• Design & Manufacturing
• /
• 제16권4호
• /
• pp.34-39
• /
• 2022

Sustained economic development around the world is accelerating resource depletion. Research and development of secondary batteries that can replace them is also being actively conducted. Secondary batteries are emerging as a key technology for carbon neutrality. The core of an electric vehicle is the battery (secondary battery). Therefore, in this study, the temperature change by the heat source of the hammer and the rotational speed (rpm) of the abrasive disc of the Classifier Separator Mill (CSM) was repeatedly calculated and analyzed using the heat flow simulation STAR-CCM+. As the rotational speed (rpm) of the abrasive disk increases, the convergence condition of the iteration increases. Under the condition that the inlet speed of the Classifier Separator Mill (CSM) and the heat source value of the disc hammer are the same, the disc rotation speed (rpm) and the hammer temperature are inversely proportional. As the rotational speed (rpm) of the disc increases, the hammer temperature decreases. However, since the wear rate of the secondary battery material increases due to the strong impact of the crushing rotational force, it is determined that an appropriate rpm setting is necessary. In CSM (Classifier Separator Mill), it is judged that the flow rate difference is not significantly different in the direction of the pressure outlet (Outlet 1) right above the classifier wheel with the fastest flow rate. Because the disc and hammer attachment technology is adhesive, the attachment point may deform when the temperature of the hammer rises. Therefore, it is considered necessary to develop high-performance adhesives and other adhesive technologies.

• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.119-137
• /
• 2023

The purpose of this research is to assess the performance of CBN and ceramic tools during the dry turning of gray cast iron EN GJL-350. During the turning operation, the variable machining parameters are cutting speed, feed rate, depth of cut and type of the cutting material. This contribution consists of two sections, the first one deals with the performance evaluation of four materials in terms of evolution of flank wear, surface roughness (2D and 3D) and cutting forces. The focus of the second section is on statistical analysis, followed by modeling and optimization. The experiments are conducted according to the Taguchi design L₃₂ and based on ANOVA approach to quantify the impact of input factors on the output parameters, namely, the surface roughness (Ra), the cutting force (Fz), the cutting power (Pc), specific cutting energy (Ecs). The RSM method was used to create prediction models of several technical factors (Ra, Fz, Pc, Ecs and MRR). Subsequently, the desirability function approach was used to achieve a multi-objective optimization that encompasses the output parameters simultaneously. The aim is to obtain optimal cutting regimes, following several cases of optimization often encountered in industry. The results found show that the CBN tool is the most efficient cutting material compared to the three ceramics. The optimal combination for the first case where the importance is the same for the different outputs is Vc=660 m/min, f=0.116 mm/rev, ap=0.232 mm and the material CBN. The optimization results have been verified by carrying out confirmation tests.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.51.1-51.13
• /
• 2021

Objectives: This study aimed to evaluate the effect of improper positioning single-peak and multi-peak lights on color change, microhardness of bottom and top, and surface topography of bulk fill and incremental composites after artificial aging for 1 year. Materials and Methods: Bulk fill and incremental composites were cured using multi-peak and single-peak light-emitting diode (LED) following 4 clinical conditions: (1) optimal condition (no angulation or tip displacement), (2) tip-displacement (2 mm), (3) slight tip angulation (α = 20°) and (4) moderate tip angulation (α = 35°). After 1-year of water aging, the specimens were analyzed for color changes (ΔE), Vickers hardness, surface topography (Ra, Rt, and Rv), and scanning electron microscopy. Results: For samples cured by single-peak LED, the improper positioning significantly increases the color change compared to the optimal position regardless of the type of composite (p < 0.001). For multi-peak LED, the type of resin composite and the curing condition displayed a significant effect on ΔE (p < 0.001). For both LEDs, the Vickers hardness and bottom/top ratio of Vickers hardness were affected by the type of composite and the curing condition (p < 0.01). Conclusions: The bulk fill composite presented greater resistance to wear, higher color stability, and better microhardness than the incremental composite when subjected to improper curing. The multi-peak LED improves curing under improper conditions compared to single-peak LED. Prevention of errors when curing composites requires the attention of all personnel involved in the patient's care once the clinical relevance of the appropriate polymerization reflects on reliable long-term outcomes.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.503-510
• /
• 2009

