• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1232-1240
• /
• 2018

This paper aims at designing an intelligent controller, based on control Lyapunov Function strategy integrated with fabricating discrete model of Buck and Boost converters and analyzing energy changes during the DC/DC progress to realize tracing reference current on Buck and Boost converters. In addition, practical stability phenomenon research and transient performance analysis has been proposed to give an insight to the influence of controller parameters in achieving an enhanced output performance and how the time of sample period affect the error of practical stability will be illustrated. The novelty of this controller in comparison to other schemes lies in the improved performance of practical stability.

• Structural Engineering and Mechanics
• /
• 제66권5호
• /
• pp.649-663
• /
• 2018

The scaled boundary finite element method is extended to evaluate the dynamic stress intensity factors and T-stress with a numerical procedure based on the improved continued-fraction. The improved continued-fraction approach for the dynamic stiffness matrix is introduced to represent the inertial effect at high frequencies, which leads to numerically better conditioned matrices. After separating the singular stress term from other high order terms, the internal displacements can be obtained by numerical integration and no mesh refinement is needed around the crack tip. The condition numbers of coefficient matrix of the improved method are much smaller than that of the original method, which shows that the improved algorithm can obtain well-conditioned coefficient matrices, and the efficiency of the solution process and its stability can be significantly improved. Several numerical examples are presented to demonstrate the increased robustness and efficiency of the proposed method in both homogeneous and bimaterial crack problems.

• 한국잠사곤충학회지
• /
• 제51권2호
• /
• pp.159-163
• /
• 2013

오디의 기능성이 언론에 홍보됨에 따라 오디 소비 촉진 및 가공제품에 관한 관심이 증대되고 있으나 오디즙 가공시 기능성 물질인 C3G 색소의 안정성에 관한 기초자료가 없는 실정이다. 이러한 문제점을 해결하고 오디의 이용확대를 위해 항산화색소 C3G의 안정성을 향상시킨 오디즙 가공방법을 개발하였다. 그 결과를 요약하면 다음과 같다. 1. 오디와 서당의 비율을 1 : 1로 하여 용기에 담고 식품첨가제인 구연산을 0.3% 첨가하는 것이 C3G 함량과 항산화능을 향상시키는 가장 좋은 방법이다. 올리고당의 경우 구연산을 첨가하는 것이 오히려 항산화능을 떨어뜨리므로 사용하지 않는 것이 좋다. 자일리톨의 경우 가공방법 중 가장 낮은 C3G 함량을 나타냈으나 구연산을 첨가하면 색소함량과 항산화능을 향상시키므로 반드시 구연산을 첨가한다. 2. 보관용기(투명유리병, 갈색유리병, 알루미늄 호일, 녹색유리병, 반투명유리병)보다 구연산의 첨가가 항산화색소 C3G의 안정성에 영향을 미치는 것으로 판단된다. 3. 오디즙 가공시 전자렌지를 이용하여 3분간 blanching 하여 색소의 안정성에 관여하는 효소를 불활성화 시키는 방법은 항산화색소 C3G 함량을 다소 떨어뜨리므로 냉동오디를 그대로 사용하는 것이 바람직하나 항산화능에 있어서는 보존기간동안 타 처리구에 비해 안정화시키는 효과를 나타냈다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.541-548
• /
• 2017

An increasing concern is paid to short-term voltage stability with the growth of penetration of induction motor loads. Reactive power reserve(RPR) of power system is critical to improve voltage stability. A definition of short-term voltage stability-related RPR(SVRPR) is proposed. Generators vary their contributions to voltage stability with their location and system condition, etc. Voltage support coefficient based on the second-order trace sensitivity method is proposed to evaluate SVRPR's contribution to short-term voltage stability. The evaluation method can account for the generator's reactive support in transient process and the contingency severity. Then an optimization model to improve short-term voltage stability is built. To deal with multiple contingencies, contingency weight taking into account both its probability and severity is proposed. The optimization problem is solved by primal dual interior point method. Testing on IEEE_39 bus system, it is indicated that the method proposed is effective. Short-term voltage stability is improved significantly by the way of SVRPR optimization. Hence, the approach can be used to prevent the happening of voltage collapse during system's contingency.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.91-96
• /
• 2002

This study was carried out to estimate the property of dimensional stability of heat compression of italian poplar wood with low density. Firstly, two levels of pressure conditions were applied using the closed and open-press system. The thermal treatment temperatures were 180℃ and 200℃, respectively. Water absorption tests were conducted in water bath at 25℃ and 100℃ for 35 hours and 1 hour, respectively. The compression rates of wood were 47 percent, 60 percent, and 73 percent, respectively. From these tests, it was found that the dimensional stability of the closed-press system was superior to that of the open-press system. Furthermore, the dimensional stability of compressed wood in the closed-press system was better at 200℃ than 180℃. In compression rate, dimensional stability of 73 percent compression rate was the best result. Considering these results, the best conditions for the dimensional stability of compressed wood were those of the closed-compressing system at high temperatures above 200℃ and larger compression rate. Therefore, it was concluded that the dimensional stability of wood is improved at higher temperature and larger deformation.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1082-1089
• /
• 2017

Negative output elementary super lift Luo converter (NOESLLC), which has the significant advantages including high-voltage transfer gain, high efficiency, high power density, and reduced output voltage/inductor current ripples when compared to the traditional DC-DC converters, is an attractive DC-DC converter for the field of negative DC voltage applications. In this study, in consideration of the voltage across the energy transferring capacitor changing abruptly at the beginning of each switching cycle, the improved averaged model of the NOESLLC operating in continuous conduction mode (CCM) is established. The improved DC model and transfer functions of the system are derived and analyzed. The current mode control is applied for this NOESLLC. The results from the theoretical calculations, the PSIM simulations and the circuit experiments show that the improved DC model and transfer functions here are more effective than the existed ones of the NOESLLC to describe its real dynamical behaviors.

