• 제목/요약/키워드: Impregnation method

검색결과 296건 처리시간 0.032초

각종 포유동물 갑상선내의 소포방세포에 관한 비교조직학적 연구 (Comparative Histological Study on the Parafollicular Cells of Mammals)

  • 고정식;박상윤
    • 한국동물학회지
    • /
    • 제23권2호
    • /
    • pp.89-108
    • /
    • 1980
  • 본 연구는 포유동물 갑상선내에 출현하는 PF cell의 형태학적 특징을 밝히기 위하여 사람을 비롯한 포유동물 5목 9종 (영장목, 사람; 우제목, 소, 돼지, 흑염소; 식육목, 개; 설치목, 흰쥐, 마우스, 다람쥐; 토끼목, 집토끼)을 재료로 하여 이 세포의 분포상태, 형태 및 염색성을 비교 관찰하여 다음과 같은 결과를 얻었다. 1. PF cell의 출현수는 종에 따라 유의한 차이를 보였으며, 단위면적당 출현수는 개에서 가장 많았으며, 그 다음이 흰쥐, 다람쥐, 마우스, 집토끼, 소, 돼지, 흑염소, 사람의 순서로 적었다. 2. PF cell의 갑상선내의 분포상태를 보면 소, 집토끼, 다람쥐 및 마우스의 경우는 선엽의 부위에 따라 유의한 차이를 보였으며 개, 사람, 돼지, 흑염소 및 흰쥐의 경우는 유의한 차이는 아니나 부위에 따라 다소 차이를 보였다. 개에서는 선엽전체에 걸쳐 비교적 고르게 분포하였고, 흰쥐의 것은 각 부위의 중심부에 모여 있었다. 흑염소와 다람쥐의 것은 후부에 더 많았다. 마우스와 집토끼의 것은 선엽의 중간부에 많이 출현하되 마우스의 것은 주로 중심부에, 집토끼의 것은 후외측부위에 더 많았다. 사람, 소 및 돼지의 것은 중상부와 후상부에 많이 분포하되 사람과 소의 것은 주로 중심부에 더 모여 있었으며 돼지의 것은 곳곳에 밀집되어 나타났다. 3. PF cell의 출현 위치관계를 보면 개의 경우는 대부분 소포사이에 위치하며 무리를 이루는 경우가 많았지만, 집토끼의 것은 소포내 또는 소포질과 소포사이의 결합조직내에 두루 분포하되 무리를 이루고 있는 것이 자주 관찰되었고, 사람, 소, 돼지, 흑염소, 흰쥐, 마우스 및 다람쥐의 경우는 대부분 소포내 또는 소포곁에 낱개로 산재하였다. 4. PF cell의 모습은 식육목인 개의 것만 구형 또는 난원형이고 기타 동물의 것들은 방추형, 원추형, 난원형, 구형 및 세포질 돌기를 가진 세장형등 매우 다양한 모습이었다. 5. 세포의 크기는 소, 개 및 돼지의 것이 다소 크고, 집토끼, 사람 및 흑염소의 것이 중등대였으며 흰쥐, 마우스 및 다람쥐의 것이 다소 작은 편이었다. 6. PF cell내에 함유되어 있는 분비과립의 양에 따른 형별 세포의 출현비율에서 볼때 다과립형 세포가 많은 동물은 돼지, 소, 개 및 다람쥐였고, 희과립형 세포가 많은 동물은 마우스, 흰쥐 및 사람이었다. 7. 은친화성 도은법에서는 모든 동물에서 양성 반응을 볼 수 없었으나, 기타 3가지 염색법에서는 종에 따라 차이는 보이나 모두 양성 반응을 보였다. 즉, 개, 소 및 돼지의 PF cell은 3가지 염색에서 모두 중등도 이상의 강한 양성 반응을 보였고, 흑염소의 것은 Grimelius 은호성 도은법과 HCl-toluidine blue법에서, 집토끼와 다람쥐의 것은 HCl-toluidine blue 법에서, 흰쥐의 것은 Grimelius 은호성 도은법과 HCl-lead hematoxylin법에서, 마우스의 것은 HCl-lead hematoxylin법과 HCl-toluidine blue법에서 중등도 이상의 양성반응을 보였으며, 사람의 것은 3가지 염색법에서 모두 약한 양성 반응만을 나타내었다. 8. 이상의 소견을 종합하면, PF cell의 분포 위치 및 형태등에 종간의 차이를 볼 수 있었다. 또 조직학적 식별을 위한 염색법에 있어서는 양성 반응도가 다르기 때문에 실험 목적에 따라 염색법을 선택하여야 할 것으로 사료된다.

