• 한국전자파학회논문지
• /
• 제18권7호
• /
• pp.748-756
• /
• 2007

SIR(Stepped Impedance Resonator) 공진기로 구성된 대역 여파기는 특히 높은 주파수에서 fringing capacitance와 step 임피던스 불연속 영향으로 설계와 다른 왜곡된 주파수 응답을 가진다. 본 논문은 EM(Electromagnetic) 시뮬레이션을 통해 fringing capacitance와 step 임피던스 불연속 영향을 보상하는 절차를 보였다. 이 방법은 여파기에서 개별 공진기의 결합 전송선 및 결합 전송선을 연결하는 전송 선로를 체계적으로 조정하는 절차이며, 각 공진기 조정 후 제 결합하면 더 이상의 추가 조정을 요구하지 않는다. 또한, 본 방법의 타당성을 보이기 위하여 설계된 5단 SIR 여파기를 제작하여 EM 시뮬레이션 결과와 비교함으로써 방법의 타당성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1487_1488
• /
• 2009

In these days, the common grounding systems are adapted in most large structures. In order to evaluate the performance of grounding system, it is needed to measure ground impedance. Measuring methods of ground impedance for a large scale grounding systems have not been yet presented in detail. In this paper, we analyze earth mutual resistance and mutual coupling of $15{\times}15m$ grounding grid in different arrangements of auxiliary electrode. As a results, the auxiliary electrodes are installed where the error rate due to earth mutual resistance is less than 5%. Also, the potential lead is installed at obtuse angle from the current lead and the overlapped length between potential lead and grounding grid are minimized.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.294-304
• /
• 2017

This paper proposes a point of common coupling (PCC) voltage compensation method for islanding microgrids using an improved power sharing control scheme among distributed generators (DGs) without communication. The PCC voltage compensation algorithm is implemented in the droop control scheme to reduce the PCC voltage deviation produced by the droop controller itself and the voltage drop on the line impedance. The control scheme of each individual DG unit is designed to use only locally measured feedback variables and an obtained line impedance to calculate the PCC voltage. Therefore, traditional voltage measurement devices installed at the PCC as well as communication between the PCC and the DGs are not required. The proposed control scheme can maintain the PCC voltage amplitude within an allowed range even to some extent assuming inaccurate line impedance parameters. In addition, it can achieve proper power sharing in islanding microgrids. Experimental results obtained under accurate and inaccurate line impedances are presented to show the performance of the proposed control scheme in islanding microgrids.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.40-44
• /
• 2013

The contactless power transfer (CPT) systems have been recently gaining popularity widely since it is an available option to realize the power delivery and storage with connector-free devices across a large air gap. Especially, the CPT with electromagnetic resonance coupling method is possible to exchange energy within 2 m efficiently. However, the power transfer efficiency of CPT in commercialized products has been limited because the impedance matching of coupled coils is sensitive. As a reasonable approach, we combined the CPT system with HTS wire technology and called as, superconducting contactless power transfer (SUCPT) system. Since the superconducting coils have an enough current density, the superconducting antenna and receiver coils at CPT system have a merit to deliver and receive a mass amount of electric energy. In this paper, we present the feasibility of the SUCPT system and examine the transmission properties of SUCPT phenomenon between room temperature and very low temperature at 77 K as long as the receiver is within 1.0 m distance.

• 한국전자파학회논문지
• /
• 제26권5호
• /
• pp.463-470
• /
• 2015

본 논문은 SIR 구조의 피드라인과 공진기를 이용한 새로운 구조의 마이크로스트립 이중대역 대역통과여파기(BPF)를 제안한다. SIR 구조의 피드라인을 이용하여 이중대역 BPF의 두 통과대역 각각에서 입력과 출력 피드라인의 자기장 최대 지점을 서로 일치시켜 공진기와 피드라인 사이의 결합을 최대화하여 여파기 손실을 감소시켰다. 또한, 이중대역 BPF의 제1통과대역 공진기에도 SIR 구조를 적용하여 1) 두 통과대역 사이의 저지대역 특성을 개선시키고, 2) 제2통과대역 공진기와의 결합을 최소화시켜 공진기 간격을 감소시켜 소형화에 기여하였다. 이렇게 하여 이중대역 BPF 통과대역의 중심주파수와 대역폭을 독립적으로 변경시키는 것은 물론, 필터링 성능을 개선하였다. WLAN 규격을 만족하는 이중대역 BPF를 제작하고, 측정 결과와 비교하여 제안한 여파기 설계 방법이 유용하다는 것을 입증하였다.

