• 구강회복응용과학지
• /
• 제29권4호
• /
• pp.317-326
• /
• 2013

임플란트-지지 고정성 보철물의 누적 생존율을 구하고, 생존율에 영향을 미치는 요소와 요소 간 상관관계를 평가하여, 임플란트-지지 고정성 보철물의 예후를 예측하는 데 도움을 주고자 한다. 2000년에서 2007년까지 부산대학교 치과병원에 내원한 환자 중 임플란트를 식립하고 임플란트-지지 고정성 보철물을 제작한 환자를 대상으로 임플란트-지지 고정성 보철물과 관련한 종합적인 임상적 상태를 조사 평가하여 다음과 같은 결과를 얻었다. 1. 전체 임플란트-지지 고정성 보철물의 추정 수명은 11.7년이었고, 고정성 보철물에 문제가 발생되는 추정 시점은 9.5년이었다. 2. 나이와 성별에 따른 수명의 차이는 나타나지 않았다(P>.05). 3. 치아 발거 원인은 임플란트-지지 고정성 보철물의 수명에 영향을 미쳤다(P<.05). 치아 우식증의 경우 고정성 보철물의 수명은 10.0년, 치주 질환의 경우 9.0년이었다. 4. 악골에 따른 수명의 차이는 나타나지 않았으나(P>.05), 전후방 위치에서는 소구치부 보철물의 수명이 11.0년으로 수명이 길었고, 대구치 부위 보철물의 수명이 8.8년으로 짧았다(P<.05). 5. 임플란트-지지 고정성 보철물의 크기는 보철물의 수명에 영향을 미치지 않았다(P>.05). 6. 대합치 조건별 임플란트-지지 고정성 보철물의 수명은 차이가 없었다(P>.05). 7. 임플란트-지지 고정성 보철물의 합병증은 식편 압입(40.5%), 도재 파절(25.8%), 나사 풀림(23.6%) 순이었다. 식편 압입은 임플란트 위치와 상관관계를 보였고, 나사와 관련된 문제는 임플란트 위치와 보철물 종류에 영향을 받았다(P>.05).

• 대한치과의사협회지
• /
• 제51권5호
• /
• pp.242-249
• /
• 2013

The proper occlusal design is one of the most important factors for the long-term success. The purpose of this research is to investigate and define occlusal considerations to reduce failure of implant-supported fixed prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occulsal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success can be assured by reducing early occulsal loading to avoid implant overloading and selecting appropriate occlusion material.

• 대한치과의사협회지
• /
• 제55권12호
• /
• pp.842-849
• /
• 2017

The term, 'crossed occlusion' implies clinical situation in which the residual teeth in one arch have no contact with those in the antagonistic arch, resulting in the collapse of occlusal vertical dimension. The treatment goal of this pathologic condition is restoration of the collapsed vertical dimension and stabilization of abnormal mandibular position. Previously, konus removable prostheses or tooth supported overdentures were suggested to solve crossed occlusion. Nowadays, dental implants have been used for definitive support to solve this problem. In this case report, a 65 years old female patient had a crossed occlusion, in which the maxillary posterior residual teeth and mandibular anterior residual teeth cross. Interim removable and fixed dental prostheses were used to confirm the proper vertical and horizontal jaw relation. After that, the mandibular posterior edentulous region was restored with implant-supported fixed dental prostheses. Computer tomography guided implant surgery was performed according to the concept of the restoration-driven implant placement. The maxillary anterior edentulous region was restored with Kennedy class IV removable prosthesis, considering the patient's economic status. The patient's jaw position and prostheses have been well maintained at the follow-up after 6 months of definitive restoration. The antero-posterior crossed occlusion problems appeared to be effectively solved with the combination of removable in one arch and implant-supported fixed prostheses in the other.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.498-510
• /
• 2005