본 연구의 목적은 LMC로 덧씌우기 또는 보수 된 형태의 RC 보의 정적 거동 특성을 파악하는데 있다. 따라서, LMC로 덧씌우기 및 보수된 RC 보를 상대습도 60%, 온도 $20^{\circ}C$의 조건에서 양생을 실시하여 제작하였으며, 제작된 시험체를 4점 휨 실험을 수행하여 균열양상, 파괴거동 및 극한강도 등의 거동을 고찰하였다. 실험결과 전단철근이 보강된 보수형태의 RC보의 경우 100%이상의 내하력을 회복하여 보수 효과가 뛰어난 것을 알 수 있었고, LMC로 압축부에 덧씌우기 된 시험체의 경우 덧씌우기 두께가 증가함에 따라 내하력이 크게 증진되었다. 그러나, 전단철근이 보강되지 않은 보수형태의 시험체와 인장부 덧씌우기된 시험체는 부착계면 파괴양상을 보여주어 보수 및 보강 효과가 거의 없는 것으로 나타났다. 또한 부착계면의 거동특성을 파악하기 위하여 전단흐름 개념을 도입하여 LMC로 압축 덧씌우기된 시험체를 대상으로 하중증가에 따른 전단흐름량을 계산하여 부착계면 특성을 수치적으로 나타내었다.

• 한국식생활문화학회지
• /
• 제25권6호
• /
• pp.708-718
• /
• 2010

This study was conducted to examine the effects of a healthy dietary life and purchase of environmental-friendly food materials according to a mother's lifestyles of health and sustainability (LOHAS) attitudes. The subjects consisted of 295 mothers. The findings are summarized as follows. The mother's LOHAS attitude index averaged 3.39 points out of 5 points. High LOHAS attitude items were "I participate actively in separating the trash collection" (4.16 points), and "I recycle dresses that I do not wear by taking them to the recycling center" (4.08 points). In contrast, LOHAS attitude items for "I do community service activity on the weekend" (2.57 points), and "I try to serve in the local community" (2.63 points) scored very low. A high LOHAS behavior index occurred for mothers who were "resource saving", whereas "social welfare" scored low. Mother's intention to purchase environmental-friendly food materials averaged 3.61 points. Mother's health dietary life attitude score averaged 3.52 points. When age, monthly income, and the environmental-friendly food materials purchase ratio of the mother was high, the health dietary life performance was high. The LOHAS attitude index of mothers had an impact on the purchase intention of environmental-friendly food materials in resource saving and environmental-friendly oriented propensity groups. The LOHAS attitude index of mothers impacted healthy dietary life in environmental-friendly, family and health oriented propensity groups.

• 패션비즈니스
• /
• 제27권3호
• /
• pp.1-18
• /
• 2023

The online shopping industry in China has experienced rapid growth, particularly in the infant goods sector, which is considered highly promising in terms of its growth potential. This growth can be attributed to the Chinese market's increasing economic power, the implementation of new policies concerning marriage and childbirth, changes in family structure, and evolving and diverse consumer demands for infant products. While the infant clothing industry has emerged as a significant player in the Chinese market, there is still a lack of sufficient academic research on the online shopping environment specific to China's infant clothing industry. The objective of this study was to explore the influence of online experiential marketing on brand loyalty and purchase intention among Chinese consumers of children's wear. The study findings indicated that the emotional experience, action experience, and relationship experience encountered by consumers during online interactions had a positive and significant impact on brand loyalty. Both perceptual experience and cognitive experience had a positive and significant influence on consumers' willingness to make a purchase. The study also revealed that brand loyalty had a positive and significant effect on consumers' purchase intention. The perception of online experiential marketing, brand loyalty, and purchase intention varied based on individual attributes, and gender was found to moderate the relationship between online experiential marketing and brand loyalty.

