• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.312-316
• /
• 2010

Conformal mapping has been a familiar tool of science and engineering for generations. The methods of numerical mapping are usually classified into those which construct the map from standard domain such as the unit disk onto the 'problem domain', and those which construct the map in the reverse direction. We treat numerical conformal mapping from the unit disk onto the Jordan regions as the problem domain in this paper. The traditional standard methods of this type are based on Theodorsen integral equation. Wegmann's method is well known as a Newton-like efficient one for solving Theodorsen equation. An improved method for convergence by applying low frequency pass filter to the Wegmann's method was proposed. In this paper we propose an effective algorithm for numerical conformal mapping based on the improved method. This algorithm is able to determine the discrete numbers and initial values automatically in accordance with the given region and the required accuracy. This results come from analyzing the shape of given domain as seen in the Fourier Transform.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.1
• /
• pp.1-5
• /
• 2004

This paper deals with the design and analysis of a 2-phase Switched Reluctance Motor (SRM) used for the cooling fan motor of a refrigerator. To reduce the dead zone and improve the efficiency, the snail-earn type rotor pole and the asymmetric stator pole are investigated. For the optimal shape design, the performances of each model are obtained from numerical calculation results by 2D time-stepping finite element method (FEM) coupled with circuit equations. The accuracy of analysis is verified by comparing the analysis results with experimental data. According to the investigation results, improved shapes of stator and rotor poles are proposed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.22-31
• /
• 2002

In this paper, PVA(polyvinylalcohol), oxidized starch and SBR latex were used as binders for ink-jet printing papers, and their effects of the type and blending ratio of binders on ink-jet printing properties were compared. In case of coating color using PVA mainly used for a binder in ink-jet printing, spreading of printed letters decreased and excellent images were manifested resulting from strong hydrophilic of PVA. However, increasing solids content of coating color was somewhat limited because of the interaction of PVA and functional groups in silica as well as high molecular weight of PVA. When oxidized starch and SBR latex were mixed with PVA at desirable ratio to solve these problems, runnability in coating process was improved and good printing properties were shown. Gloss was improved when latex was used along with PVA as a binder because of the thermoplastic property of the latex. From this result, possibilities of high solids content and high gloss ink-jet printing papers were investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.1039-1043
• /
• 1996

In the firing operation, muzzle jumping phenomenon was investigated, and a method of reducing muzzle jump was suggested. The muzzle jumping force was determined from the torque acting on the rifle due to a recoil force. For the purpose of reducing a muzzle jump, the gas flowing through the M16A1 flash suppressor was considered. A flash suppressor, improved in reducing a muzzle imp, was modeled and tested. The experiment shows that muzzle jump has quantitative relation to shape of a flash suppressor, and can be reduced by the improved modeling of a flash suppressor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.406-410
• /
• 2006

Topology optimization of improved passive shock isolator by controlling its force-deflection relation is proposed. And the final design which is optimized using topology optimization is obtained using shape optimization. The proposed methods are applied to a numerical example using two dimensional-axisymmetric condition. And the performance of finally optimized design is verified through transient analysis using LS-DYNA. The ballistic shock isolator model is developed as a result of topology optimization. The optimized design has more improved shock absorbing capability comparing to the linear shock isolator by about 20%.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1172-1177
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW steam supply and power generation system. Three different test geometries have been chosen for the numerical simulation. The existing design for 300 kW HRSG system (CASE B) has been improved by geometry and position changes of inlet guide vanes along with gas velocity entrance angle at the diverging channel inlet (CASE C). Both cases has been compared with the case where hot combustion gas is directly injected without any guide vanes (CASE A). Improved design shows overall uniform velocity and temperature distribution compared to existing design.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.212-219
• /
• 1999

In this paper we investigated an applicability of earthquake regulations for seismic-isolated building structures which has been used currently and propose an efficient method for vertical distribution of seismic loads. The distribution of force is revised in UBC-94 as vertical distribution of force of UBC(Uniform Building Code)-91 is not sufficient safety but its distribution is inefficient expensive because of similar expression to fixed-based structures. In order to overcome this difficulties improved vertical distribution to fixed-based structures. In order to overcome this difficulties improved vertical distribution of seismic load is proposed using two degrees-of-freedom isolated structures and mode shape of fixed-based structures. Efficiency and accuracy of the proposed method are verified through analysis of an example structures with moment resisting frame and shear walls so this study approximate to dynamic analysis results in each case.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.710-711
• /
• 2006

High strength PM aluminium alloys Al-Zn-Mg-Cu (7075 type) were studied by using commercially available powder blends and the sinter-forging technique for component production. Principal areas of focus include the response to PM processing, micro structural assessment and material properties of Aluminium sinter forged products. Green preforms are successfully sintered to near full density by solid-supersolidus liquid phase sintering. Sinter forging method can produce components with net shape and mechanical characteristics of the material have improved greatly. Properties of this new PM Al-alloy were found to be reproducible in an industrial production environment.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.83-87
• /
• 2001

Many communication systems require bandpass filters with sharp skirt frequency characteristics in order to avoid the interferencce, which results in more order in the filter design. However, because of the limited Q values bandpass filters made of small sized ceramic resonators suffer from relatively large ripples at the band edges as the order of the filter increases. In order to compensate the large ripples while maintaining the sharp skirt frequency we propose a new RF amplitude equalizer. The equalizer made of two pole bandpass filter and an amplifier whose amplitude characteristics are the reverse of those of the bandapss filter. At the cellular band 9-pole bandpass filter with 10 MHz bandwidth exhibits 3 dB ripple when 8mm*8mm ceramic coaxial resonators are used. We added the RF equalizer to this filter and the flatness is improved as less than 1 dB.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.4
• /
• pp.45-51
• /
• 2011

The kimchi refrigerator is the electronic home appliance which is used for the maturing and a custody of the kimchi. In this paper, performance improvement of fan and duct system for kimchi refrigerator has been studied by using a commercial CFD code. In order to achieve a improved fan performance, three-dimensional computational fluid dynamics and the Design of Experiments method have been applied. Additionally, to know the optimized duct inlet shape with the optimized fan, the overall performances were calculated with various duct inlet shapes. The final fan and duct system for kimchi refrigerator showed improved performance in efficiency and total head compared with the existing model.