Purpose: The purpose of this study was to compare the maximum occlusal force implant prostheses to natural teeth. Material and Method: Fifty nine patients treated either with $Br{\aa}anemark$ implants and ITI implants during the recent ten years were involved in this study. The maximum occlusal force were measured with unilateral bite force recorder and dental prescale system. Results: 1. The maximum occlusal forces of the implant prostheses and natural teeth were not significantly different where measured with unilateral bite force recorder and dental prescale system. 2. The maximum occlusal forces were not significantly different between $Br{\aa}nemark$ implant and ITI implant prostheses. 3. The maximum occlusal forces of the implant prostheses had lower when compared with natural teeth during 1-6 months functional periods when measured with the unilareral bite force recorder(P<0.05) and 1-12 months functional periods when measured with the dental prescale system(P<0.05). After these periods there was not statistical significant difference between the implant prostheses and natural teeth. 4. The maximum occlusal forces of the wide diameter implant prostheses were higher than the maximum occlusal forces of the regular diameter implant prostheses when measured with dental prescale system(P<0.05), but there was no significant difference between the wide diameter and the regular diameter implant prostheses when measured with unilateral bite force recorder. 5. The maximum occlusal forces of the single implant prostheses were not significantly different with the splinting implants prostheses. 6. The maximum occlusal forces of the implant prostheses were not significantly different by age and sex. 7. There was significantly different between maximum occlusal forces measured with unilateral bite force recorder and dental prescale system(P<0.0001) but there was positive correlation(r=0.52. P<0.05). Conclusion: The maximum occlusal forces of the implant prostheses were not significantly different to natural teeth during clenching and unilateral maximum biting.

• Journal of Periodontal and Implant Science
• /
• 제43권2호
• /
• pp.51-57
• /
• 2013

Implant treatment has become the treatment of choice to replace missing teeth in partially edentulous areas. Dental implants present different biological and biomechanical characteristics than natural teeth. Occlusion is considered to be one of the most important factors contributing to implant success. Most literature on implant occlusal concepts is based on expert opinion, anecdotal experiences, in vitro and animal studies, and only limited clinical research. Furthermore, scientific literature regarding implant occlusion, particularly in implant-supported fixed dental prostheses remains controversial. In this study, the current status of implant occlusion was reviewed and discussed. Further randomized clinical research to investigate the correlation between implant occlusion, the implant success rate, and its risk factors is warranted to determine best clinical practices.

• 대한치과보철학회지
• /
• 제60권2호
• /
• pp.211-221
• /
• 2022

완전 무치악 악궁을 수복함에 있어 해부학적인 한계 또는 경제적인 제한이 있거나 환자가 광범위한 수술을 원하지 않을 경우에 임플란트 식립이 제한될 수 있다. 이러한 경우 전악 임플란트 고정성 보철물의 대안으로 임플란트 보조 국소의치를 이용할 수 있다. 본 증례는 치주질환으로 다수 치아를 발거하여 상악 완전 무치악과 하악 부분 무치악이 된 56세 여성 환자에서 상악 전방부에 4개의 임플란트를 식립하여 8본 서베이드 보철물과 임플란트 보조 국소의치로 수복하였고, 하악은 전치부 8본 고정성 가공 의치 및 구치부 임플란트 고정성 보철물로 수복하였다. 9년 간의 경과 관찰 시 심미적, 기능적으로 적절한 결과를 얻었기에 이를 보고하고자 한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제49권5호
• /
• pp.278-286
• /
• 2023

Objectives: This review assessed the performance of implant-supported fixed hybrid prostheses in 21 patients who received a total of 137 implants between 2003 and 2010. The implants were evaluated for marginal bone resorption, complications, success rate, and survival rate based on their vertical angularity, type of bone graft, and measured implant stability. Materials and Methods: One-way ANOVA and chi-square tests were used to analyze the relationships among long-term evaluation factors and these variables. The mean initial bone resorption in the implant group with a vertical angle of more than 20° was 0.33 mm and mean final bone resorption was 0.76 mm. In contrast, the mean initial bone resorption in the implant group with a vertical angle of less than 10° was 1.19 mm and mean final bone resorption was 2.17 mm. Results: The results showed that mean bone resorption decreased with an increase in the vertical placement angle of the implants used in fixed hybrid prostheses, as well as in the group without additional bone grafts and those with high implant stability. The success rate of implants placed after bone grafting was found to be higher than those placed simultaneously. Conclusion: These results suggest that implant-supported fixed hybrid prostheses may be an effective treatment option for edentulous patients, and intentionally placing implants with high angularity may improve outcomes.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.591-601
• /
• 2008

