• The Journal of Korean Academy of Prosthodontics
• /
• v.9 no.1
• /
• pp.9-15
• /
• 1969

The purpose of this study was to examine arch form, occlusion in centric occlusion. Male 561 case, Female 305 case were impressioned with alginate impression material, and plaster models were made. Occlusion and maxillary dental arch were studied on plaster models in Korean adults aged from 18 to 60 Years. The results were as follows. 1. The upper dental arch was U-type(57.77%), O-type(23.52%), V-type(18.71%) in male, and U-type(60.66%), O-type(27.11%), V-type(12.13%) in female. 2. The commonest type of the anterior bite was 1-form($68.09{\pm}1.97%$) in male, ($72.46{\pm}2.56%$) in female, and posterior bite was 1-form($65.06{\pm}2.01%$) in male, ($69.51{\pm}2.64%$ in female. 3. In the maxillary dental arch U-type was frequented and the relationship of occlusion in upper and lower dental arch was mainly 1-form.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.268-271
• /
• 2010

In this paper, forward and reverse analysis is introduced in order to estimate the elastic-plastic properties from a power-law hardening bulk specimen materials with one simple spherical indentation impression test. In order to verify the reliability of the reverse analysis, we have simulated about a large range of materials that essentially cover all engineering materials, using ABAQUS(6.91) program. Then, we could obtained the fitting functions and plastic parameters from the numerical analysis results. Next, through the procedure of reverse analysis we can obtain the yield stress and power-law exponent. Finally, obtain good agreement between the result from reverse analysis and initial input data from experiment.

• Journal of Technologic Dentistry
• /
• v.44 no.1
• /
• pp.24-30
• /
• 2022

This research introduces the manufacturing process of the metal-framework of one of the maxillary partial dentures, the "obturator", using milling wax-blocks, for patients with palate loss due to oral cancer. It explains the protocol of taking the patient's oral impression, preparation of a working cast, scanning, designing using a computer-aided design program, investing the milling wax-blocks, and completing the obturator. This method does not follow the traditional wax and agar process thereby reducing the errors arising during the manufacturing process and decreasing the time, material, and labor required. Moreover, the retention, stability, and compatibility of the metal framework were observed to be high in both the working cast and oral cavity.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.113-118
• /
• 2006

The lobby is the space that contributes the most to conveying the first impression of an enterprise or company that is occupying a building, and enhances the quality of the urban or business environment around an office building. Transparency is the biggest change in architecture since the modern age began, and it is the most important element of the lobby expression methods. Therefore this study was an attempt to understand the expression method of transparency which is expressed in the lobby space of office buildings, and used documentary survey and field survey to analyze it. In the examination of the theoretical background of transparency to make a specific study purpose, and based on an on-the-spot probe document, an attempt was made to grasp the expression method of Visual Transparency and Phenomenal Transparency. The data collected during this investigation was studied and a correlation coefficient. A summary of the findings of this study is as follows: 1) Transparent materials does not appear often in floors. But Phenomenal Transparency material is used in the floor. 2) During the survey it was discovered that Visual Transparency was often used in the walls of each investigated building. Phenomenal Transparency materials are found less in walls than in the floors of lobbies. 3) The expression methods that appeared the most in ceilings among the Visual Transparent expression methods. In the case of Phenomenal Transparency, the highest distribution is seen in ceilings. 4) The result of the analyzation of the correlation coefficient of Visual Transparency and Phenomenal Transparency is as follows: Expression method: There is more than one expression method of transparency, 'Open Sight', 'Light Material' and 'Surface Material' methods were introduced in case of the introduction of 'Transparent Material' among Visual Transparency in office building lobby space planning. If the 'Superimposed Space' method is introduced, then the 'Ambiguous Border' or 'Dual Sight' methods are introduced.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.22 no.1
• /
• pp.22-29
• /
• 2013

In general, to conduct aesthetic restorations, various analyses are carried out using a camera from the initial examination with the final prosthesis in consideration. With the reality that many dentists are using digital cameras, it can be considered that the time of digital impression has already started. Just as the recent general trend is that more and more internationally renowned photographers are switching their film cameras to digital counterparts, it is likely that CAD/CAM will show another direction in the area of the aesthetic dentistry that we may want to pursue. With the word 'digital', the convenience and economics often come to mind in the first place. However, from the dental clinical viewpoint, it is important to improve and develop the CAD/CAM system based on understanding its specialty and superiority while respecting the conventional analog techniques. However, a regretful aspect is that it is often difficult to catch up with the latest advancements for proper referencing and follow-up of digital technologies since the CAD/CAM device and material are developing very rapidly. Accordingly, although it is ideal to have hands-on experiences in various digital material and devices, and adapt to their fast changes, it must be stressed that the clinical application is to be implemented on the basis of the proven traditional way of dental clinics in order to obtain better outcomes. This presentation will explore types of approaches that can be made by combining the traditional techniques and the CAD/CAM from the aesthetic viewpoint. In addition, it is hoped and eagerly awaited that the CAD/CAM restoration may play a significant role in the field of the 'digital art'.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.153-158
• /
• 2004

