• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.445-446
• /
• 2012

Recently the interest in wireless power transfer have been studied. ECR (Electromagnetic Coupled Resonance) device, depending on the size of the frequency characteristics of the structure, increasing in volume and larger volume of wireless power transmission device to make use of ECR is a big barrier. So to solve this problem for ECR device miniaturization and high efficiency has been actively studied. In this paper, the size of the device for ECR IM (Impedance Matching) by applying a one-turn coil circuit, remove the device in the form of ECR Network Analyzer measured by removing the one-turn coil has demonstrated the possibility of the device in the form of ECR.

• 공업화학
• /
• 제10권3호
• /
• pp.382-387
• /
• 1999

졸-겔법을 이용하여 무정형의 $V_2O_5$ 겔을 제조한 후, 스핀코우팅에 의하여 균일한 박막의 $V_2O_5$, xerogel 전극을 개발하여 전극의 임피던스 특성을 연구하였다. $V_2O_5$겔이 xerogel로 전환되는 과정에서 스핀코우팅 방법이 $V_2O_5$의 비등방성을 감소시킬 뿐만 아니라 우수한 전기화학적 특성을 갖게 하였다. $V_2O_5$ xerogel의 리튜이온 확산계수 및 전하이동저항은 xerogel내에 존재하는 리튬이온의 물분율이 변함에 따라 증감하였으며 가역성이 우수하였다.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.74-79
• /
• 2002

High-speed probe made to test single flux quantum(SFQ) circuits was comprised of semi-rigid coaxial cables and microstrip lines. The impedance was set at 50 $\Omega$to carry high-speed signals without much loss. To do performance test of high-speed probe, we have attempted to fabricate a test chip which has a coplanar waveguide(CPW) structure. Electromagnetic simulation was done to optimize the dimension of CPW so that the CPW structure has an impedance of 50$\Omega$, matching in impedance with the probe. We also used the simulation to investigate the effect of the width of signal line and the gap between signal line and ground plane to the characteristics of CPW structure. We fabricated the CPW structure with a gold film deposited on Si wafer whose resistivity was above $1.5\times$10$_4$$\Omega$.cm. The magnitudes of S／sub 21／ of CPW at 6 ㎓ in simulations and in the actual measurements done with a network analyzer were: -0.1 ㏈ and -0.33 ㏈ (type A),-0.2 ㏈ and -0.48 ㏈ (type B), respectively. Using the test chip, we have successfully tested the performance of high-speed probe made for SFQ circuits. The probe showed the good performance overthe bandwidth of 10 ㎓.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2159-2160
• /
• 2006

본 논문은 단일주파수의 교류전류를 사용하고 8개의 접촉전극을 이용한 4 전극법방식으로 전신의 BIA (Bioelectrical Impedance Analysis)측정을 최소한의 경제적인 회로를 이용하여 구현한 체지방측정기의 개발에 관한 것이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.303-306
• /
• 2002

The EMI filter used in switching apparatus is designed on the basis of personal designer experience. A try and error approach leads to a considerables waste of time without assurance to come out to a good solution. The difficulty in the right choice of the component values resides on the dominant role played by their parasitic components at high frequencies and is aggravated by the poor knowledge of the internal impedance of the noise generators. In this paper, we proposed the design technique for the EMI filter effectively using the LISN and the EMI analyzer in the industrial field.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 후기공동학술대회 논문집
• /
• pp.67-67
• /
• 2011

본 논문에서는 접지시스템의 성능을 평가하기 위한 광대역 접지임피던스 분석기에 대하여 기술하였다. 시제작 측정기는 65 Hz~1.28 MHz의 신호발생부와 이득 20 dB, 출력 임피던스가 $0.1{\Omega}$인 전류 증폭부, 전압 및 전류 측정부, 신호처리부, 표시부로 구성된다. 또한, 외부 노이즈로 인한 측정의 오차를 줄이기 위하여 디지털 대역통과 필터를 적용하였다.

• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.40-44
• /
• 1997

This paper presents the results of studies made for measuring the relative complex permittivity of PCB sheet material in he frequency a range of 100MHz∼1GHz using vector network analyzer. A measurement cell was developed for this purpose using broad-band impedance method and the dielectric constant and loss tangent of two PCBV sheet materials, glass-epoxy and teflon, were measured. The effect of copper cladding was studied.

• Journal of Preventive Medicine and Public Health
• /
• 제30권1호
• /
• pp.31-43
• /
• 1997

Obesity usually is defined as the presence of and abnormally amount of adipose tissue. In many epidemiologic study, obesity as a health risk factor has been estimated by Body Mass Index(BMI) in general. This study was conducted to review of body fat percent measured by Bioelectric impedance analyzer as a estimator of obesity in a rural adult population. The study subjects were 421 men and 664 women who reside in the area on the Juam lake. They were sampled by multistage cluster sampling. Their mean age was 59 years old. Body fat percent increased with age, but BMI decreased with age in this study. Body fat percent was more larger at female and elder on the same BMI. The correlation coefficient between with body fat percent and body mass index was low (r=0.4737). Body fat percent was explained by not only BMI but also sex and age $(r^2=0.63)$. The result suggested that it is inadequate for BMI only to estimate obesity about elderly person who reside in the rural community. The relation of body fat percent and body mass index of this study agreed with the preceding know-ledges and studies in general.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.273-280
• /
• 1999

본 논문에서는 아나로그 파형분석의 파형추적기술을 이용하여 전자기기의 고장진단을 용이하게 할 수 있는 회로분석 시스템을 설계하고 구현하였다. 회로분석기는 CMOS, MOS 회로와 같은 신기술 전자부품들을 간단하게 검사할 수 있는 개선된 능력을 가지며, 내장된 펄스 구동기를 사용하여 SCR, TRIAC 그리고 Optocoupler와 같은 게이트 구동소자들을 고장진단하게 한다. 회로분석기는 측정하고자 하는 부품 및 기판에 전원을 인가하지 않고 측정하도록 하여 측정하는 중에 발생 가능성 있는 일시적인 Short로 인한 회로의 추가적인 손상을 방지하고 반도체소자의 임피던스 상태를 분석하며 시스템 또는 PCB기판의 영구적인 고장을 일으키는 누액 또는 기판손상으로 인한 문제를 완벽하게 찾아낼 수 있었다. 이상이 의심되는 부품과 정상 부품간의 상호 비교할 수 있기 때문에 부품 식별 번호가 없거나 알아보기 힘든 부품의 고장진단에 이상적으로 응용할 수 있는 방안을 제시하도록 한다.