• 제목/요약/키워드: Improvement of water quality

Search Result 1,149, Processing Time 0.031 seconds

Effects of Azolla Incorporation During Paddy Cultivation on Weed Control, Nitrogen Supply and Rice Yield (물개구리밥(Azolla)이 논 잡초 발생, 질소공급 및 쌀 수량에 미치는 영향)

  • Shin, Jong-Hee;Han, Chae-Min;Kwon, Jung-Bae;Won, Jong-Gun
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.66 no.4
    • /
    • pp.271-278
    • /
    • 2021
  • Azolla is a genus of small aquatic ferns native to Asia, Africa, and America. Azolla is potentially significant as a nitrogen source in agriculture, particularly in conjunction with rice (Oryza sativa L.) cultivation. In addition, Azolla may either control weeds or act as a weed depending on management; therefore, we aimed to determine the effect of Azolla incorporation on weed (e.g., Monochoria vaginalis, Rotala indica, Aeschynomene indica, and Cyperus amuricus) control and its other benefits during rice cultivation. The effects of Azolla on weed emergence were evaluated based on plot area coverage by the Azolla mat, which appears as a green sheet over water, and the rate of weed emergence in paddy field. Weed occurrence was investigated 40 days after Azolla inoculation. Soil samples from the experimental plots were collected following harvest in 2014-2015, and analyzed. Moreover, rice growth, yield, and grain quality were measured. Azolla suppressed weed growth by 72%. Azolla mat incorporation in rice fields suppressed weed growth by over 60%. In addition, Azolla promoted nitrogen fixation. Compared with nitrogen management using chemical fertilizers, Azolla incorporation showed the potential for various positive effects, including the improvement of soil fertility by increasing total nitrogen, and organic matter content. Rice grown with Azolla maintained its yield without additional herbicide treatment. Moreover, the palatability of cooked rice was better when grown with Azolla.

Effect of dietary supplement with fermentation feed on the physicochemical properties of pork (발효 사료 첨가가 돼지고기의 이화학적 특성에 미치는 영향)

  • Park, W.J.;Sung, C.K.;Kim, G.J.
    • Korean Journal of Agricultural Science
    • /
    • v.24 no.1
    • /
    • pp.41-49
    • /
    • 1997
  • The results on the chemical characteristics of the pork fed with fermented feeds are summarized as follows; 1) The pork treated with fermented feeds had lower fat and higher protein content than control pork in proximate compositions. It is considered to be the improvement of the quality. 2) It was not recognized to the difference of oxidation level among the sample porks. 3) Oleic acid was the highest concentration in the components of fatty acid of pork. The rate of the saturated and unsaturated fatty acids is 38.8 % : 59.9 % in the ordinary meat, 40.8 % : 57.8 % in the a high-grade meat, and 36.3 % : 62.0 % in the pork treated with fermented feeds. In addition, the essential fatty acid content of them is 14 %, 11.2 %, and 16.7%, respectively. 4) Glutamic acid was the highest composition in total amino acids and the essential amino acid content was 39% in both an ordinary meat and the pork treated with fermented feeds, and 14 % in high-grade meat. 5) It was no difference in the inorganic content among the samples. The water holding capacity by extraction meat juice was higher to 92 % in the pork treated with fermented feeds and 15.6 % in a loss in quantity by heating than others. Thus, the pork bred with fermented feeds was evaluated to be good in terms of processing and cooking.

