• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.30-35
• /
• 2013

In order to increase cell efficiency in crystalline silicon solar cell, reduction of light reflection is one of the essential problem. Until now silicon wafer was textured by wet etching process which has random patterns along crystal orientation. In this study, high aspect ratio patterns are manufactured by nano imprint process and reflectance could be minimized under 1%. After that, screen printed solar cell was fabricated on the textured wafer and I-V characteristics was measured by solar simulator. Consequently cell efficiency of solar cell fabricated using the wafer textured by nano imprint process increased 1.15% than reference solar cell textured by wet etching. Internal quantum efficiency was increased in the range of IR wave length but decreased in the UV wavelength. In spite of improved result, optimization between nano imprinted pattern and solar cell process should be followed.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1921-1926
• /
• 2003

Nano-imprint technology has been vigorously studied by many researchers for it is one of the most promising technologies for manufacturing the pattern with its critical dimension below 100nm. In the nano-imprint technology, nano patterns are transferred on a polymer film and the transferred patterns are used as an etch mask to define the designed patterns on a substrate or a metal layer. To this end, it is important to keep the residual thickness of the imprinted polymer film uniform. In this study, a novel measurement technique to measure the residual thickness of films is proposed based on nanoindentation theory. This technique has advantages of saving time and measuring the residual thickness of highly-localized portions in comparison with other techniques, but has limitation of requiring calibration process.

• The Korean Journal of Cytopathology
• /
• v.18 no.1
• /
• pp.81-86
• /
• 2007

Desmoplastic small round cell tumor (DSRCT) is a rare malignant mesenchymal neoplasm. It mainly involves the abdominal or pelvic peritoneum of male adolescents. We report here the imprint cytologic features of a case of DSRCT occurring in the intraabdominal cavity of a 21-year-old man. A microscopic examination showed moderate cellularity. The tumor cells were singly arranged and arranged in clusters. The cells had round to oval nuclei with finely granular chromatin, inconspicuous nucleoli and scanty cytoplasm. Some tumor cells showed nuclear molding, and some cells had an epitheloid appearance with a large amount of lightly eosinophilic cytoplasm. A rosette-like pattern was present. Spindle-shaped, fibroblastic stromal cells were occasionally found. The tumor cells were immunoreactive for the markers cytokeratin (AE1/AE3), epithelial membrane antigen (EMA), desmin, vimentin and neuron specific enolase (NSE).

• The Korean Journal of Cytopathology
• /
• v.18 no.2
• /
• pp.170-174
• /
• 2007

Granular cell tumor is a rare tumor of the soft tissue and this is characterized by proliferation of large cells with granular appearing eosinophilic cytoplasm. We report the imprint cytologic features of a case of granular cell tumor in the left calf of a 52-year-old woman. Microscopic examination showed moderate cellularity. The tumor cells were arranged both as single cells and in clusters. The cells were large polygonal-shaped and they had small round nuclei with finely granular chromatin and occasionally conspicuous nucleoli. The cytoplasm was abundant eosinophilic and granular. Naked nuclei and spindle-shaped tumor cells were occasionally noted. No mitosis and necrosis were present. The background showed cytoplasmic granular materials. The tumor cells showed positivity for S-100 protein. Ultrastructurally, abundant lysosomes were present in the cytoplasm of the tumor cells.

• The Korean Journal of Cytopathology
• /
• v.19 no.2
• /
• pp.188-193
• /
• 2008

Angiomyolipoma of the liver is a rare benign tumor that's composed of variable mixtures of adipose tissue, smooth muscle and thick-walled blood vessels. We report here on the imprint cytologic features of a hepatic angiomyolipoma in a 47-year-old man. The smears showed spindle and epithelioid tumor cells in clusters, trabeculae and single cells. The spindle cells had elongated, cigar-shaped nuclei with finely granular chromatin and fibrillary cytoplasm. The epithelioid cells had round nuclei with a moderate amount of cytoplasm. Any adipose tissue was not found. Immunohistochemically, both the spindle and epithelioid cells revealed cytoplasmic positivity for smooth muscle actin and HMB-45.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.219-219
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단문자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가test가 실시하였다. 20 회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.209-209
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단분자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가 test가 실시하였다. 20회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을 수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.206-206
• /
• 2007

