• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.5
• /
• pp.245-249
• /
• 2006

This study tries to test and analyze the static friction torque generated by an electromagnetic clutch. Then the torque is improved by optimizing the shape of armature. For the purpose of design change and optimization of the electromagnetic clutch, the static friction torque prediction is very important. We construct an axi symmetric FEM model for analyzing the static friction torque and used a torque tester for evaluating the real torque. For a test, predicted static friction torque is compared with the experimental one to discuss the rationality of torque analysis process. The analytical result agrees well with experimental data, explaining the validity of the mathematical process and FEM model. After confirming the torque analysis process, the optimization process is investigated. The optimization result shows that the static torque is improved by changing the armature shape.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.1-4
• /
• 2007

Programmable Logic Controller(PLC) is the most widely utilized and plays an important role in industrial control system. Among PLC languages, Sequential Function Chart(SFC) is performed in small scale industrial process. On programming by SFC, a single sequence is utilized to control the simple process. In this paper, we propose the method that describe the improved single sequence and confirm its feasibility through an actual example.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.5
• /
• pp.314-322
• /
• 2009

In these days, automotive companies are trying to develop new manufacturing technologies and paradigms for rapid product development and production. The press die development process account for 40% of entire vehicle development process, and tryout process usually takes 3 to 4 months, and it is the biggest time portion out of dies manufacturing. Therefore, the effective tryout management system is essential to reduce time and cost of automotive press die production. This paper suggests improved process and practical application of tryout management using ubiquitous technology, and shows the results such as shorten time, improved quality and supporting of lifecycle engineering of press die.

• IE interfaces
• /
• v.16 no.1
• /
• pp.44-53
• /
• 2003

Ready-Mixed Concrete transportation business has been managed by the manual operation and intuitive decision making. This study is on the process improvement on ordering process, and allocation/transportation of trucks commuting between the batching plant and construction sites. Processes of order collection, job dispatch and allocation, and on-time-delivery are analysed and improved. The logistics control system, with GPS system, was developed and implemented based on the reconstructed processes. Performances are evaluated after improved business process and logistics system was applied, and it is shown that waiting time loss is decreased by 55%, and that efficiency is increased by 15%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.175-184
• /
• 2001

In this study, the improved throughput and stability in device fabrication could be obtained by applying CMP process to STi structue in 0.18 um semiconductor device. To employ the CMP process in STI structure, the Reverse Moat Process used to be added after STI Fill, as a result, the process became more complex and the defect were seriously increased than they had been,. Removal rate of each thin film in STI CMP was not uniform, so, the device must have been affected. That is, in case of excessive CMP, the damage on the active area was occurred, and in the case of insufficient CMP nitride remaining was happened on that area. Both of them deteriorated device characteristics. As a solution to these problems, the development of slurry having high removal rate and high oxide to nitride selectivity has been studied. The process using this slurry afford low defect levels, improved yield, and a simplified process flow. In this study, we evaluated the 'High Selectivity Slurry' to do a global planarization without reverse moat step, and also we evaluated EPD(Eend Point Detection) system with which 'in-situ end point detection' is possible.

• Journal of Sasang Constitutional Medicine
• /
• v.16 no.3
• /
• pp.139-142
• /
• 2004

1. Objectives In this study, it is experienced that the process of sweating is important in chronic cough of Taeumin. In this case report, the patient has been simproved throuth reaction of sweating improvement. In "Dongyi Soose Bowon", The process of sweating change is described in detail. "Hamkeylhae" is similar to chronic cough in "Dongyi Soose Bowon", it is cough that is hard to spit. The chronic cough of Taeumin is related to the pathology of Liver and Lung, sweating condition is also related to condition of Lung in Sasang constitutional medicine. So the study for the process of sweating is needed. 2. Methods One patient diagnosed as chronic cough was practiced with Sasang constitutional medicine. And We observed sweating change process during treatment. 3. Results As sweating condition improved, chronic cough also decreased, but not improved, not decreased. 4. Conclusions So treating of Taeumin's chronic cough is closely connected with sweating change process.

• Journal of Hydrogen and New Energy
• /
• v.33 no.5
• /
• pp.515-524
• /
• 2022

In this study, the on-site hydrogen production process for refueling stations that were not energy-optimized was improved through exergy analysis and heat exchange network synthesis. Furthermore, the process was scaled up from 30 Nm3/h to 150 Nm3/h to improve hydrogen production capacity. Exergy analysis results show that exergy destruction in the SMR reactor and the heat exchanger accounts for 58.1 and 19.8%, respectively. Thus, the process is improved by modifying the heat exchange network to reduce the exergy loss in these units. As a result of the process simulation analysis, thermal and exergy efficiency is improved from 75.7 to 78.6% and 68.1 to 70.4%, respectively. In conclusion, it is expected to improve the process efficiency when installing on-site hydrogen refueling stations.

• Structural Engineering and Mechanics
• /
• v.66 no.5
• /
• pp.649-663
• /
• 2018

The scaled boundary finite element method is extended to evaluate the dynamic stress intensity factors and T-stress with a numerical procedure based on the improved continued-fraction. The improved continued-fraction approach for the dynamic stiffness matrix is introduced to represent the inertial effect at high frequencies, which leads to numerically better conditioned matrices. After separating the singular stress term from other high order terms, the internal displacements can be obtained by numerical integration and no mesh refinement is needed around the crack tip. The condition numbers of coefficient matrix of the improved method are much smaller than that of the original method, which shows that the improved algorithm can obtain well-conditioned coefficient matrices, and the efficiency of the solution process and its stability can be significantly improved. Several numerical examples are presented to demonstrate the increased robustness and efficiency of the proposed method in both homogeneous and bimaterial crack problems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.99-104
• /
• 2015

This study analyzed the effects on displacement and stress as a result of improving the profile fastening method targeting rectangular-shaped and cube-shaped specimens. For the rectangular-shaped specimens, the improved fastening method reduced maximum displacement to 41.7% and maximum stress to 18.3% compared to the existing fastening method. For the cube-shaped specimens, maximum displacement and maximum stress results were found to be similar to those of the rectangular-shaped specimens. Thus, as a result of comparing the stress and displacement of the existing and improved fastening methods, it was found that the improved fastening method is superior to the existing fastening method in terms of load support.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.2029-2032
• /
• 2004

The quantity of data were rapidly increased recently and caused the data overwhelming. This led to be difficult in searching the required data. The method of eliminating redundant data was needed. One of the efficient methods was Knowledge Discovery in Database (KDD). Generally data can be separate into 2 cases, continuous data and discrete data. This paper describes algorithm that transforms continuous attributes into discrete ones. We present an Improved Class Attribute Interdependence Maximization (ICAIM), which designed to work with supervised data, for discretized process. The algorithm does not require user to predefine the number of intervals. ICAIM improved CAIM by using significant test to determine which interval should be merged to one interval. Our goal is to generate a minimal number of discrete intervals and improve accuracy for classified class. We used iris plant dataset (IRIS) to test this algorithm compare with CAIM algorithm.