STATEMENT OF PROBLEM: The improvement in oral function and comfort from the dental implant appears to depend on the particular type of implant support used with the denture. The number and positioning of implants have an influence on the force transfer and subsequent stress distribution around implants. Nevertheless, a quantitative comparison has not been made between the types of implant prosthesis used with different materials compared to conventional complete denture. PURPOSE: The objective of this study is to assess the masticatory performance, bite force and impact of two different type of implant supported prostheses on oral health-related quality of life compared to conventional complete denture with GOHAI, validated oral-specific health status measures, the sieving method, and the Prescale Dental System. MATERIAL AND METHODS: From the years 1999 to 2006, a total of 30 completely edentulous patients in a single arch were selected from the Yonsei University Dental Hospital, Department of Prosthodontics and Implant Clinic in Seoul, S. Korea. Patients were divided into 3 groups of 10 each. Group HR was restored with fixed-detachable hybrid prostheses with resin teeth. Group FP had fixed dentures with porcelain teeth while Group CD had a complete denture. The masticatory performance was compared between 3 groups. RESULTS: The results showed a significant improvement in oral health-related quality of life with dental implants compared to a conventional denture in GOHAI comparison. Overall, implant prostheses showed a higher masticatory performance ($S_{50}$) and maximum bite force compared with conventional dentures (P < .05) but no differences between different implant supported prostheses (P > .05). CONCLUSION: Within the limitation of this study, the numbers of implant and material of implant prostheses does not appear to impact patient satisfaction, masticatory performance or bite force.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.346-359
• /
• 2022

PURPOSE. Four and six implant-supported fixed full-arch prostheses with various framework materials were assessed under different loading conditions. MATERIALS AND METHODS. In the edentulous maxilla, the implants were positioned in a configuration of four to six implant modalities. CoCr, Ti, ZrO₂, and PEEK materials were used to produce the prosthetic structure. Using finite element stress analysis, the first molar was subjected to a 200 N axial and 45° oblique force. Stresses were measured on the bone, implants, abutment screw, abutment, and prosthetic screw. The Von Mises, maximum, and minimum principal stress values were calculated and compared. RESULTS. The maximum and minimum principal stresses in bone were determined as CoCr < ZrO₂ < Ti < PEEK. The Von Mises stresses on the implant, implant screw, abutment, and prosthetic screws were determined as CoCr < ZrO₂ < Ti < PEEK. The highest Von Mises stress was 9584.4 Mpa in PEEK material on the prosthetic screw under 4 implant-oblique loading. The highest maximum principal stress value in bone was found to be 120.89 Mpa, for PEEK in 4 implant-oblique loading. CONCLUSION. For four and six implant-supported structures, and depending on the loading condition, the system accumulated different stresses. The distribution of stress was reduced in materials with a high elastic modulus. When choosing materials for implant-supported fixed prostheses, it is essential to consider both the number of implants and the mechanical and physical attributes of the framework material.

• 대한치과보철학회지
• /
• 제60권1호
• /
• pp.100-109
• /
• 2022

임플란트를 이용한 수복 치료에서 장기적인 안정을 얻기 위해서는 임플란트의 식립 시 보철 수복에 이상적인 위치와 각도로 식립하는 것이 중요하다. 이를 위해서는 정확한 치료계획에 따른 수술과 보철 치료가 이루어져야 한다. 본 증례에서는 캐드캠 기술을 이용해 수술 계획 수립, 고정성 임시 보철물 및 최종 보철물 제작을 진행하였다. 최종 보철물을 고려하여 제작한 수술용 가이드로 임플란트를 식립하였다. 임시 의치가 가진 환자의 심미적 정보를 고정성 임시 보철물과 최종 보철물의 제작에 활용하였다. 최종적으로 단일구조 지르코니아를 이용한 전악 임플란트 고정성 보철 수복으로 기능 및 심미적으로 환자가 만족할만한 결과를 얻을 수 있었다.