• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.202-211
• /
• 2018

This study was conducted to develop a salad dressing using Prunella vulgaris L. (PV) extracts. In addition, the study was also aimed at evaluating the quality characteristics of the salad dressing containing various amounts of PV extracts. Salad dressing was prepared by adding 0% (PD-0), 9.4% (PD-20), 18.8% (PD-40), 28.2% (PD-60), 37.6% (PD-80), 47.0% (PD-100) of PV extract. The quality characteristics (sugar contents, salinity, color value, total phenol contents, total flavonoid contents, DPPH, ABTS+ radical scavenging activities, and sensory acceptability) of the dressing were analyzed. According to the results of the study, the sugar contents and salinity of salad dressing increased according to the added amount of PV extract (p<0.001). The color values of lightness and yellowness of salad dressing increased according to the added amount of PV extract, whereas color value of redness decreased (p<0.001). Antioxidant activities were improved depending on the amount of PV extracts (p<0.001). The sensory acceptability (flavor, medicinal flavor, saltiness, sourness, bitterness and viscosity) were significantly higher in the dressing added with 18.8% PV extracts than in the other samples. Based on this result, a storage experiment was conducted by comparing PD-40 and PD-C. After 4 weeks of storage at $4^{\circ}C$ and $24^{\circ}C$, the quality characteristics were observed and the pH was increased in the later stages of storage (p<0.05). The depicted that, viscosity increased with storage time at $4^{\circ}C$ (p<0.001). General bacteria and coliform were not detected during storage. These results indicated that salad dressing with the addition of 18.8% PV extracts has the best quality.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2461-2465
• /
• 2013

Pd-$Ce/{\gamma}-Al_2O_3-TiO_2$ catalysts were prepared by combined sol-gel and impregnation methods. Transmission electron microscopy, X-ray diffraction, $H_2$-temperature-programmed reduction, $O_2$-temperature-programmed desorption, and ethanol oxidation experiments were conducted to determine the properties of the catalysts. Addition of an optimal amount of Ce improved the performance of the $Pd/{\gamma}-Al_2O_3-TiO_2$ catalyst in promoting the complete oxidation of ethanol. The catalyst with 1% Ce exhibited the highest activity, and catalyzed complete oxidation of ethanol at $175^{\circ}C$; its selectivity to $CO_2$ reached 87%. Characterization results show that addition of appropriate amount of Ce could enrich the PdO species, and weaken the Pd-O bonds, thus enhancing oxidation ability of the catalyst. Meanwhile, the introduction of $CeO_2$ could make PdO better dispersed on ${\gamma}-Al_2O_3-TiO_2$, which is beneficial for the improvement of the catalytic oxidation activity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.335-341
• /
• 2010

To improve the performance of inner loop based on PD controller for a unmanned helicopter, neural networks are applied. The performance of PD controller designed on the response characteristics of error dynamics decreases because of uncertain nonlinearities of the system. The nonlinearities are decoupled to modified dynamic inversion model(MDIM) and are compensated by the neural networks. For the training of the neural networks, online weight adaptation laws which are derived from Lyapunov's direct method are used to guarantee the stability of the controller. The results of the improved performance of PD controller by neural networks are illustrated in the simulation of unmanned helicopter with nonlinearities,

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.563-568
• /
• 2005

The Pt/C and Pd/C catalysts were prepared from conventional chloride precursors by adsorption or precipitation-deposition methods. Their activities for hydrogenation reactions of cyclohexene and acetophenone were compared with those of commercial catalysts. The Pt/C and Pd/C catalysts obtained from the adsorption procedure reveal higher hydrogenation activity than commercial catalysts and the catalysts prepared by the precipitation-deposition method. Their improved performances are attributed to the decreased metal crystallite sizes of Pt or Pd formed on the active carbon support upon the adsorption of the precursors probably due to the same negative charges of the chloride precursor and the carbon support. Under the preparation conditions studied, the reduction of the supported catalysts using borohydrides in liquid phase is superior to a gas phase reduction by using hydrogen in the viewpoint of particle size, hydrogenation activity and convenience.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.66-70
• /
• 2000