• 전기화학회지
• /
• 제17권1호
• /
• pp.44-48
• /
• 2014

양성자교환막연료전지에서 사용할 탄화수소계 전해질 막 (술폰산화 폴리아릴렌에테르설폰)의 산화안정성을 향상시키기 위하여 세륨이온이 도입된 전해질 복합막을 제조하였다. 세륨이온의 함유 농도에 따른 산화안정성의 변화를 관찰하였고, 함수율 및 수소이온전도도에 미치는 영향을 조사하였다. ICP 분석을 통해 세륨이온의 함침여부를 검증하였고, NMR 피크의 화학적 이동으로 금속이온과 술폰산 그룹과의 배위여부를 확인하였다. 세륨이온의 함량이 증가함에 따라 이온전도도 및 함수율은 감소하였으나, 산화안정성은 향상되었다. 특히, 과산화수소폭로 가속화장치를 이용하여, 기존의 펜톤산화실험에 비해 실제 연료전지운전과 매우 유사한 조건에서 전해질 막의 산화안정성을 평가하였다.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.351-364
• /
• 2009

The thermal stability and elevated temperature mechanical properties of $SiC_P$/Al-11.7Fe-1.3V-1.7Si (Al-11.7Fe-1.3V-1.7Si reinforced with SiC particulates) composites sheets prepared by spray deposition (SD) $\rightarrow$ hot pressing $\rightarrow$ rolling process were investigated. The experimental results showed that the composite possessed high ${\sigma}_b$ (elevated temperature tensile strength), for instance, ${\sigma}_b$ was 315.8 MPa, which was tested at $315^{\circ}C$, meanwhile the figure was 232.6 MPa tested at $400^{\circ}C$, and the elongations were 2.5% and 1.4%, respectively. Furthermore, the composite sheets exhibited excellent thermal stability: the hardness showed no significant decline after annealing at $550^{\circ}C$ for 200 h or at $600^{\circ}C$ for 10 h. The good elevated temperature mechanical properties and excellent thermal stability should mainly be attributed to the formation of spherical ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase particulates in the aluminum matrix. Furthermore, the addition of SiC particles into the alloy is another important factor, which the following properties are responsible for. The resultant Si of the reaction between Al matrix and SiC particles diffused into Al matrix can stabilize ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase; in addition, the interface (Si layer) improved the wettability of Al/$SiC_P$, hence, elevated the bonding between them. Furthermore, the fine $Al_4C_3$ phase also strengthened the matrix as a dispersion-strengthened phase. Meanwhile, load is transferred from Al matrix to SiC particles, which increased the cooling rate of the melt droplets and improved the solution strengthening and dispersion strengthening.

• 한국해안·해양공학회논문집
• /
• 제22권2호
• /
• pp.88-94
• /
• 2010

외부안정성을 다룬 동반논문과 차별화하여, 이 논문에서는 심층혼합처리지반에 설치된 안벽의 내부안정성에 대한 정량적 위험도 평가를 위한 신뢰성해석 방법을 제안하였다. 내부안정성 위험도 평가를 위해 개량지반의 단지압, 전단강도 그리고 무개량토의 압출 파괴모드에 대해 MVFOSM, FORM 그리고 MCS를 적용하여 안정성을 검토하고 비교하였다. 심층혼합처리지반상 안벽의 내부안정성에 대한 신뢰성해석 결과, 흙-시멘트 개량체 압축강도의 변동성과 분포형태가 파괴확률에 큰 영향을 미치는 것으로 나타났으며 다른 확률변수들의 영향은 상대적으로 미미했다. 그러므로 흙-시멘트 개량체의 현장 압축강도에 대한 통계적 특성을 합리적이고 정확하게 결정하는 것이 중요하다.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.543-554
• /
• 1995

본 논문에서는 전동화 수동 휠체어 INMEL-VII를 위한 주행 안정성과 제어기의 개선에 관하여 연구하였다. 기 개발된 INMEL-VI의 2년 여에 걸친 현장 실험에서 오르막길에서의 후방 전복으로 인한 주행안정성, 모터의 PWM 제어로 인한 스위칭 노이즈, 심한 내리막길에서 주행 명령이 없어도 모터가 회전하는 문제들이 지적되었다. 이러한 문제를 해결하기 위해 INMEL-VII에서는 모터와 구동축을 직결하고 출력을 증가시켰으며 바퀴의 중심축을 이동하여 무게중심을 안쪽으로 이동시켜서 후방 전복 임계 경사각을 크게 증가시켰고, 스위칭 주파수를 5kHz로 설정하기 위해 하드웨어를 개선하였다. 또한 INMEL-VII에서는 다양한 가속 및 감속 루틴으로 소프트웨어의도 개선하였다. 현장 주행 실험 결과 기계적 구성과 소프트웨어의 개선으로 인한 주행 안정성이 증가되고 다양한 조작이 가능해졌음을 알 수 있었다. 본 연구결과로 장애자의 보행 보조기구연구에 기여하고 보행부자유자에게는 염가의 국산 전동휠체어를 사용할 수 있는 기화가 증가되기를 기대한다.