  • PDF

인산형 연료전지용 기체확산전극의 백금촉매 담지방법에 따른 산소환원 특성 (Oxygen Reduction of PAFC Gas Diffusion Electrode with Various Pt Impregnation Methods)

  • 유덕영;은영찬;심중표;이주성
    • 공업화학
    • /
    • 제7권5호
    • /
    • pp.999-1005
    • /
    • 1996
  • Carbon 표면에 작용기를 도입하기 위해 산화처리한 후, $H^+$과 Pt 양이온을 교환시키는 이온교환법과 백금용액을 계면활성제가 들어있는 메탄올로 환원을 시켜 carbon에 백금을 담지하는 메탄올 환원법으로 촉매를 제조하여 이미 널리 쓰이고 있는 colloid 방법으로 제조한 촉매와 비교하였다. 메탄올 환원법에서 계면활성제는 carbon과 백금입자의 분산효과를 높이고, 안정한 백금 colloid 용액의 유지를 위해 첨가하였다. 각 담지방법에 의해 담지된 백금입자가 $30{\sim}50{\AA}$의 크기로 분산되어 담지된 것을 TEM과 XRD를 통해 확인하였고, 담지방법에 따른 백금의 담지율은 모두 100%에 가까웠고, 그 중 이온교환법의 담지율이 DCP 측정으로는 99.92%, 연소법으로는 99.87%였다. 각 촉매의 활성을 전기화학적으로 비교하기 위하여 산소환원전류밀도를 측정한 결과, 초기에는(60시간 이내) colloid 방법에 의해 제조된 촉매로 제작한 산소극이 0.7V(vs. RHE)에서 $460mA/cm^2$로 이온교환법, 메탄올 환원법에 의해 제조된 촉매보다 더 우수한 전극성능을 나타냈지만, 장시간(약 100시간 이후) 운전시에 전극성능 감소율은 colloid 방법으로 제조한 촉매로 제작한 전극이 가장 높게 증가하였으며, 메탄올 환원법으로 제조한 전극이 가장 안정된 특성을 보였다.

  • PDF

Effect of Template Existence on the Textural Properties of Iron-based Catalyst for Fischer Tropsch Reaction

  • Sirikulbodee, Papahtsara;Tungkamani, Sabaithip;Phongksorn, Monrudee;Ratana, Tanakorn;Sornchamni, Thana
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제7권2호
    • /
    • pp.96-104
    • /
    • 2015
  • Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

수전해용 공유가교 SPEEK 고분자 전해질 막의 전기 화학적 및 기계적 특성 (Electrochemical and Mechanical Characteristics of Covalently Cross-Linked SPEEK Polymer Electrolyte Membrane for Water Electrolysis)

  • 김경언;장인영;권오환;황용구;문상봉;강안수
    • 한국수소및신에너지학회논문집
    • /
    • 제18권4호
    • /
    • pp.391-398
    • /
    • 2007
  • The covalently cross-linked sulfonated polyetheretherketone (CL-SPEEK) membrane was prepared by four-step synthesis of sulfonation-sulfochlorination, partial reduction, lithiation, and cross-linking, and its electrochemical and mechanical properties were investigated for water electrolysis application. The prepared ion exchange membranes showed good electrochemical and mechanical properties; proton conductivity of 0.116 S/cm at $80^{\circ}C$, water uptake of 44.6%, ion exchange capacity of 1.75 meq/g-dry-memb., tensile strength of 64.25 MPa and elongation of 61.11%. The membrane electrode assembly (MEA) with homemade membranes were prepared by non-equilibrium impregnation-reduction (I-R) method. Especially, the electrochemical surface area (ESA) and roughness factor of CL-SPEEK electrolyte by cyclic voltammetry method were 23.46 $m^2/g$ and 307.3 $cm^2-Pt/cm^2$, respectively. The prepared MEA was used in the unit cell of water electrolysis and the cell voltage was 1.81 V at 1 A/$cm^2$ and $80^{\circ}C$, with platinum loadings of 1.31 mg/$cm^2$.

