysis of the clinical features and learning curve in 58 cases. Materials and Methods: From November 2016 to November 2018, 58 patients, who were divided into an early half and late half, and underwent hip arthroplasty by the direct anterior approach, were enrolled in this retrospective study. The operation time and complications (fracture, lateral femoral cutaneous nerve injury, heterotopic ossification, infection, and dislocation) were assessed using a chi-square test, paired t-test, and cumulative sum (CUSUM) test. Results: The mean operation times in total hip arthroplasty (26 cases) and bipolar hemi-arthroplasty were 132.1 minutes and 79.7 minutes, respectively, demonstrating a significant difference between the two groups. CUSUM analysis based on the results revealed breakthrough points of the operation time, decreasing to less than the mean operation time because of the 16th case in total hip arthroplasty and 14th case in bipolar hemiarthroplasty. Complications were encountered in the early phase and late phase: five cases of fractures in the early phase, no case in the late phase; eight and two cases of lateral femoral cutaneous nerve injury, respectively; three and two cases of heterotopic ossification, respectively; and one case of dislocation, one case of infection and three cases of others in the early phase. The CUSUM chart for the fracture rate during operation in the early phase revealed the following: five cases fracture (17.2%) in the early phase and no case in the late phase (0%). This highlights the learning curve and the need for monitoring the inadequacy of operation based on the complications. Conclusion: Hip arthroplasty performed by the direct anterior approach based on an anatomical understanding makes it difficult to observe the surgical field and requires a learning curve of at least 30 cases.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.85-103
• /
• 2023

The in-situ remediation of a solidified stratum containing a large amount of fine-texture material like clay or organic matter in contaminated soil faces limitations such as increased remediation cost resulting from decreased purification efficiency. Even if the soil conditions are good, remediation generally requires a long time to complete because of non-uniform soil properties and low permeability. This study assessed the remediation effect and evaluated the field applicability of a methodology that combines pneumatic fracturing, vacuum extraction, and plasma blasting (the PPV method) to improve the limitations facing existing underground remediation methods. For comparison, underground remediation was performed over 80 days using the experimental PPV method and chemical oxidation (the control method). The control group showed no decrease in the degree of contamination due to the poor delivery of the soil remediation agent, whereas the PPV method clearly reduced the degree of contamination during the remediation period. Remediation effect, as assessed by the reduction of the highest TPH (Total Petroleum Hydrocarbons) concentration by distance from the injection well, was uncleared in the control group, whereas the PPV method showed a remediation effect of 62.6% within a 1 m radius of the injection well radius, 90.1% within 1.1~2.0 m, and 92.1% within 2.1~3.0 m. When evaluating the remediation efficiency by considering the average rate of TPH concentration reduction by distance from the injection well, the control group was not clear; in contrast, the PPV method showed 53.6% remediation effect within 1 m of the injection well, 82.4% within 1.1~2.0 m, and 68.7% within 2.1~3.0 m. Both ways of considering purification efficiency (based on changes in TPH maximum and average contamination concentration) found the PPV method to increase the remediation effect by 149.0~184.8% compared with the control group; its average increase in remediation effect was ~167%. The time taken to reduce contamination by 80% of the initial concentration was evaluated by deriving a correlation equation through analysis of the TPH concentration: the PPV method could reduce the purification time by 184.4% compared with chemical oxidation. However, the present evaluation of a single site cannot be equally applied to all strata, so additional research is necessary to explore more clearly the proposed method's effect.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.605-614
• /
• 2022

Two major problems currently threaten human survival on Earth: climate change and the rapid aging of the population in developed countries. Climate change is a result of the increase in greenhouse gas (GHG) concentrations in the atmosphere due to the increase in the use of fossil fuels owing to economic and transportation development. The rapid increase in the age of the population is a result of the rise in life expectancy due to the development of biomedical science and technology and the improvement of personal hygiene in developed countries. To avoid irreversible global climate change, it is necessary to quickly transition from the current fossil fuel-based economy to a zero-carbon renewable energy-based economy that does not emit GHGs. To achieve this goal, the dairy and livestock industry, which generates the most GHGs in the agricultural sector, must transition to using low-carbon emission production methods while simultaneously increasing consumers' preference for low-carbon diets. Although 77% of currently available arable land globally is used to produce livestock feed, only 37% and 18% of the proteins and calories that humans consume come from dairy and livestock farming and industry. Therefore, using edible insects as a protein source represents a good alternative, as it generates less GHG and reduces water consumption and breeding space while ensuring a higher feed conversion rate than that of livestock. Additionally, utilizing the functionality of medicinal insects, such as silkworms, which have been proven to have certain health enhancement effects, it is possible to develop functional foods that can prevent or delay the onset of currently incurable degenerative diseases that occur more frequently in the elderly. Insects are among the first animals to have appeared on Earth, and regardless of whether humans survive, they will continue to adapt, evolve, and thrive. Therefore, the use of various edible and medicinal insects, including silkworms, in industry will provide an important foundation for human survival and prosperity on Earth in the near future by resolving the current two major problems.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.110-118
• /
• 2002

This study was conducted to investigate the physiology of optimal reproductive age in Hanwoo for protection to decrease of reproductivity and improvement of production of offspring. Thirty two cows were devided into 4 groups of treatments : T1(12 months of age and 0.5kg daily gain), T2(12 months of age and 0.8kg daily gain), T3(15 months of age and 0.5kg daily gain) and T4(18 months of age and 0.5kg daily gain). The days of the first heat of treated cows were 263.3±6.4 days and average weight was 181.1±11.3kg. The conception rates of first insemination were 25%(T1) and 75%(T4), and the number of insemination of T3 and T4(both 1.5) was lower than those of T1 and T2(2.3 and 2.4), respectively. With regard to estrus return after the first parturition, T1, T2, T3 and T4 showed 66.2,76.7, 62.4 and 68.5 days, respectively, indicating the average days of estrus return was 65.7. Plasma progesterone(P4) concentration was nearly the same during the observation periods of treated cows and P4 began to be detected after 12months. Only 5(15.6%) out of 32cows showed normal estrus cycle and ovulation before 12 months. During the peri-parturition period, P4 concentration was rapidly decreased and there was no detection of P4 from parturition to 40 days after milking. P4 would be released again on 45 day after parturition. The results imply that the optimal reproductive age of Hanwoo heifers would be around at the 14 months of age, 110cm height and 265kg weight.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.