• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.884-891
• /
• 2017

The improved transfer functions of the modified Sheppard-Taylor (MS-T) converter, which is capable of regulating output voltage under a wide range of input voltage and load variations, negligible current ripple, and fewer components in comparison to the Sheppard-Taylor (S-T) converter, operating in continuous conduction mode (CCM) are investigated in this study. Its DC equilibrium point, small signal model, and transfer functions are derived and analyzed. Then, the voltage controller is applied for this MS-T converter. The comparisons between the derived model and the existing model are presented. The hardware circuit is designed and the circuit experiments are provided for validation. The results show that the improved transfer functions of the MS-T converter are more effective and general than the previous ones for describing its real characteristics.

• Nonlinear Functional Analysis and Applications
• /
• 제27권1호
• /
• pp.59-82
• /
• 2022

In this paper, we present a modified (improved) generalized M-iteration with the inertial technique for three quasi-nonexpansive multivalued mappings in a real Hilbert space. In addition, we obtain a weak convergence result under suitable conditions and the strong convergence result is achieved using the hybrid projection method with our modified generalized M-iteration. Finally, we apply our convergence results to certain optimization problem, and present some numerical experiments to show the efficiency and applicability of the proposed method in comparison with other improved iterative methods (modified SP-iterative scheme) in the literature. The results obtained in this paper extend, generalize and improve several results in this direction.

• 대한방사선기술학회지:방사선기술과학
• /
• 제1권1호
• /
• pp.25-29
• /
• 1978

This study was done for the purpose of graphing rather improved technique through reviewing conventional technigue of the thoracic vertebrae lateral projection. The roentgenographic images which were taken at Korea University Hospital from January, 1976 to December, 1977 were observed for this study. The results were as belows: 1. The quality of diagnostic radiograph turned out that good is 21.4%, intermediate is 40.7% and poor is 37.9%. 2. The poor quality of images the caused by overlapping shadows(59.6%), incorrect position of patients(15.0%), motion of patients(7.5%), over-exposure(8.3%), under-exposure(6.7%) and processing faults(2.9%). The images were taken by following four methods of experiments were campared and researched in order to improve the problems of conventional technigues which were came out on the poor radiographes. 1. (Method 1) Low mA-long time exposure during normal respiration 2. (Method 2) Short time exposure during normal respiration 3. (Method 3) After deep inspiration, short time exposure during expiration 4. (Method 4) After full expiration, short time exposure during inspiration. In a result of the above experiments, it was found that the improved image could be got from the method 3.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2000년도 제17차 정기총회 및 학술발표
• /
• pp.102-105
• /
• 2000

These studies were conducted to investigate the effect of dietary supplemental lincomycin at different food waste supplements on performance of broiler chicks. Diets were based corn, soybean meal and contained 3,100kcal/kg ME, 21% CP for the rest two weeks. Three levels of dietary lincomycin(LM; 0,2.2, 4.4mg/kg) and food waste(FW; 0, 7.5, 15%) were respectively inclusion in both experiments. In experiment 1, weight gain of birds fed 4.4mg/kg LM was significantly higher than no LM treatments(P<0.05). It tended to increase in 7.5% food waste treatment compared to that of control, but was not significantly different. FCR of chicks fed 2.2mg/kg LM supplement was significantly improved compared to that of other treatments Chicks fed food waste showed inferior FCR to control as dietary FW level increased(P<0.05). There was no significance in blood components among treatments. In experiment 2, weight gain of chicks fed 15% FW exhibited higher weight gain than that of other treatments. As FW supplement increased, the feed intake increased significantly(P<0.05) There was no significance in blood components except serum calcium. The results of these experiments indicated that hicks fed 4.4mg/kg LM supplements maximized growth rate of all treatments, and improved FCR in 2.2mg/kg LM.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.240-244
• /
• 2006

As high-definition television(HDTV) broadcasting becoming more generalized, there have been many researches and developments about a large storage capacity and a fast data transfer rate in optical disk drives (ODD). Pickup actuators must have high flexible mode frequencies and large gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method in considering of the bonding layer. And, the flexible mode frequency of actuator is improved by Design of Experiments of lens holder. The Magnet circuit is designed considering the relation with the moving part. Through improving the yoke design, the magnetic flux is changed and the DC tilt is reduced. Consequently, we designed an actuator which has a high flexible mode frequency and a large gain margins.

• 한국통신학회논문지
• /
• 제7권2호
• /
• pp.47-54
• /
• 1982

본 논문에서는 A/D, D/A 변환의 한 방식인 1-bit interpolation 방법을 개선, 보완한 1-bit interpolation per-channel u-law companding PCM변환방법을 제시하고 실험회로를 구성하여 이의 동작을 확인하였다. 실험회로는 시중에서 입수하기 수월한 소자들인 TTl, logic IC 및 741 OP Amp 등으로 구성하였다. 실험결과로서는 40dB에 걸친 입력 dynamic range와 40dB 이상의 출력 dynamic range를 얻을 수 있었다. 본 논문에서 제시한 per-channel A/D, D/A변환기는 현용의 공통 codec의 단점을 충분히 보완시킬 수 있을 뿐 아니라 다중화에 있어서도 상당한 잇점을 지니고 있다.