Ru/CeO2 촉매를 이용한 메탄 건식 개질 (Methane Dry Reforming over Ru/CeO2 catalysts)

  • 뉴옌 히엔;전미나;무하마드 리드완;리즈키 타마라니;윤창원
    • 한국수소및신에너지학회논문집
    • /
    • 제26권3호
    • /
    • pp.221-226
    • /
    • 2015
  • Ru catalysts supported on $CeO_2$ were synthesized by an impregnation method and characterized by numerous analytical techniques including X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), transmission electron microscopy (TEM), and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). Upon utilization of these catalysts for methane dry reforming with a $CH_4/CO_2$ ratio of 1:1 at different temperatures ranging from 550 to $750^{\circ}C$, the $Ru/CeO_2$ catalysts have shown to be active. In particular, Ru(0.55wt%) supported on $CeO_2$ (1) prepared by a hydrothermal method exhibited excellent activity with the conversion of > 75% at $750^{\circ}C$. In addition, the catalyst also proved to be highly stable for at least 47 h without catalyst deactivation under the dry reforming conditions.

고기능성 복합재료의 제조와 그 특성평가에 관한 연구 (A Study on the Preocessing of high Runctional Composites and the Evaluation of Its Characteristics)

  • 김윤해
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권2호
    • /
    • pp.139-145
    • /
    • 1998
  • Filament winding method is widely used for composite fabrications using low viscosity liquid for-mation and processing asymmetrical structures of pressure vessel pipe rocket motor case etc. The filament winding method is affected by several parameters such as pot life of process time viscosi-ty of resin filament winding temperature and schedules curing condition and post curing condi-tion of resin. To develope high functional composite materials the rotation(5, 15, 20, 30rpm) of the winding machine was controlled by D.C motor. And the wiper to give proper tension was equipped between strand and resin bath. The resin is hooked by the design wiper. The adequate cure schedule was found by DSC. NOL ring test is carried out to investigate the basic physical properties such as design technology. The void contents in filament winding is generally higher than that of the prepreg laminated plate. These high contents of void can make a crack in resin in spite of low deformation. These problem was solved by giving tension in processing. To improve the characteristics of fiber volume fraction void contents resin/fiber bonding the winding speedc is changed under constant tension. It was found that resin impregnation was not different from in fiber contents void contents at the range of 0.5~1kg tension but it was found that resin was not impregnated at the above of 1.5kg tension. In burst test a pure PE liner was failed at a nozzle part under the $14kg/\textrm{cm}^2$ pressure but a pressure vessel of CNG was failed at a cylinder part under the $200kg/\textrm{cm}^2$ pressure.

  • PDF

연료전지용 다공성전극에 있어서 백금촉매의 분산성개선 (Improvement of Platinum Particle Dispersion on Porous Electrode for Phosphoric Acid Fuel Cell)

  • 박정일;김조웅;이주성
    • 공업화학
    • /
    • 제1권2호
    • /
    • pp.224-231
    • /
    • 1990
  • 백금촉매의 분산을 향상시키기 위하여 카본블랙의 표면처리, 용매, 계면활성제 및 초음파분산기에 따른 효과를 고찰하였다. 카본블랙을 산화처리하여 카본블랙 표면에 친수성기인 작용기들을 도입함으로써 작용기들이 염화백금산 이온의 anchorage center역할을 하여 이 염화백금산을 환원시킬 때 백금입자(이온)의 이동이나 성장을 억제시켜 미립화 시킬 수 있다고 생각되었다. 혼합용매, 계면활성제, 초음파분산기 등을 이용한 경우, 염화 백금산이온이 anchorage center 역할을 하고 있는 작용기들에 까지 잘 스며들어감으로써 백금촉매의 분산성이 향상됨을 알았다. 혼합용매에 초음파분산기를 사용하여 공기산화시킨 카본블랙에 백금촉매를 담지시킨 결과, 분산성이 가장 우수하였으며 입자크기는 $30A^{\circ}$ 이하로 미립화 되었다.