• Geomechanics and Engineering
• /
• 제31권3호
• /
• pp.249-263
• /
• 2022

The specially-shaped Polycrystalline Diamond Compact (PDC) cutter is widely used in drill bit design due to its advantages of high rock cutting efficiency, strong impact resistance and long service life in hard and abrasive formation drilling. A detailed understanding of rock cutting behavior of worn specially-shaped PDC cutter is essential to improve the drilling efficiency and decrease the drilling costs. In this paper, the theoretical models of two new principles (loading performance (LP) and cutting performance (CP)) are derived for evaluating the cutting process of worn specially-shaped cutter, the theoretical models consider the factors, such as cutter geometry, aggressiveness, stress state, working life, and rock cutting efficiency. Besides, the numerical model of heterogeneous granite is developed using finite element method combined with Voronoi tessellation, the LP and CP of 12 kinds of worn specially-shaped PDC (SPDC) cutters are analyzed. The results found that the mechanical specific energy (MSE) of worn cutters first increase and then decrease with increasing the cutting depth, and the MSE increase with the increase of back rake angle except for Conical cutter and Wedge-shaped cutter. From the perspective of CP, the worn PDC cutters are more suitable for the smaller cutting depths, and the back rake angle has little effect on the CP of the specially-shaped worn PDC cutters. Conical cutter, Saddle-shaped cutter and Ellipse-shaped cutter have the highest CP value, while Rhombus-shaped cutter, Convex cutter and Wedge-shaped cutter have the lowest value in selecting cutters. This research leads to an enhanced understanding of rock-breaking mechanisms of worn SPDC cutters, and provides the basis to select of specially-shaped PDC cutters for the specific target formation.

• 융합정보논문지
• /
• 제8권1호
• /
• pp.131-138
• /
• 2018

본 연구는 완전 몰입형 가상현실 장비의 사용으로 발생하는 사이버 멀미로 인해 야기된 동적균형의 변화가 낙상을 일으키는지 알아보고자 하였다. 연구의 취지를 이해하고 자발적으로 참여에 동의한 균형감각이 정상인 20대 성인남녀 39명을 대상으로 VR착용 전과 후의 멀미지수, 심박수를 측정하고 Biorescue의 안정성 한계 검사를 실시하였다. 가상현실 체험을 위한 도구로 Samsung gear VR을 이용하였고, To the Homeland 라는 게임을 20분간 실시하였다. VR착용 후 동적균형훈련이 약간 감소하였으나 통계적으로 유의한 차이는 없었다. VR착용 전과 후의 멀미변화는 멀미설문조사를 통해 통계적으로 유의한 차이가 있음을 알 수 있었다. 심박수 변화는 Pulse Oximeter을 이용하여 심박수 증가를 보여 통계적으로 유의한 차이가 있었다. 일반인을 대상으로 완전 몰입형 가상현실 체험은 멀미가 유발되나 동적균형문제에는 다소 영향을 미치지 못하였다. 그렇기 때문에 VR 착용으로 인한 사이버멀미는 균형감소와 낙상을 유발시키지 않는다.

