• 제목/요약/키워드: Impedance Polygon

검색결과 4건 처리시간 0.018초

Heuristic Physical Theory of Diffraction for Impedance Polygon

  • Lee, Keunhwa;Park, Sanghyun;Kim, Kookhyun;Seong, Woojae
    • International Journal of Ocean System Engineering
    • /
    • 제3권1호
    • /
    • pp.22-32
    • /
    • 2013
  • A heuristic physical theory of diffraction (PTD) for an acoustic impedance wedge is proposed. This method is based on Ufimtsev's three-dimensional PTD, which is derived for an acoustic soft or hard wedge. We modify the original PTD according to the process of physical optics (or the Kirchhoff approximation) to obtain a 3D heuristic diffraction model for an impedance wedge. In principle, our result is equivalent to Luebbers' model presented in electromagnetism. Moreover, our approach provides a useful insight into the theoretical basis of the existing heuristic diffraction methods. The derived heuristic PTD is applied to an arbitrary impedance polygon, and a simple PTD formula is derived as a supplement to the physical optics formula.

병렬로 시공된 수직 접지전극의 합성접지임피던스의 주파수의존성 분석 (An Analysis of the Frequency-Dependent Resultant Ground Impedance of Vertical Ground Electrodes Installed in Parallel)

  • 이복희;조성철;성창훈
    • 조명전기설비학회논문지
    • /
    • 제26권2호
    • /
    • pp.99-105
    • /
    • 2012
  • This paper deals with the experimental results of the frequency-dependent resultant ground impedance of vertical ground electrodes installed with a regular n-polygon. In order to propose an effective method of installing the vertically-driven multiple ground electrodes used to obtain the low ground impedance, the resultant ground impedance of ground electrodes installed with a regular n-polygon were measured as functions of the number of ground electrodes and the frequency of test currents and the results were discussed based on the potential interferences among ground electrodes. As a consequence, the effect of potential interference on the resultant ground impedance of vertical ground electrodes is frequency-dependent and it is significant in the low frequency of a few hundreds [Hz]. The resultant ground impedance of multiple vertical ground electrodes is not decreased in linearly proportion to the number of ground electrodes due to the overlapped potential interferences. Also the distributed-parameter circuit model considering the potential interference, the frequency-dependent relative permittivity and resistivity of soil was proposed. The simulated results of the frequency-dependent resultant ground impedance of multiple vertical ground electrodes are in good agreement with the measured data.

4족 보행 로봇의 걸음새 안정화를 위한 몸체 임피던스 제어 (Body Impedance Control for Walking Stabilization of a Quadrupedal Robot)

  • 이수영;홍예선
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제49권5호
    • /
    • pp.257-263
    • /
    • 2000
  • One of the basic assumptions in the static gait design for a walking robot is that the weight of leg should be negligible compared to that of body, so that the total gravity center is not affected by swing of a leg. Based on the ideal assumption of zero leg-weight, conventional static gait has been simply designed for the gravity center of body to be inside the support polygon, consisting of each support leg's tip position. In case that the weight of leg is relatively heavy, however, while the gravity center of body is kept inside the support polygon, the total gravity center of walking robot can be out of the polygon due to weight of a swinging leg, which causes instability in walking. Thus, it is necessary in the static gait design of a real robot a compensation scheme for the fluctuation in the gravity center. In this paper, a body impedance control is proposed to obtain the total gravity center based on foot forces measured from load cells of a real walking robot and to adjust its position to track the pre-designed trajectory of the corresponding ideal robot's body center. Therefore, the walking stability is secured even in case that the weight of leg has serious influence on the total gravity center of robot.

  • PDF

병렬 오픈 스터브가 연결된 전송선로를 이용한 전력분배기 (Power Divider using Shunt Open-Stub Loaded Transmission Line)

  • 권상근;김영;윤영철
    • 한국항행학회논문지
    • /
    • 제15권5호
    • /
    • pp.774-780
    • /
    • 2011
  • 본 논문은 저속파 특성을 갖고 있는 오픈 스터브가 연결된 전송선로를 이용하여 배글리(Bagley) 다각형과 지셀(Gysel) 분배기 설계를 제안한 것이다. 이러한 저속파 특성을 갖고 있는 구조는 짧은 길이의 전송선로와 병렬로 연결된 오픈 스터브의 캐패시턴스 때문에 특성 임피던스와 위상 속도의 감소 때문에 회로의 소자의 크기를 작게 구현할 수 있다. 이러한 특성을 확인하여 위하여 중심주파수 2.1 GHz에서 기존의 배글리 다각형과 지셀 분배기를 저속파 특성을 이용하여 분배기를 구현하였으며, 그 전기적 특성은 두 종류의 분배기가 동일하지만 저속파 특성을 이용한 분배기의 크기를 각각 15 % 이상 줄일 수 있음을 확인하였다.