• 소음진동
• /
• 제7권4호
• /
• pp.571-578
• /
• 1997

Recently, many general-purpose packages for fluid-structure interaction problems have been announced. However, they have a lot of limitations to model structures in the fluid-structure interaction problems reasonably. Utilizing general-purpose packages such as MSC/NASTRAN and SYSNOISE, in this paper, a method to slove the radiation scattering problems with some accuracy in the fluid-structure interaction problems was developed. Using a simple model, the results from the presented method here are compared with those from SYSNOISE. The result shows quite a good agreement between the two methods. The problems, which could not be solved by SYSNOISE, were tried to solve with the presented method and results were presented. It was proved that this method could be safely used to solve fluid-structure interaction problems.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.41-45
• /
• 2016

The technology of supplying the electric power by wireless power transfer (WPT) is expected for the next generation power feeding system since it can supply the power to portable devices without any connectors through large air gap. As such a technology based on strongly coupled electromagnetic resonators is possible to deliver the large power and recharge them seamlessly; it has been considered as a noble option to wireless power charging system in the various power applications. Recently, various HTS wires have now been manufactured for demonstrations of transmission cables, motors, MAGLEV, and other electrical power components. However, since the HTS magnets have a lower index n value intrinsically, they are required to be charged from external power system through leads or internal power system. The portable area is limited as well as the cryogen system is bulkier. Thus, we proposed a novel design of wireless power charging system for superconducting HTS magnet (WPC4SM) based on resonance coupling method. As the novel system makes possible a wireless power charging using copper resonance coupled coils, it enables to portable charging conveniently in the superconducting applications. This paper presented the conceptual design and operating characteristics of WPC4SM using different shapes' copper resonance coil. The proposed system consists of four components; RF generator of 370 kHz, copper resonance coupling coils, impedance matching (IM) subsystem and HTS magnet including rectifier system.

• 한국전자파학회논문지
• /
• 제13권1호
• /
• pp.94-100
• /
• 2002

본 논문에서는 N개의 평행 결합선로를 이용한 3 dB 결합기를 해석하였으며, 유도된 식에 의하여 최소의 결합선로 수와 크기로 설계하였다. 기존의 Spectral Domain상에서 N단 평행 결합선로의 4N-port의 산란행렬로부터 port reduction 방법을 사용하여 4-port 산란 행렬을 유도하였으며, 유도된 결과의 타당성을 검증하기 위하여 실제 제작하고 측정하였다. 제작된 결합기는 loose coupling의 평행 결합 선로를 이용하기 때문에 Lange Coupler 와 같은 높은 임피던스와 Tight coupling을 구현할 필요가 없으며, wire bonding포 용이하다. 최소의 단수로 구현하기 위해 높은 유전율과 두꺼운 기판을 사용하여 2단으로 3 dB 구현이 가능함을 제시하였다. 제작결과 3.6 GHz에서 5.5 GHz로 대략 42 %(0.5 dB unbalance) 정도의 광대역 특성을 가지고 위상차도 1$^{\circ}$내외의 결합기를 구현할 수 있었고 격리도 특성 또한 대역 내에서 15 dB 내외의 특성을 보였다.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.69-78
• /
• 1995

Nonlinear analysis methods are developed which will enable the reliable prediction of the dynamic behavior of the space shuttle main engine(SSME) turbopumps in the presence of bearing clearances and other local nonlinearities. A computationally efficient convolution method, based on discretized Duhamel and transition matrix integral formulations, is developed for the transient analysis. In the formulation, the coupling forces due to the onlinearities are treated as external forces acting on the coupled subsystems. Iteration is utilized to determine their magnitudes at each time increament. The method is applied to a nonlinear generic model of the high pressure oxygen turthods, the convolution approach proved to be more accurate and highly more efficient. For determining the nonlinear, steady-state periodic responses, an incremental harmonic balance(IHB) method was also developed. The method was successfully used to determine dominantly harmonic and subharmonic(subsynchronous) responses of the HPOTP generic model with bearing clearances. A reduction method similar to the impedance formulation utilized with linear systems is used to reduce the housing-totor models to their coordinates at the bearing clearances.

• 한국지구과학회지
• /
• 제30권5호
• /
• pp.550-564
• /
• 2009

When magnetotelluric (MT) data are obtained in the vicinity of the coast, the surrounding seas make it difficult to interpret subsurface structure, especially the deep part of the subsurface. We introduce an iterative method to correct the sea effect, based on the previous topographic correction method that removes the distortion due to topographic changes in seafloor MT data. The method first corrects the sea effect in observed MT impedance, and then inverts corrected response in a model space without the sea. Due to mutual coupling between the sea and the subsurface structure, the correction and inversion steps are iterated until the changes in each result become negligible. The method is tested for 1- and 2-D structures using synthetic MT data produced by 3-D forward modeling including surrounding seas. In all cases, the method closely recovers the true structure assumed to generate synthetic responses after a few iterations.