  • PDF

Evaluation on HACCP prerequisite-program performance within general hospital foodservice operations (종합병원 급식소의 HACCP 선행요건 관리 수행도 평가)

  • Song, Yoon-Ji;Bae, Hyun-Joo
    • Journal of Nutrition and Health
    • /
    • v.49 no.1
    • /
    • pp.43-50
    • /
    • 2016
  • Purpose: This study was conducted to examine prerequisite-program performance of the hospital foodservice operation and develop measures for improvement of prerequisite-program performance. Methods: Data were collected through surveys administered to 168 hospital dieticians in the Seoul, Incheon, Gyeonggi-do, Daegu, and North Gyeongsang areas. Out of total questionnaires, 65 questionnaires were usable and the response rate was 38.7%. Statistical analyses were performed using the SPSS program (ver 20.0) for ${\chi}^2-test$ and one-way ANOVA. Results: According to the result of the prerequisite-program evaluation, the percentage of 'appropriate', 'needs to be improved', and 'inappropriate' was 44.6%, 47.7%, and 7.7%, respectively. The score for the 'inappropriate' group was significantly lower than that of the 'appropriate' group or 'needs to be improved' group on the food safety management (p < 0.001), preparation facility management (p < 0.001), water management (p < 0.001), and storage transportation management (p < 0.05) parts. Holding rate of foodservice facility and equipments in the 'appropriate' group were significantly higher than in the others on convection oven (p < 0.01), air conditioner (p < 0.01), three-compartment sink (p < 0.01), hot-holding equipment (p < 0.01), cold-holding equipment (p < 0.05), exclusive thawing refrigerator (p < 0.05), and sterilizer for sanitary shoes (p < 0.05) items. Conclusion: To improve the quality of hospital foodservice, foodservice managers and HACCP specialists should develop and implement a prerequisite-program and a HACCP plan considering the characteristics of the hospital foodservice operation.

Improvement of Storaging Ability of Waxycorn by Retort Pouch Technique (레토르트 파우치 방법에 의한 찰옥수수의 저장성 향상)

  • Heo Nam-Kee;Kim Keyung-Dea;Choi Byoung-Gon;Kim Keyung-Hee;Min Hwang-Kee;Kwon Heuy-Jeong
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.50 no.spc1
    • /
    • pp.147-151
    • /
    • 2005
  • Retort pouch is widely used in food industry for a long-term preservation and safe food production. By applying retort pouch technique to waxycorn storage, the quality of waxycorn could be maintained and the storage expense could be saved during storage. Water activities(Aw) of retort waxycorn were below 0.80 except blanching treatment, and it is known that microbial propagation is subdued below 0.80. Commercial value of waxy corn was deteriorated when it was frozen quickly at $-40^{\circ}C$ before treating Retort due to obscurity of chromatocity, while the color change was not noticeable when it was treated with Retort at $121^{\circ}C$ for 10min. For all treatments, very small amounts of free sugar were detected, however, there were no significant differences between treatments. As storage period was longer, shelf lifes of waxy corn in control and waxy corn treated with blanching were more shortened when waxy corn was stored at $15,5^{\circ}C$ before Retort, while waxy corn with boiling treatment was not significantly different compared with that in storage in freezer.

Study on Improvement of Tungsten Alloy Granular Powder in Defense Industry (방산 분야 텅스텐 합금 과립분말 개선 연구)

  • Ji, Sangyong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.10
    • /
    • pp.206-211
    • /
    • 2020
  • Tungsten alloys are used widely in general industrial fields, but they are difficult to cast, so products are manufactured using powder metallurgy. In this study, a mixed powder of tungsten, nickel, and iron homogenized using a ball mill was added to pure water as a solvent, and PVA as a binder was added to prepare a spray drying mixture. The mixed liquid was prepared using a spraying machine. A study was carried out to produce a granular powder that can reduce the variations between products during the molding and sintering process of the powder metallurgy method. A preliminary experiment was conducted to confirm the influence of the variables in the granulation process. Through the preliminary test results, this experiment was performed with the volume of solvent of the spray drying the mixture as an independent variable, and granular powder having a mean particle size similar to that of the existing mass-production conditions and an increased apparent density was prepared. In addition, a pilot test was conducted for the molding and sintering process. The improved granular powder reduced the characteristic variation (weight variation) of the mass-produced product.

