• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.83-86
• /
• 2002

This paper presents a new self-erasing discharge mode for the improvement of luminous efficiency and color purity of an AC plasma display panel (AC PDP). A new self-erasing discharge mode is produced between successive sustain pulses. by simultaneously applying the auxiliary short pulses at the falling edge of the sustain pulses without cross-talk during a sustain period. As a result. the luminous efficiency and color gamut are improved by 16% and 5%, respectively.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.77-85
• /
• 2007

With the increase in the demand for sustainable and environment-friendly development all over the world, it becomes an urgent issue for Korea to reduce $CO_2$ emission. Since building industry accounts for about 40% of international energy and resource consumption and $30{\sim}40%$ of $CO_2$ emission, it is essential to prepare for energy-efficient building. This study aims to seek for improvement direction for a domestic Building Energy Efficiency Rating System through the comparison with foreign systems. Two foreign building energy rating systems which have the similar application scope with domestic one, HERS(Home Energy Rating System) and SAP(Standard Assessment Procedure)2005 were selected. As compared with foreign systems, we intended to suggest improvement direction for effective application of Building Energy Efficiency Rating System in Korea.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.68-71
• /
• 2020

In this study, SiNx and Al₂O₃ thin film was manufactured using PECVD deposition process and applied to crystalline silicon solar cells, resulting in 16.7% conversion efficiency. The structural improvement experiment of the rear electrode resulted in a 1.7% improvement in conversion efficiency compared to the reference cell by reducing the recombination rate of minority carriers and increasing the carrier lifetime by forming a passivation layer consisting of SiNx and Al₂O₃ thin films through the PECVD process.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.392-399
• /
• 2009

This study investigates and analyzed electrical energy curtailment effect by each business department and by energy use efficiency elevation equipment because do an energy use plan that is enforced in each variety business that is developed in domestic by model. When plan the recent electrical energy use with this, I wish to contribute in energy use general planning establishment improvement that is aiming energy efficiency improvement newly by groping improvement plan moment deduce problem. Specially, search present condition and problem by electrical energy curtailment equipment application that probes mass and analyzed, and is applied in present our country according to analysis contents to the latest energy use plan that was enforced on energy use rationality narration but allowed purpose.

• 한국컴퓨터정보학회논문지
• /
• 제17권10호
• /
• pp.99-105
• /
• 2012

지그비는 저 전력, 저 비용, 낮은 데이터 전송 속도의 특징을 가지는 무선 개인 망(Low Rate Wireless Personal Area Networ: LR-WPAN)의 표준이다. 방향성 메시징 기법은 방송을 사용하는 무선 센서 네트워크에서 방향정보를 가지는 메시지를 특정 영역으로 전송함으로써 중복 메시지 전송을 줄이는 것을 통하여 에너지 효율성을 높이는 프로토콜이다. 본 논문에서는 에너지 효율성 향상을 위하여 방향성 메시징을 지원하도록 수정한 지그비를 사용하는 실험용 격자형 센서 네트워크를 설계하고 구현한다. 본 논문의 실험용 센서 네트워크는 방향성 정보를 사용하도록 수정한 ADV 메시지와 라우팅 관리 모듈을 지원하는 Nano-24 노드로 구성한다. 실험용 센서 네트워크의 에너지 효율 향상성은 실제 ADV 메시지 전송에 따른 실험 결과 분석울 통하여 나타내 보인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3413-3417
• /
• 2007

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from the outdoor air introduced into clean room. In the present study, an experiment was carried out to examine the improvement of removal efficiency for the gaseous contaminants. In order to improve the gas removal efficiency, a hot water contact heat exchanger was installed upstream of the air washer to heat and humidify the incoming outdoor air before entering the air washer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.890-891
• /
• 2011

This paper presents efficiency improvement of a universal motor used in a vacuum cleaner. The transient computation is carried out by employing finite element analysis with nonlinear material curves. Working point of magnetic field is investigated and operating frequencies are analyzed using harmonics analysis. New non-oriented electrical steel is developed for the motor regarding permeability and iron loss at the frequencies. Accordingly, new electrical steel is applied to the motor, which leads to improve efficiency of the motor.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.645-649
• /
• 2005

In this study, redesign of a vaporizer sea-water pump has been carried out using computational fluid dynamics. The flow field of the specified pump model is simulated and analyzed. In the flow analysis full pump model has been used, and multi-block grids are employed to solve the governing equations. In order to improve pump efficiency, systematic redesign has been performed to remove the flow recirculation near the hub of the diffuser vanes. The modified model shows about 4 % improvement in pump efficiency compared to the given model.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.285-291
• /
• 2015

원심분리기는 밀도가 다른 입자들이 관내에서 고속의 회전에 의해 발생되는 원심력을 받게 되면 원심력에 비례하는 속도로 밀도가 큰 입자는 빠르게 침강하고, 밀도가 작은 입자는 느리게 침강하여 관내에서의 이동거리에 차이가 발생하는 원리를 이용하는 장치이다. 본 연구의 대상이 되는 디캔터형 원심 분리기는 수 처리 공정에서 탈수된 농축 오물을 제거하는 장치로서 사용되는 것으로 슬러지 이송의 향상이 그 핵심 기술이다. 이에 본 논문에서는 이를 향상시키기 위하여 보울 플레이트 레일을 적용한 모델을 제안하였고, 슬러지 이송 효율 향상을 평가하기 위하여 입자 완화 유체동역학 기법을 이용하여 분석하였다. 수행된 해석은 보울 플레이트를 적용하지 않은 모델과 적용한 모델에 대하여 각각 적용하여 그 개선 정도를 정량화 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.835-842
• /
• 2009

The present thesis carried out a research on a compression pressure's reduction phenomenon and its countermeasure according to the thermal efficiency improvement method by a Miller method in 4-cycle low speed diesel engine. In case of retardation of intake valve closing time in a engine, the theoretical heat efficiency shows a remarkably reducing trend when a compression ratio is not compensated. Accordingly, the thermal efficiency showed an increasing trend in case of compensating the compression ratio. Especially, it could be understood that the theoretical heat efficiency at near ABDC $100^{\circ}$ of intake valve closing time in case of compensation of the compression ratio was improved by around 25.1%, and the mean effective pressure was also increased by around 18.6%. Also, as the retardation of intake valve closing time increases, air quantity becomes insufficient due to a backflow phenomenon of intake air and thus thermal efficiency was decreased in a high load operation domain. The solving method of this problem is possible by supercharge. Therefore, in order to improve thermal efficiency by retardation of ntake valve closing time, the thermal efficiency improvement according to low compression is possible when there are a compensation device of a compression ratio and a supercharge device. This is a problem-solving method of low compression and high expansion cycle.