• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.243-254
• /
• 2019

In this study, problems of the waterproofing methods in which water leakage occurs in the upper slab of the underground parking lot of apartment houses and the requirements considering the characteristics of the upper slab, and selected the appropriate performance(proposal) for the composite polyurea process are reviewed. As a result of the study, it is necessary to review performance such as responsiveness to upper slab of the multi-unit underground parking lot that is comprised of (1) crack and behavior responsiveness, (2) surface integrity, (3) vertical watertight stability, (4) pressure layer construction, (5) impact and pressure response and (6) vehicle moving load. As a result of evaluating 5 items corresponding to the requirements for the soft and hard complex polyurea, all of them were found to meet the conditions, and each materials were improved by compounding the materials that had problems when applying a single-ply method, thereby clarifying the advantages and disadvantages of the material property. However, in order to apply to the actual site, additional evaluation on site applicability such as mock-up evaluation should be conducted, and subsequent studies on the applicability of the market through review of economic feasibility and maintenance is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.17-24
• /
• 2021

The development of a new sorbent for carbon dioxide depends on several factors, such as fast adsorption/absorption velocity, hydrophobicity, and lower regeneration temperature than commercial sorbent. In this study, aminosilane grafted activated carbon was synthesized to capture CO2. Methyltrimethoxysilane (MTMS) and 3-aminopropyl-triethoxysilane (APTES) were used as the grafting precursor of the amine functional group. The APTES grafting activated carbon showed higher sorption property than MTMS used one. The characteristics of the separation mechanism of carbon dioxide were examined by measuring the adsorption capacity according to temperature and carbon dioxide partial pressure. The absorption capacity of carbon dioxide was similar to amine grafting activated carbon and activated carbon at 25℃, but amine-grafted activated carbon was higher at 75℃. The amine functional group-grafted activated carbon showed higher absorption capacity than activated carbon with a 1% carbon dioxide partial pressure. Aminosilane grafting of activated carbon was chemically absorbed but also showed the characteristics of physical adsorption. The reforming activated carbon with an amine functional group grafted solid absorption/adsorption sorbent would significantly impact the material engineering industry and carbon dioxide adsorption process. The functionalized sorbent is a high-performance composite material. The developed sorbent may have applications in other industrial processes of absorption/adsorption and separation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.414-421
• /
• 2022

Subsea oil and gas exploration is increasingly moving into deeper water depths, and typically, subsea pipelines operate under high pressure and temperature conditions. Owing to the difference in these components, the axial force in the pipe is accumulated. When a pipeline is operated at a high internal pressure and temperature, it will attempt to expand and contract for differential temperature changes. Typically, the line is not free to move because of the plane strain constraints in the longitudinal direction and soil friction effects. For a positive differential temperature, it will be subjected to an axial compressive load, and when this load reaches a certain critical value, the pipe may experience vertical (upheaval buckling) or lateral (snaking buckling) movements that can jeopardize the structural integrity of the pipeline. In these circumstances, the pipeline behavior should be evaluated to ensure the pipeline structural integrity during operation in those demanding loading conditions. Performing this analysis, the correct mitigation measures for thermal buckling can be considered either by accepting bar buckling but preventing the development of excessive bending moment or by preventing any occurrence of bending.

• Korean small business review
• /
• v.42 no.4
• /
• pp.173-212
• /
• 2020

Interest in sustainable management based on the stakeholder perspective is expanding not only within an organization but also across the supply chain. For large companies that have established networks, sustainability management of the supply chain is now a factor that not only determines the social performance of the company as a whole, but also determines its long-term competitive position. Despite these changes in the business world, especially the proliferation of the sustainable supply chain management (SSCM) system, systematic research on SSCM has been lacking. In particular, there was a lack of empirical analysis on which factors promoted the establishment of the SSCM system for large companies and what's the effects of SSCM. In this regard, this study analyzes i) the impact of the social responsibility pressure of customers as external stakeholders and the CSR orientation of purchasing managers as internal stakeholders on supply chain transparency and partnership cooperation respectively, and ii) whether supply chain transparency and partnership cooperation can enhance corporate reputation. The samples used in this study were 69 large companies representing Korea. The results showed that the social responsibility pressure of customers and the purchasing manager's CSR orientation were positively related to the transparency of the supply chain. However, for partnership cooperation, only the purchasing manager's CSR orientation was found to have a positive and significant effect. Meanwhile, both supply chain transparency and partnership cooperation were positively related to the corporate reputation. At the end of the study, discussions on the implications of the results and future research directions will be presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.299-308
• /
• 2022