This paper deal with a design and a constant output power control of Zero Current Zero Voltage Switching(ZCZVS) resonant type DC-DC converter by a digital I-PD phase shift controller. When the DC-DC converter for a high density and a high effect control is operated in high speed switching, the switching loss and switching stress of the switching devices are increased. So, the ZCZVS method, which has the phase shift control with the digital I-PD controller, must be use in order to reduce its. And the constant output power voltage that controlled by the digital I-PD controller tracks a reference without steady state error in variable input voltage. The validity of control strategy that proposed is verified experimental results by the Digital Signal Processor TMS320C32.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.123-130
• /
• 2009

The partial discharge (PD) measurement is a very effective method to assess the winding insulation condition of high-voltage machines, since most of the insulation failure processes are directly or indirectly caused by PD. On-line PD measurements, which can detect insulation defects of winding in the early stages on rotating machines in operation, have been accepted as the most important technique. The epoxy mica capacitive coupler is currently and extensively used for on-line detection of PD pulses of high-voltage rotating machines. To evaluate the feasibility of developing a capacitive coupler that is easier to manufacture at a lower cost compared to epoxy mica couplers, a 100pF capacitive coupler made of ceramic material is designed, fabricated and tested for on-line PD measurements of 23 kV electrical machines. A series of electrical tests and accelerated aging tests are performed on the ceramic coupler to evaluate the performance requirements, long-term reliability and thermal stability for in field application. The test results show that the newly developed ceramic coupler provides equal and improved performance at a lower cost compared to epoxy mica couplers, and estimated voltage life is anticipated to surpass 100 years.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.227-232
• /
• 2021

In this paper, the narrow-band characteristic, which is the disadvantage of the existing the PD sensor, was improved by transforming the sensor shape into a trapezoidal shape to improve the characteristics of the dipole-shaped conventional PD(Patial Discharge) sensor. In addition, by applying a cavity structure, which is a structure that can fundamentally block the electromagnetic wave signal from the outside as it is used for an external sensor, it is a partial discharge sensor that takes advantage of the structural advantages of low cost and convenience of installation. As a result of the experiment, it was shown that there is a broadband characteristic of about 70.5%(1.59~3.32GHz) at the center frequency of 2.45GHz, and the broadband characteristic was confirmed.

• Journal of Environmental Science International
• /
• v.32 no.10
• /
• pp.723-729
• /
• 2023

Parkinson's disease (PD) is the second most common neurodegenerative disorder, characterized by dopaminergic neuronal loss in the substantia nigra, resulting in reduced dopamine levels and consequent motor dysfunction. Genetic and environmental factors contribute to oxidative stress in PD. Cicadidae Periostracum (CP), a traditional Korean medicine, has shown neuroprotective effects against MPTP-induced neurotoxicity in PD. However, its effects on the 6-hydroxydopamine (6-OHDA) model have not been established. This study examined CP's effects on a 6-OHDA-induced PD model. CP protected against 6-OHDA damage in both in vitro and in vivo studies. Furthermore, CP reduced the production of reactive oxygen species, inhibited apoptosis, preserved dopamine levels, protected tyrosine hydroxylase in the substantia nigra, and improved motor function. These findings suggest that CP may delay PD progression by maintaining the redox balance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.135-137
• /
• 1995

A new design method is proposed for a fuzzy PD controller. By analyzing phase plane characteristics we can build and optimize the rule base of fuzzy logic controller. Also, a new gain tuning method is used to improve performance in the transient and steady state. The improved performance of the new methodology is shown by an application to the design of control system with a highly nonlinear actuator.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.295-300
• /
• 2000

Uniform silicon tip arrays were fabricated using the reactive ion etching followed by the reoxidation sharpening, and the effect of Pd-coated layer on electron emission characteristics was studied. The electron emission from Si field emitter arrays(FEAs) was a little, but improved by removing surface oxide on the FEA, but pronounced drastically by coating a $100-{\AA}-thick$ Pd metal layer. The turn-on voltage in the Pd-coated Si FEAs was reduced by 30 V in comparison with that in uncoated ones. This results from the increase of surface roughness at the tip apex by the Pd coating on Si FEA, via the decrease of the apex radius at which electrons are emitting. The Pd-coated emitters showed superior operating stability over a wide current range to that of the uncoated ones. This suggests that Pd coating enhances the high temperature stability and the surface inertness Si FEA.