• 대한정형도수물리치료학회지
• /
• 제5권1호
• /
• pp.75-80
• /
• 1999

The Taekwondo being a martial sports, there are higher chances for the injury to occur than the non martial sports. Therefore, this study analyze the frequency, the area, the type, and the condition of the injury which are prone to occur in the Taekwondo matches; it is to help the Taekwondo players in prevention of the injury and in treatment. The subjects of this study were the 48 players (male 24, female 24) who participated in the final selection contest of the national team player on March 9 to 12, 1993. The data of the injury were obtained from the medical recoder staff and were analyzed to the frequency of the injury per match, the vulnerable area of the injury, the type of injury, and the condition of the injury with a gender difference. There were 24 matches for the male and 24 matches for the female, total 48 matches. Therefore, the total participation number of the players are the double of the match number. 1. The frequency of the injury per match was 18.3%(11/60) for male and 23.1%(12/52) for women. 2. The areas of the injury were ankle 36.4%(4), foot 18.2%(2), knee 18.2%(2), lower leg 18.2%(2), wrist 9.1%(1) in male; foot 33.4%(4), ankle 16.7%(2), knee 16.7%(2), lower back 16.7%(2), lower leg 8.3%(1), face 8.3%(1) in female. 3. The types of the injury were contusion 45.5%(5), sprain 27.3%(3), abrasion 9.1%(1), laceration 9.1%(1), tendon rupture 9.1%(1) in male; contusion 33.3%(4), sprain 33.3%(4), abrasion 16.7%(2), subcutaneous hemorrhage 8.3%(1), dislocation 8.3%(1) in female. 4. The condition of the injury were the unblocked attack 36.4%(4), attacking kick 27.3%(3), blocking a kick 18.2%(2), attacking punch 9.1%, impact with surface 9.1%(1) in male; attacking kick 33.3%(4), unblocked attack 25%(3), blocking a kick 25%(3), attacking punch 8.3%(1), impact with surface 8.3%(1) in female. This study shows that the injury from the Taekwondo matches occurred most in the lower extremity joints and the foot, and shows that the most of the injury types were contusion and sprain. Therefore, it is believed to be helpful to wear the proper fitting ankle or the knee protector and using other protective equipment to prevent the sports injury in the Taekwondo matches.

• 한국유통학회지:유통연구
• /
• 제17권2호
• /
• pp.93-115
• /
• 2012

본 연구의 목적은 국내 소매업태간 시장점유율 변화가 소비자 물가에 미친 영향을 실증하는데 있다. 소매업태는 백화점, 대형마트, 슈퍼마켓, 편의점, 전문상품소매점, 무점포판매로 분류하였다. 소매업태간 시장점유율은 매월 각 소매업태별 판매액을 합산하여 월별 총소매판매액을 계산한 후, 각 소매업태의 판매액이 총소매판매액에서 차지하는 비율로 측정하였다. 물가지수는 소비자물가지수, 생활물가지수, 신선식품물가지수가 고려되었으며, 아울러 소비자물가지수의 기본분류에 의한 25종류의 제품군별 물가지수와 이들 제품군을 대표할 수 있는 개별 품목 42개가 고려되었다. 통제변수로 환율, M1, 원유가격, 산업생산지수와 같은 거시경제변수가 모형에 추가되어 분석되었다. 자료의 분석기간은 2000년 1월부터 2010년 12월까지이며, 월별자료가 시계열 분석에 이용되었다. 실증분석에 앞서 본 연구에서는 ADF 검정법과 PP검정법을 이용하여 시계열자료의 안정성을 검증하였으며, 단위근 검정에 필요한 모형의 선택과 시차의 선택은 선행연구와 AIC의 기준에 의해 선택하였다. 분석결과, 소매업태간 시장점유율 변화는 물가에 영향을 미치고 있는 것으로 나타났으며, 소매업태별로 소비자물가지수, 생활물가지수, 신선식품물가지수 증감에 미치는 영향력이 차별적으로 나타났다. 또한 25개의 기본 제품군과 각 제품군에서 42개의 대표적인 품목을 추출하여 분석한 결과에서도 소매업태별 시장점유율 변화는 제품군 및 개별 품목의 물가 증감에 유의하게 영향을 미친 것으로 나타났다. 이러한 결과에 대한 이론적 및 실무적 시사점과 향후 연구 영향이 제시되었다.