• 한국표면공학회지
• /
• 제30권2호
• /
• pp.93-103
• /
• 1997

High temperature materials used in the elevated temperature and corrosive atmosphere must have the good oxidation resistance and preserve their own mechanical properties simultaneously. For the oxidation resistance, it is very important to form a protective oxide scale such as $Al_2O_3$ or $Cr_2O_3$ on the substrate. However, the additions of protective oxide forming elements such as Cr and Al in the alloy to enhance its oxidation resistance are limited due to the deleterious effects on their mechanical properties. PECVD(P1asma Enhanced Chemical Vapor Deposition) coating processes were employed to improve the oxidation resistance at high temperature. Cr and/or A1 were coated on the substrates of Ni and Inconel 600 at various temperatures of 400, 500, $600^{\circ}C$ and at different conditions of specimen surfaces. Then, coated specimens were exposed to isothermal and cyclic oxidation conditions in air at 1000 and $1100^{\circ}C$. In order to enhance the adhesion between the substrate and coated layer, heat treatments of the coated specimens were conducted in a vacuum. At isothermal oxidation experiments, Al-coated Ni specimen showed better oxidation resistance than pure Ni. At cyclic oxidation experiments at $1000^{\circ}C$. Cr and Al-coated specimen showed better oxidation resistance. Cr-coated Inconel 600 had also showed better oxidation resistance due to Cr in the substrate. By PECVD coating process, oxidation resistance could be improved, but it was not improved as expected due to the weakness of the adhesion between the substrate and the coated layer.

• Journal of Information Technology Applications and Management
• /
• 제30권4호
• /
• pp.29-38
• /
• 2023

A single-learner model which integrates the user's positive and negative perceptions is proposed by augmenting counterfactual data to the interaction data between users and items, which are mainly used in collaborative filtering in this study. The proposed CausRec showed superior performance compared to the existing NCF model in terms of F1 value and AUC in experiments using three published datasets: MovieLens 100K, Amazon Gift Card, and Amazon Magazine. Compared to the existing NCF model, the F1 and AUC values of CausRec showed 1.2% and 2.6% performance improvement in MovieLens 100K data, and 2.2% and 10% improvement in Amazon Gift Card data, respectively. In particular, in experiments using Amazon Magazine data, F1 and AUC values were improved by 11.7% and 21.9%, respectively, showing a significant performance improvement effect. The performance of CausRec is improved because both positive and negative perceptions of the item were reflected in the recommendation at the same time. It is judged that the proposed method was able to improve the performance of the collaborative filtering because it can simultaneously alleviate the sparsity and imbalance problems of the interaction data.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권10호
• /
• pp.1456-1463
• /
• 2011

A total of 629 Duroc${\times}$Landrace${\times}$Large White crossbred pigs were utilized in three experiments (Exp. 1, 222 pigs weighing $25.6{\pm}2.0\;kg$ BW; Exp. 2, 216 pigs weighing 5$6.2{\pm}4.3\;kg$ BW; Exp. 3, 191 pigs weighing $86.4{\pm}4.6\;kg$ BW) conducted to determine the effects of fermented potato pulp on performance, nutrient digestibility, carcass traits and plasma parameters in growingfinishing pigs. Each experiment lasted 28 d. The pigs were assigned to one of two corn-soybean meal-based diets containing 0 or 5% fermented potato pulp. The inclusion of fermented potato pulp increased weight gain (p<0.05) in experiments 1 and 2 and increased feed intake (p<0.05) in experiment 2. Feed conversion was improved (p<0.05) in experiment 2 and showed a tendency to improve (p<0.10) in experiments 1 and 3 when pigs were fed fermented potato pulp. Fermented potato pulp increased (p<0.05) dry matter digestibility in experiments 1 and 3 and energy digestibility in experiment 2. Feeding fermented potato pulp decreased plasma urea nitrogen (p<0.05) and alanine aminotransferase (p<0.05) in experiments 1 and 2, while plasma aspartate aminotransferase was decreased (p<0.05) in experiment 3. Dietary fermented potato pulp did not affect the carcass characteristics of finishing pigs. Feeding fermented potato pulp reduced (p<0.05) fecal ammonia concentration in all three experiments. In conclusion, feeding growing-finishing pigs diets containing 5% fermented potato pulp improved weight gain and feed conversion without any detrimental effects on carcass traits. The improvements in pig performance appeared to be mediated by improvements in nutrient digestibility.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1786-1790
• /
• 2004

The main objective of this paper is to analyze the performance of various force control algorithms in improving and adjusting the compliance of industrial robots in contact with their environment. Some of fundamental force control algorithms such as sensorless control, impedance control and hybrid position/force control are theoretically analyzed and simulated for various situations of an environment, and then a series of experiments using them were performed. In this paper, a control scheme to use position control in implementing the impedance control was investigated in order to nullify the effect of joint friction. The new reference trajectory is generated using contact force feedback and original desired trajectory. And an inner position control loop is designed to provide accurate position tracking for the new reference trajectory and good disturbance rejection. Experiments to insert a peg in a hole (so-called the peg-in-a-hole task) were performed with HILS (hardware-in-theloop simulation) system based on the results of the analyses and simulations on the characteristics of each control algorithm. The experiments showed that various force control methods improved the performance of robots in close contact with the environment by adjusting their compliance with respect to an arbitrary set of coordinates.