  • PDF

알칼리형 연료전지용 산소극의 전기화학적 특성고찰 -콜로이드 방법에 의한 카본블랙상 은촉매담지- (Electrochemical Characteristics of the Oxygen Electrode for Alkaline Fuel Cells -Impregnation of Silver Catalyst on Carbon Black with Colloidal Method-)

  • 이홍기;이주성
    • 공업화학
    • /
    • 제3권4호
    • /
    • pp.701-709
    • /
    • 1992
  • 콜로이드 방법에 의해 은입자를 카본블랙에 담지시켜 알칼리형 연료전지의 산소극의 촉매로 사용하였다. $AgNO_3$$NaBH_4$의 혼합용액에 sodium dodecyl benzenesulfonate를 첨가하여 콜로이드 용액을 만들었고 이를 전기영동법으로 확인하였다. 입자크기에 대한 전극성능의 영향과 화학흡착을 고찰한 결과 $200{\AA}$의 촉매로 제조한 전극이 가장 우수하였으므로 이를 위해 계면활성제의 첨가효과, 담지시의 교반시간과 담체로 사용되는 카본의 분산성에 따른 은입자의 응집현상을 검토하였다. 열처리 효과에 의한 입자 크기의 증가를 고려할 때 계면활성제의 첨가량을 $10mg/{\ell}$으로 하고 9시간 교반하여 $100{\AA}$의 입자크기를 갖는 촉매를 제조한 뒤 이를 이용하여 전극을 제작하는 것이 가장 좋았다. 또한 카본블랙을 초음파 분산기로 분산시키는 경우 30초 이후에는 재응집현상이 일어남을 알 수 있었다.

  • PDF

아민 처리가 탄소나노튜브의 이산화탄소 흡착거동에 미치는 영향 (Influence of Amine Surface Treatment on Carbon Dioxide Adsorption Behaviors of Activated Carbon Nanotubes)

  • 장동일;조기숙;박수진
    • 공업화학
    • /
    • 제20권6호
    • /
    • pp.658-662
    • /
    • 2009
  • 본 연구에서는 탄소나노튜브를 KOH를 이용하여 활성화 한 후 이를 아민으로 표면처리한 탄소나노튜브의 이산화탄소 흡착거동에 관하여 고찰하였다. 아민 처리한 탄소나노튜브의 물리화학적 특성은 X-ray photoelectron spectroscopy (XPS), $N_2$ adsorption isotherm, thermogravimetric analysis (TGA), 그리고 temperature programmed desorption (TPD)을 이용하여 분석하였다. 실험 결과, 활성화된 탄소나노튜브 표면의 아미노 관능기는 산성가스인 이산화탄소를 선택적으로 흡착하기 위한 염기성 자리로서 작용하였다. 상온에서의 이산화탄소 흡착량은 미처리된 탄소나노튜브가 가장 크게 나타났으나 온도가 증가할수록 급격한 감소를 나타내었으며 PEHA 처리한 경우 완만한 흡착거동을 보였다. 이는 탄소표면의 아미노 관능기와 이산화탄소 사이의 상호작용 때문이라 판단된다.

후막 센서 어레이를 이용한 화학 작용제 분류 (Classification of Chemical Warfare Agents Using Thick Film Gas Sensor Array)

  • 곽준혁;최낙진;반태현;임연태;김재창;허증수;이덕동
    • 한국군사과학기술학회지
    • /
    • 제7권2호
    • /
    • pp.81-87
    • /
    • 2004
  • Semiconductor thick film gas sensors based on tin oxide are fabricated and their gas response characteristics are examined for four simulant gases of chemical warfare agent (CWA)s. The sensing materials are prepared in three different sets. 1) The Pt or Pd $(1,\;2,\;3\;wt.\%)$ as catalyst is impregnated in the base material of $SnO_2$ by impregnation method.2) $Al_2O_3\;(0,\;4,\;12,\;20\;wt.\%),\;In_2O_3\;(1,\;2,\;3\;wt.\%),\;WO_3\;(1,\;2,\;3\;wt.\%),\;TiO_2\;(3,\;5,\;10\;wt.\%)$ or $SiO_2\;(3,\;5,\;10\;wt.\%)$ is added to $SnO_2$ by physical ball milling process. 3) ZnO $(1,\;2,\;3,\;4,\;5\;wt.\%)$ or $ZrO_2\;(1,\;3,\;5\;wt.\%)$ is added to $SnO_2$ by co-precipitation method. Surface morphology, particle size, and specific surface area of fabricated sensing films are performed by the SEM, XRD and BET respectively. Response characteristics are examined for simulant gases with temperature in the range 200 to $400^{\circ}C$, with different gas concentrations. These sensors have high sensitivities more than $50\%$ at 500ppb concentration for test gases and also have shown good repetition tests. Four sensing materials are selected with good sensitivity and stability and are fabricated as a sensor array A sensor array Identities among the four simulant gases through the principal component analysis (PCA). High sensitivity is acquired by using the semiconductor thick film gas sensors and four CWA gases are classified by using a sensor array through PCA.