• 한국의상디자인학회지
• /
• 제3권2호
• /
• pp.107-119
• /
• 2001

Compared on dye, pigment is not colored to textiles, fixed by binders, so it has been used for less expensive textiles. However, the function of a binder hs been improved s organic chemical industry develops, and the flexibility and softness of textiles hs gotten better. Some of dye printing is being replace by pigment printing. Pigment printing skills illuminated and make colors represented cleariy. Since their durabillty is reasonably good and washing processes are not needed, further development of these printing skills are predictable. This study suggests color samples though theoretical researches and experiments on pigment printing that causes less pollution and en be colored on any type of textiles. Especially, over printing can be used in industrial fields because it saves processing and expense. For the improvement of pigment printing skills, more improved studies on binders are expected.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.569-570
• /
• 2009

An improvement of the test method is proposed to more accurately measure early-age autogenous shrinkage in concrete particularly within first 24 hours after casting. Experiments were conducted considering existing and improved method. In improved method, hydration temperature was artificially controlled to prevent thermal deformations. Test results indicate that the autogenous shrinkage calculated by existing approach is underestimated which might be due to the wrong assumption of considering the thermal dilation coefficient to be constant (equal to 10 ${\times}$ $10^{-6}/^{\circ}C$) at early-age. We recommend that the proposed method should be adopted to better assess precise value of autogenous shrinkage or an appropriate method of determining the time-evolution of thermal dilation coefficient be considered.

• Journal of information and communication convergence engineering
• /
• 제13권3호
• /
• pp.215-219
• /
• 2015

Cells in a culture process transform with time and produce many overlapping cells in their vicinity. We are interested in a separation algorithm for images of overlapping cells taken using a fluorescence optical microscope system during a cell culture process. In this study, all cells are assumed to have an ellipse-like shape. For an ellipse fitting-based method, an improved least squares method is used by decomposing the design matrix into quadratic and linear parts for the separation of overlapping cells. Through various experiments, the improved least squares method (numerically stable direct least squares fitting [NSDLSF]) is compared with the conventional least squares method (direct least squares fitting [DLSF]). The results reveal that NSDLSF has a successful separation ratio with an average accuracy of 95% for two overlapping cells, an average accuracy of 91% for three overlapping cells, and about 82% accuracy for four overlapping cells.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.127-135
• /
• 2017

Recently the researches on modular multi-level converter (MMC) are being highlighted because high quality and efficient power transmission have become key issues in high voltage direct current (HVDC) systems. This paper proposes an improved pre-charging method for the sub-module (SM) capacitor of MMC-based HVDC systems, which operates in the nearest level control (NLC) modulation and does not need additional circuits or pulse width modulation (PWM) techniques. The feasibility of the proposed method was verified through computer simulations for a scaled 3-phase 10kVA MMC with 12 SMs per each arm. Hardware experiments with a scaled prototype have also been performed in the lab to confirm the simulation results.

• 한국정보처리학회논문지
• /
• 제7권8호
• /
• pp.2520-2527
• /
• 2000

전력 평가를 위한 전이 밀도 전파에 대한 개선된 방법을 제안한다. 제로 지연 모델을 위한 전력 평가는 전력 소모의 하한 경계 값에 대한 적절한 기준이다. 전력 예측을 위한 하한 값으로 제로 지연 모델을 사용한 전이 전파 방법에 대한 연구가 있지만 전이 밀도 전파 과정 중 잉여 요소들을 제거하지 못하였다. 본 연구에서는 전이 전파 밀도 동작을 분석함에 의하여 잉여 요소들을 제거할 수 있는 향상된 신호 전이 밀도 예측 기법을 제안한다. 실험에 의하면 제안된 방법이 기존의 방법에 비하여 상대적으로 양호한 예측 정확도를 나타낸다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.900-903
• /
• 2002

This paper proposes the use of wavelet packet transform in a transform based video coding scheme, which is mainly used in low/very low bit-rate video coding schemes i.e. H.263 standard. In the experiments, the discrete cosine transform in the video coding scheme is replaced by the wavelet packet transform, and the improved performance in term of peak signal to noise ratio is measured and compared with the results obtained from the coding scheme implementing the ordinary wavelet transform. The experimental results show an impressive improvement obtained from the use of wavelet packet transform.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.15-18
• /
• 2003

This paper proposes a color matching 3D look-up table simplifying the complex color matching procedure between a monitor and a mobile display device. In order to perform color matching, it is necessary to process color of image in the device independent color space like CIEXYZ or CIELAB. We improved the S-curve model to have smaller characterization error than tolerance error. Also, as a result of the experiments, we concluded that the color matching look-up table with 64(4$\times$4$\times$4) is the smallest size allowing characterization error to be acceptable.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.102-106
• /
• 2015

In this paper, we study the optimal design for improved rotation latch system performance. The factors affecting the Torque generated in the armature were chosen as design variables. Utilizing the vertical matrix, the orthogonal array table was created to predict the results through minimal analysis. To confirm the Torque generation amount, by utilizing the commercial electromagnetic analysis software MAXWELL, finite element analysis was performed. The approximation method and experimental design through the commercial PIDO tool PIAnO for optimal design and calculations were utilized to perform experiments using an optimization method with evolutionary algorithms. Using the approximation model, design factors were determined that can maximize the torque generated in the armature, and the simulation was performed.

• 한국정밀공학회지
• /
• 제30권7호
• /
• pp.717-724
• /
• 2013

Industrial cranes are indispensable equipment in heavy industry. However, unwanted vibrations in cranes often cause accidents. Input shaping is widely accepted as a useful tool for removing residual vibration in cranes. A unity magnitude zero vibration (UMZV) input shaper is often used for cranes driven by on-off-type motors. However, although a UMZV input shaper minimizes residual vibration, the input shaper cannot prevent the crane from moving slightly further than expected from the original command. This paper describes an improved method of input shaping that can compensate for position inaccuracies, as well as remove the residual vibration of cranes. Experiments were performed to validate the proposed input-shaping method, illustrated through numerical simulations.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 제15회 음성통신 및 신호처리 워크샵(KSCSP 98 15권1호)
• /
• pp.250-253
• /
• 1998

In digital communicatioin networks, speech recognition systems conventionally reconstruct speech followed by extracting feature [parameters. In this paper, we consider a useful approach by incorporating speech coding parameters into the speech recognizer. Most speech coders employed in the networks represent line spectral pairs as spectral parameters. In order to improve the recognition performance of the LSP-based speech recognizer, we introduce two different ways: one is to devise weighed distance measures of LSPs and the other is to transform LSPs into a new feature set, named a pseudo-cepstrum. Experiments on speaker-independent connected-digit recognition showed that the weighted distance measures significantly improved the recognition accuracy than the unweighted one of LSPs. Especially we could obtain more improved performance by using PCEP. Compared to the conventional methods employing mel-frequency cepstral coefficients, the proposed methods achieved higher performance in recognition accuracies.