PCB기판 제작에 있어서 미세패턴을 형성하기 위한 차세대 공법으로 imprint공법을 이용하여 PCB기판제작에 대한 내용입니다. imprinting을 하기 위해서 미세때턴이 형성된 Tool-foil을 이용하여 imprinting시 Via hole을 동시 가공을 함으로서, 공정 비용 절감과 공정 프로세스 단축의 효과를 볼수 있다. 하지만 대면적(405*510size) imprint용 N-stamp제작이 쉽지 않으며, Ni-stamp가격 또한 만만치 않으며, 대면적 size일수록 이형처리 또한 쉽지 않다. 이형문제와 Stamp제작 비용을 줄이기 Cu-stamp를 제작 하여, Imprint후 이형처리 하지 않으며, Stamp제작 또한 쉬우며, 가격도 싸기 때문에 그에 따른 기대효과를 간략하게 소개 하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.207-208
• /
• 2007

Recently, high performance microelectronic devices are designed in multi-layer structure in order to make dense wiring of metal conductors in compact size. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. In this work, we synthesized dielectric composite materials based on epoxy resin, and investigated their thermal stabilities and dynamic mechanical properties for thermal imprint lithography. In order to enhance the mechanical properties and toughness of dielectric material, various modified polyetherimide(PEI) was applied in the resin system. Curing behaviours, thermal stabilities, and dynamic mechanical properties of the dielectric materials cured with various conditions were studied using dynamic differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), and Universal Test Method (INSTRON).

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.63-67
• /
• 2009

STATEMENT OF PROBLEM. Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in achieving appropriate bonding strength of tray material and impression material. PURPOSE. This study is to investigate an appropriate drying time of tray adhesives by evaluating tensile bonding strength between two types of polyvinylsiloxane impression materials and resin tray, according to various drying time intervals of tray adhesives, and with different manufacturing company combination of impression material and tray adhesive. MATERIAL AND METHODS. Adhesives used in this study were Silfix (Dentsply Caulk, Milford, Del, USA) and VPS Tray Adhesive (3M ESPE, Seefeld, Germany) and impression materials were Aquasil Ultra (monophase regular set, Dentsply Caulk, Milford, Del, USA) and Imprint II Garant (regular body, 3M ESPE, Seefeld, Germany). They were used combinations from the same manufacture and exchanged combinations of the two. The drying time was designed to air dry, 5 minutes, 10 minutes, 15 minutes, 20 minutes, and 25 minutes. Total 240 of test specimens were prepared by auto-polymerizing tray material(Instant Tray Mix, Lang, Wheeling, Il, USA) with 10 specimens in each group. The specimens were placed in the Universal Testing machine (Instron, model 3366, Instron Corp, University avenue, Nowood, MA, USA) to perform the tensile test (cross head speed 5 mm/min). The statistically efficient drying time was evaluated through ANOVA and Scheffe test. All the tests were performed at 95% confidence level. RESULTS. The results revealed that at least 10 minutes is needed for Silfix-Aquasil, and 15 minutes for VPS Tray Adhesive-Imprint II, to attain an appropriate tensile bonding strength. VPS Tray Adhesive-Imprint II had a superior tensile bonding strength when compared to Silfix-Aquasil over 15 minutes. Silfix-Aquasil had a superior bonding strength to VPS Tray Adhesive-Aquasil, and VPS Tray Adhesive-Imprint II had a superior tensile bonding strength to Silfix-Imprint II at all drying periods. CONCLUSION. Significant increase in tensile bonding strength with Silfix-Aquasil and VPS Tray adhesive-Imprint II combination until 10 and 15 minutes respectively. Tray adhesive-impression material combination from the same company presented higher tensile bonding strength at all drying time intervals than when using tray adhesive-impression material of different manufactures.