Preformed stainless steel crown is an useful restorative material for the treatment of badly broken down primary teeth. However iatrogenic damage to adjacent teeth might occur during the process of tooth reduction. Such damages might lead to plaque accumulation and increase the risks of caries initiation. Especially the damage can make a problem in the first permanent molar. Purpose of this study was to investigate an iatrogenic damage to the first permanent molar during preparation of second primary molar for preformed stainless steel crown. Twelve children restored with preformed stainless steel crown to second primary molar were selected. Contact areas were separated with separation elastics, and tooth surfaces were cleaned. After taking negative impression using vinylpolysiloxane impression material, the specimens were examined by scanning electron microscope for the detection of iatrogenic damage. The prevalence of iatrogenic damage was 66.7% and variable appearances and So we can suggest that when preparing teeth for preformed stainless steel crown, we should be careful about adjacent teeth not to make an iatrogenic damage.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.37-41
• /
• 1968

The purpose of this paper is to evaluate the number of occlusal contacts in centric occlusion. The 50 strictly selected subjects, who have good natural dentition and occlusion, were impressioned with Alginate Impression material, and dental stone models were madel. After transfering the models from mouth to Hanau Articulator Model H2 by means of SM type Face-Bow, condylar guidances were registered, red articulating papers($13{\mu}$ in thickness) were inserted between upper and lower posterior teeth, and the red marked points and lines were counted as occlusal contact points. 1. The number of occlusal contact points in centric occlusion were 1st Molars 2nd Molars, 2nd Premolars and 1st Premolars in order. 2. The number of occlusal contact points of right side showed comparatively much more than those of left side. 3. The number of occlusal contact points of upper in Premolar area were much more than those of lower, and in Molar area were the reverse. 4. The total number of occlusal contact points in centric occlusion were approximately 105 points.

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.1-8
• /
• 2016

This study is focusing on Territoriality which is supposed to be one of the most important elements to activate open spaces in apartment communities. Case analysis with onsite visit is selected as the research method of this study targeting 6 apartment complexes in Bukgu and Gwangsangu, Gwangju city which accommodate over 500 households up to 800 households, which show high occupancy ratio and which were built after 2006 to minimize the physical environment variable. The result of this study is concluded as follows. First, we need the elements which can induce various action and the use of floor surface in color, pattern, and material should be considered in the stance of pedestrian for easy recognition of Territoriality change. Second, To secure the view, we should consider to plant shrubs or to plant trees wider apart. In most cases, enclosure is secured by using trees of Vertical Boundary for safety and comfort, but overuse in some cases make residents feel fear of enclosed spaces and insecurity. Third, Various and harmonious design elements can be recommended to increase aesthetic impression, to induce positive response for design, and to be used consistently. Finally, Unique space using notable landmark or design elements should be considered.

• Journal of Technologic Dentistry
• /
• v.33 no.3
• /
• pp.227-236
• /
• 2011

Purpose: The purpose of this study was to reduce the remake rate of dental prosthesis. We examined remake cause and major factor of dental prosthesis to determine methods for raising dental prosthesis satisfaction. Methods: Subjects included dental technicians in the metropolitan areas of the cities of Daegu and Gyeong-buk. Surveys were filled out by consenting dental technicians. Statistical analysis was done using SPSS version 19.0 for Windows. We determined frequencies and percentage, calculating means, and standard deviations, and determining statistical significance using t-tests, analysis of variance. Results: Impression or material transform is high among remake cause and margin is high among remake major factor. Crown class showed differences in General characteristics associated with age, number of employees, and number of connection dental. Porcelain class showed differences in General characteristics associated with age, number of employees, and number of connection dental. Denture class showed differences in General characteristics associated with age, monthly salaray, and career. Implant class showed differences in General characteristics associated with age, education, and career. Conclusion: In order to reduce remake rate of dental prosthesis, communication of dentist, dental technician, and the patient are require and correct information of patient and dental prosthesis are need.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.125-136
• /
• 1993

The geometrically standardized intraoral radiographs using 5 occlusal registration materials were taken serially from immediate, 1 day, 2, 4, 8, 12, and 16 weeks after making the bite blocks. And the resultant images were digitally subtracted using the immediately taken film as reference images. The qualities of those subtracted images were evaluated to check the degree of reproducibility of each impression material. The results were as follows: 1. The standard deviations of the grey scales of the overall subtracted images were 4.9 for Exal1ex, 7.2 for Pattern resin, 9.0 for Tooth Shade Acrylic, 12.2 for XCP only, 14.8 for Impregum. the lesser the standard deviation, the better the quality of the subtracted images. 2. The standard deviation of the grey scales of the overall subtracted images were grossly related to those of the localized horizontal line of interest. 3. Exaflex which showed the best subtracted image quality had 15 cases of straight, 14 cases of wave, 1 case of canyon shape. Impregum which showed the worst subtracted image quality had 4 cases of straight, 8 cases of wave, 18 cases of canyon shape respectively.