This study was conducted to predict the tendency for heat exchange and boil-off gas (BOG) in a liquefied hydrogen tank under sloshing excitation. First, athe fluid domain excited by sloshing was modeled using a multiphase-thermal flow domain in which liquid hydrogen and hydrogen gas are in the saturated state. Both the the volume of fluid (VOF) and Eulerian-based multi-phase flow methods were applied to validate the accuracy of the pressure prediction. Second, it was indirectly shown that the fluid velocity prediction could be accurate by comparing the free surface and impact pressure from the computational fluid dynamics with those from the experimental results. Thereafter, the heat ingress from the external convective heat flux was reflected on the outer surfaces of the hydrogen tank. Eulerian-based multiphase-heat flow analysis was performed for a two-dimensional Type-C cylindrical hydrogen tank under rotational sloshing motion, and an inflation technique was applied to transform the fluid domain into a computational grid model. The heat exchange and heat flux in the hydrogen liquid-gas mixture were calculated throughout the analysis,, whereas the mass transfer and vaporization models were excluded to account for the pure heat exchange between the liquid and gas in the saturated state. In addition, forced convective heat transfer by sloshing on the inner wall of the tank was not reflected so that the heat exchange in the multiphase flow of liquid and gas could only be considered. Finally, the effect of sloshing on the amount of heat exchange between liquid and gas hydrogen was discussed. Considering the heat ingress into liquid hydrogen according to the presence/absence of a sloshing excitation, the amount of heat flux and BOG were discussed for each filling ratio.

• Exercise Science
• /
• v.21 no.3
• /
• pp.373-384
• /
• 2012

The effects of inspiratory muscle training in conjunction with aerobic exercise on inspiratory muscle strength, pulmonary function, and maximal oxygen uptake(VO₂max) were examined. Twenty four healthy collegiate men were divided into three groups; respiratory muscle training group(RTG; n=8), running exercise group(REG; n=8), and both respiratory muscle training and running group(BTG; n=8). Their pulmonary function, maximal inspiratory pressures(PImax), and VO₂max were assessed before and after intervention. RTG underwent inspiratory muscle training(IMT) with load set to 50 % of PImax, 30 times per session, twice a day, 4 days a week REG ran on a treadmill at 70-75 % of VO₂max for 30 min a day, 4 days a week. BTG participated both IMT and the running exercise. Participant's anthropometric parameters and pulmonary function were not changed. VO₂max increased by 6.1±3.3 %, 5.9±6.6 %, and 10.0±8.3 % in RTG, REG, and BTG, respectively(p< .05), and PImax also increased by 21.7±14.3 %, 19.7±12.0 %, and 27.0±12.1 % in RTG, REG, and BTG, respectively, but no group differences were found. Based on the study, although statistically insignificant, BTG showed the biggest increase of VO₂max and PImax indicating a possible synergic effect of inspiratory muscle training and aerobic exercise on respiratory responses.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.155-178
• /
• 2023

