• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1780-1790
• /
• 2018

Voltage feed-forward control (VFFC) is widely used in LCL-type grid-tied inverters due to its advantages in terms of disturbance rejection performance and fast dynamic response. However, VFFC may worsen the stability of inverters under weak grid conditions. It is revealed in this paper that a large phase-lag in the low-frequency range is introduced by VFFC, which reduces the phase margin significantly and leads to instability. To address this problem, a novel virtual-impedance-based control, where a phase-lead is introduced into the low-frequency area to compensate for the phase lag caused by VFFC, is proposed to improve system stability. The proposed control is realized with a high-pass filter, without high-order-derivative components. It features easy implementation and good noise immunity. A detailed design procedure for the virtual impedance control is presented. Both theoretical analysis and experimental results verify the effectiveness of the control proposed.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.41-48
• /
• 2018

This paper describes the systems engineering development process for the Departure from Nucleate Boiling Ratio (DNBR) algorithm using FPGA. Current Core Protection Calculator System (CPCS) requirement and DNBR logic are analyzed in the reverse engineering phase and the new FPGA based DNBR algorithm is designed in the re-engineering phase. FPGA based DNBR algorithm is developed by VHSIC Hardware Description Language (VHDL) in the implementation phase and VHDL DNBR software is verified in the software Verification & Validation phase. Test cases are developed to perform the software module test for VHDL software modules. The APR 1400 simulator is used to collect the inputs data in 100%, 75%, and 50% reactor power condition. Test input signals are injected to the software modules following test case tables and output signals are compared with the expected test value. Minimum DNBR value from developed DNBR algorithm is validated by KEPCO E&C CPCS development facility. This paper summarizes the process to develop the FPGA-based DNBR calculation algorithm using systems engineering approach.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 춘계학술발표대회
• /
• pp.8-10
• /
• 2023

삼킴장애는 음식물이 입에서 식도로 가지않고 걸리거나 기도(Trachea)로 흡입되는 문제를 갖는 상태이다. 특히 노인이나 신경계 질환을 앓는 환자의 경우 기도로 흡입된 음식덩이가 폐렴을 일으키고 결국에는 사망으로 이어지기에 적절한 치료와 관리가 요구된다. 보통 영상으로 판단할 수 있는 삼킴단계는 구강준비단계(Oral Preparatory Phase), 구강단계(Oral Phase), 인두단계(Pharyngeal Phase), 식도단계(Esophageal Phase) 4가지로 분류하고 삼킴장애는 침습(Penetration)과 흡인(Aspiration)으로 크게 2가지로 분류한다. 본 논문에서는 이러한 6가지 클래스를 가지는 삼킴장애 환자 비디오 파일을 라벨링하기 위한 웹 애플리케이션을 제안한다. 이를 구현하기 위해서 대용량 멀티프레임 이미지를 수신해서 분리하여 저장하도록 개발하였다. 또한 음식덩이를 정교하게 분할할 수 있도록 GrabCut 알고리즘을 적용하여 라벨링할 수 있도록 하였다. 차후 라벨러와 전문의 간의 협업이 가능하도록 라벨링 데이터의 상태를 관리할 수 있도록 개발하고자 한다.

• 한국정보통신학회논문지
• /
• 제17권7호
• /
• pp.1538-1543
• /
• 2013

평면형 마이크로스트립 공진기를 이용한 고주파 발진기의 단점인 위상잡음 특성을 개선하기 위해 본 논문에서는 분리형 링 공진기를 제안하였다. 제안된 공진기를 이용하여 위상잡음 특성 개선 효과를 나타내기 위해 발진기를 설계하여, 5.8GHz 기본 주파수에서 7.22dBm의 출력과 -83.5 dBc@100kHz의 위상잡음 특성을 나타내었다. 이것은 ${\lambda}/4$ 마이크로스트립 공진기를 이용한 발진기와 비교하여 위상잡음 특성이 9.7dB 정도 개선되었다. 다음은 제안된 공진기에 버랙터다이오드를 추가하여 전압제어발진기를 구현하였다. 발진기의 특성은 최소 5.833 GHz에서 최대 5.845 GHz 까지 125 MHz 정도의 튜닝범위를 가지고, -118~-115.5 dBc/Hz@100 KHz의 위상잡음 특성을 갖는다. 본 논문의 발진기는 평면형 구조로 쉬운 작업공정과 소형화 특성 때문에 MIC 또는 MMIC 분야의 설계에 응용될 수 있을 것이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.95-97
• /
• 2018

The power quality of Single Phase Grid-Connected Inverters (GCIs) has received much attention with the increasing number of Distributed Generation (DG) systems. However, the performance of single phase GCIs get degraded due to several factors such as the grid voltage harmonics, the dead time effect, and the turn ON/OFF of the switches, which causes the harmonics at the output of GCIs. Therefore, it is not easy to satisfy the harmonic standards such as IEEE 519 and P1547 without the help of harmonic compensator. To meet the harmonic standards a certain kind of harmonic controller needs to be added to the current control loop to effectively mitigate the low order harmonics. In this paper, the harmonic compensation is performed using a novel robust harmonic compensation method based on Digital Lock-in Amplifier (DLA). In the proposed technique, DLAs are used to extract the amplitude and phase information of the harmonics from the output current and compensate it by using a simple PI controller in the feedforward manner. In order to show the superior performance of the proposed harmonic compensation technique, it is compared with those of conventional harmonic compensation methods in terms of the effectiveness of harmonic elimination, complexity, and implementation. The validity of the proposed harmonic compensation techniques for the single phase GCIs is verified through the experimental results with a 5kW single phase GCI. Index Terms -Single Phase Grid Connected Inverter (SPGCI), Harmonic Compensation Method, Total Harmonic Distortion (THD) and Harmonic Standard.

• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.284-295
• /
• 2012

본 연구는 간호의 질을 향상시키기 위해 간호사를 위한 환자안전보고촉진전략을 개발하고 평가하기 위한 것으로, 구축-실행-평가단계로 진행하였다. 구축단계는 분석과 검증의 하위단계로 구성되는데, 분석단계에서는 문헌고찰과 현장연구의 단계로 구성되고, 검증의 단계는 두 명의 전문가에 의해 평가받는 과정을 거쳤다. 이 단계를 통해 환자안전보고시스템, 교육자료, 홍보계획, 보상으로 구성된 환자안전보고촉진전략을 개발하였다. 실행단계에서는 구축단계에서 개발된 내용을 일개 병원에서 근무 중인 간호사 51명을 대상으로 12주간의 중재 후, 활용 후 만족도, 스트레스인식, 업무성과정도를 전-후 점수를 비교하여 살펴보았다. 본 연구의 설계는 단일군 전후설계를 적용하였고 서술통계 및 paired t-test 를 SPSS WIN 18.0을 활용하여 분석하였다. 중재 후 업무성과는 3.62점에서 3.75점으로 유의하게 향상시켰다(t=2.653, p=.009). 반면 환자안전보고촉진전략의 활용이 대상자들의 직무 스트레스를 증가시킬 것이라는 가정 하에 중재 전-후 점수를 비교한 결과 중재 전 3.06점에서 중재 후 3.13으로 약간 증가하였으나 통계적으로 유의한 변화를 보이지 않았다(t=.785, p=.434). 따라서 본 연구에서 개발한 전략은 많은 임상환경에 적용할 수 있을 것이고 간호사를 위한 환자안전보고를 촉진하는데 도움을 줄 수 있는 프로그램이라 사료된다.

• 한국전자거래학회지
• /
• 제4권3호
• /
• pp.139-158
• /
• 1999

In this paper we present the development of CITIS(Contractor Integrated Technical Information Service) reference model system which can be utilized for electronic commerce among enterprises. For the physical analysis target model, we selected switching system businesses of Korea Telecom. From analysis of life-cycle business process and data, we derived CITIS reference model containing CITIS To-Be model and CITIS scenario. Derived CITIS reference model is generalized so that it can be used not only for switching system businesses but other business areas regarding CITIS implementation. On the base of the derived CITIS reference model, We also developed CITIS information management system and CITIS-support workflow system as CITIS reference model system. Developed CITIS reference model system supports information and business process sharing among enterprises on internet and it does make a contribution to expansion of CITIS which is moving from conceptual research towards real implementation phase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.378-381
• /
• 1991

In this paper, the active noise controll system in duct is analyzed with real time implementation. The primary noise signal detected by microphone is modeled using adaptive algorithm and the secondary signal which has the same amplitude and $180^{\circ}$ phase shift with the primary noise signal is generated in the controller. The signal processor DSP56001 is used to implement the real-time controller and the experimental results shows that our system can reduce the noise level in duct to $20{\sim}40$ [db].

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.819-822
• /
• 1998

A new active power filter (APF) circuit with a current compesation estimation method is proposed. The current compensation estimation method replaces a current sensor with an estimating circuit and therefore reduces the implementation cost In addition, a simple control scheme, based on the energy balance concept, is adopted to control the voltage of a DC capacitor. Therefore energy change in the DC capacitor can be compensanted in the next cycle. Since a sampling technique is used, a larger DC capacitor voltage ripple can be permissible and a relatively smaller DC capacitor can be used. The proposed method has advantages of the reduction of one current sensor, low implementation cost, and fast transient responses. The theoretical analysis and simulation results are given. The proposed control method is successfully verified by computer simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.465-467
• /
• 2004

Finite element analysis of welding processes, which entail phase evolution, heat transfer and deformation, is considered in this paper. Attention focuses on numerical implementation of the thermo-elastic-plastic constitutive equation proposed by Leblond et al in consideration of the transformation plasticity. Based upon the multiplicative decomposition of deformation gradient, hyperelastic formulation is employed for efficient numerical integration, and the algorithmic consistent moduli for elastic-plastic deformations including transformation plasticity are obtained in the closed form. The convergence behavior of the present implementation is demonstrated via a couple of numerical examples. Several locking phenomena removed by Solid-shell element.