Removal of Nitrogen and Phosphorus by Salix gracilistyla Miq. (갯버들(Salix gracilistyla Miq.)의 질소와 인 제거능)

  • 신정이;차영일
    • Korean Journal of Environmental Biology
    • /
    • v.17 no.4
    • /
    • pp.449-457
    • /
    • 1999
  • Removal efficiency and potential of N and P by Salix gracilistyla Miq. are determined in continuous flow tanks as a function of hydraulic retention time (HRT, days) and nutrient concentration (NC). Results show that the removal efficiency was longer HRT and lower nutrient solution. And also removal potential was higher at shorter HRT and higher nutrient concentration, and the regression equations were estimated. Mean above ground biomass of Salix gracilistyla Miq. in the middle reaches of Suip stream was 4880.81 g/$m^2$, and estimated removal by this vegetation from biomass and estimated equation above were 0.49~15.49 NH$_4$-N kg/day, 5.83~405.39 NO$_3$-N kg/day, 7.57~23.22 PO$_4$-P kg/day in Suip stream, respectively when HRT was 0.59~5.21, inflow concentration was 0.05~0.4, mg/L NH$_4$-N, 1.42~11.36 mg/L NO$_3$-N, 0.1~0.27 mg/L PO$_4$-P. According to this study, it is concluded that Salix gracilistyla Miq. are contribute by their high biomass and for water quality improvement of stream through nutrient removal potential.

  • PDF

Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011 (설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰)

  • Han, Hwa-Taik;Lee, Dae-Young;Kim, Seo-Young;Choi, Jong-Min;Paik, Yong-Kyoo;Kim, Su-Min
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.24 no.6
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

Research on The Implementation of Smart Factories through Bottleneck improvement on extrusion production sites using NFC (NFC를 활용한 압출생산현장의 Bottleneck 개선을 통한 스마트팩토리 구현 연구)

  • Lim, Dong-Jin;Kwon, Kyu-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.2
    • /
    • pp.104-112
    • /
    • 2021
  • For extrusion processes in the process industry, the need to build smart factories is increasing. However, in most extrusion production sites, the production method is continuous, and because the properties of the data are undeed, it is difficult to process the data. In order to solve this problem, we present a methodology utilizing a near field communication (NFC) sensor rather than water-based data entry. To this end, a wireless network environment was built, and a data management method was designed. A non-contact NFC method was studied for the production performance-data input method, and an analysis method was implemented using the pivot function of the Excel program. As a result, data input using NFC was automated, obtaining a quantitative effect from reducing the operator's data processing time. In addition, using the input data, we present a case where a bottleneck is improved due to quality problems.

Cultural Practices for Reducing Cold Wind Damage of Rice Plant in Eastern Coastal Area of Korea (동해안지대 도작의 냉조풍피해와 피해경감대책)