The purpose of this study is to derive factors that affect the acceptance of digital transformation in ports and empirically analyze the impact of these factors on the acceptance of digital transformation through a survey of port workers. Additionally, we test whether acceptance attitude plays a mediating role in the relationship between these factors and digital transformation acceptance. The variables used in this study are as follows. First, knowledge, self-efficacy, and involvement were included as variables related to individual characteristics, relative advantages, complexity, observability were included as variables related to innovation characteristics, and government regulations and competitor pressure were included as variables relate to environmental characteristics, so that a total of eight latent variables were selected. The results of this study are summarized as follows. First, two variables among individual characteristics, self-efficacy and involvement, were able to confirm a positive(+) causal relationship with the attitude of accepting digital transformation, and knowledge initially expected a positive(+) causal relationship with the attitude of accepting digital transformation, but the result was a negative(-) causal relationship, so that the hypothesis was rejected. Second, among the characteristics of innovation, complexity has a negative(-) causal relationship with the attitude of accepting digital transformation, and relative advantages and technological innovation have a positive(+) causal relationship with the attitude of accepting digital transformation. Finally, among the environmental characteristics, government regulations and competitor pressure, confirmed a positive(+) causal relationship with the attitude of accepting digital transformation. In addition, it was found that the attitude of accepting digital transformation had a positive(+) causal relationship with personal acceptance and social acceptance of digital transformation.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.544-553
• /
• 2023

The purpose of this study was to reveal the thermal comfort and physiological and psychological effects of spending time in broad-leaved forests in suumer. Thirty-one university students (with an average age of 21.4 ± 2.1 years) participated in the study, and a within-subjects experimental design methodology was used. The participants moved to an experimental site (with a crown closure of 76.6%) or a control site (25.9%), sat on a chair to eliminate the impact of movement, and rested for 5 minutes with closed eyes. At this time, thermal comfort, heart rate variability, heart rate, and forehead temperature were continuously measured. After that, blood pressure and pulse rate were measured, and a subjective evaluation was conducted. As a result, spending time at an experimental site showed a statistically significant decrease in the predicted mean vote and the percentage of dissatisfied values, enhancement of parasympathetic nerve activity, decrease of forehead temperature, diastolic blood pressure, heart rate, pulse rate, and improvement of personal thermal sensation (thermal sensation vote and comfort sensation vote). In conclusion, it was found that a forest with high crown closure reduces thermal stress and induces physiological and psychological relaxation.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.419-427
• /
• 2024

This study assessed the potential impact of gas leakage resulting from accidental damage to buried urban gas pipelines during perforating operation near subway construction sites. The risk of explosions due to ignition sources such as static electricity, arising from gas infiltrating the subway construction site through storm sewers and sewage pipes, was evaluated using the ALOHA program. The results of the threat zone calculation, which input various parameters of urban gas pipelines such as length, diameter, and pressure, indicated that the flammable area within the vapor cloud extended from 1.2 to 1.4 km (red zone), the blast area ranged from 0.8 to 1.0 km (yellow zone), and the jet fire extended from 45 to 61 m (red zone). This study demonstrates that within the flammable area of the vapor cloud, a specific combination of concentration and conditions can increase flammability. The blast area may experience explosions with a pressure of 1.0 psi, sufficient to break glass windows. In the event of a jet fire, high temperatures and intense radiant heat exposure lead to rapid fire propagation in densely populated areas, posing a high risk of casualties. The findings are presented in terms of the sphere of influence and threat zone ranges.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.19-31
• /
• 2023

According to the climate change scenarios, the intensity of typhoons, a major factor in Korea's natural disaster, is expected to increase. The increase in typhoon intensity leads to a rise in wave heights, which is likely to cause large-scale disasters in coastal regions with high populations and building density for dwelling, industry, and tourism. This study, therefore, analyzed observation data of the Donghae ocean data buoy and conducted a numerical model simulation for wave estimations for the typhoon MAYSAK (202009) period, which showed the maximum significant wave height. The boundary conditions for wave simulations were a JMA-MSM wind field and a wind field applying the typhoon central pressure reduction rate in the SSP5-8.5 climate change scenario. As a result of the wave simulations, the wave height in front of the breakwater at Sokcho port was increased by 15.27% from 4.06 m to 4.68 m in the SSP5-8.5 scenario. Furthermore, the return period at the location of 147-2 grid point of deep-sea design wave was calculated to increase at least twice, it is necessary to improve the deep-sea design wave of return period of 50-year, which is prescriptively applied when designing coastal structures.