  • 이승필;김칠용
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.5
    • /
    • pp.407-428
    • /
    • 1991
  • The eastern coastal area having variability of climate is located within Taebaek mountain range and the east coast of Korea. It is therefore ease to cause the wind damages in paddy field during rice growing season. The wind damages to rice plant in this area were mainly caused by the Fohn wind (dry and hot wind) blowing over the Taebaek mountain range and the cold humid wind from the coast. The dry wind cause such as the white head, broken leaves, cut-leaves, dried leaves, shattering of grain, glume discolouration and lodging, On the other hand the cold humid wind derived from Ootsuku air mass in summer cause such symptom as the poor rice growth, degeneration of rachis brenches and poor ripening. To minimize the wind damages and utilize as a preparatory data for wind injury of rice in future, several experiments such as the selection of wind resistant variety to wind damage, determination of optimum transplanting date, improvement of fertilizer application methods, improvement of soils and effect of wind break net were carried out for 8 years from 1982 to 1989 in the eastern coastal area. The results obtained are summarized as follows. 1. According to available statisical data from Korean meteorological services (1954-1989) it is apperent that cold humid winds frequently cause damage to rice fields from August 10th to September 10th, it is therefore advisable to plan rice cultivation in such a way that the heading date should not be later than August 10th. 2. During the rice production season, two winds cause severe damage to the rice fields in eastern coastal area of Korea. One is the Fohn winds blowing over the Taebaek mountain range and the other is the cold humid wind form the coast. The frequency of occurrence of each wind was 25%. 3. To avoid damage caused by typhoon winds three different varieties of rice were planted at various areas. 4. In the eastern coastal area of Korea, the optimum ripening temperature for rice was about 22.2$^{\circ}C$ and the optimum heading date wad August 10th. The optimum transplanting time for the earily maturity variety was June 10th., medium maturity variety was May 20th and that of late maturity was May 10th by means of growing days degree (GDD) from transplanting date to heading date. 5.38% of this coastal area is sandy loamy soil while 28% is high humus soil. These soil types are very poor for rice cultivation. In this coastal area, the water table is high, the drainage is poor and the water temperature is low. The low water temperature makes it difficult for urea to dissolve, as a result rice growth was delayed, and the rice plant became sterile. But over application of urea resulted in blast disease in rice plants. It is therefore advise that Ammonium sulphate is used in this area instead of urea. 6. The low temperature of the soil inhibits activities of microorganism for phosphorus utilization so the rice plant could not easily absorb the phosphorus in the soil. Therefore phosphorus should be applied in splits from transplanting to panicle initiation rather than based application. 7. Wind damage was severe in the sandy loamy soil as compared to clay soils. With the application of silicate. compost and soil from mointain area. the sand loamy soil was improved for rice grain colour and ripening. 8. The use of wind break nets created a mocro-climate such as increased air. soil and water temperature as well as the reduction of wind velocity by 30%. This hastened rice growth, reduced white head and glume discolouration. improved rice quality and increased yield. 9. Two meter high wind break net was used around the rice experimental fields and the top of it. The material was polyethylene sheets. The optimum spacing was 0.5Cm x 0.5Cm. and that of setting up the wind break net was before panicle initiation. With this set up, the field was avoided off th cold humid wind and the Fohn. The yield in the treatment was 20% higher than the control. 10. After typhoon, paddy field was irrigated deeply and water was sprayed to reduce white head, glume discolouration, so rice yield was increased because of increasing ripening ratio and 1, 000 grain weight.

  • PDF

A Study on the Improvement of User Value through the Analysis of the Status of Smart Home Service in Korea Based on the Internet of Things (사물인터넷 기반 국내 스마트 홈서비스 현황 및 사용 후기 분석을 통한 사용자 가치 제고방안에 관한 연구)

  • Yoon, Seong-Jeong;Kim, Min-Yong
    • Management & Information Systems Review
    • /
    • v.36 no.5
    • /
    • pp.45-60
    • /
    • 2017
  • This study aims to elucidate the key improvements through the current state of customer support for smart home services based on the Internet of things and the evaluation of user's usage. Smart home services typically provide a wide range of value in terms of security, safety, manageability (electricity and water use), convenience, and remote management accessibility. In this study, we analyzed the current state of smart home service based on Internet of Samsung, SKT and LG U + companies in Korea. However, since LG U+ is the only company providing user reviews, there is a limit to generalization, but we are trying to figure out whether the customer value is conveyed properly or not, and in which part the customer support is focused to support the service. As a result of analyzing the results of the study, we found that the smart home service is commercialized and marketed in various forms. However, it is questionable whether the technological level and user satisfaction level are sufficiently satisfied. The results of this study are as follows. First, although each company provides usage guidance, they still ask many questions about joining products and using products. Second, there are many defects in the product itself, and it is found that the companies are not satisfied with the overall response. Third, the three companies are focusing on switches, outlets, sensors, and lamps. This is an individual intelligent product rather than an interlocking or linking level, and it can be seen that there are many parts that are not compatible with the concept of the original Internet of things. In conclusion, this study shows that there are still many areas to improve on the level of customer service provision of smart home service, in particular, the ease of use is low and the quality of products is not reliable. We would like to present the improvement of this in detail through this study and reflect the companies that provide it and the service providers.