• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.408-413
• /
• 2004

High speed planning boats also have been required more and more the rational strength analysis and evaluation for the optimal structural design in respect of the structural lightness according to the high speed trend. Even though the suggestion of the simple type equation for the equivalent dynamic pressure is reasonable to design the scantling of ship structure conveniently, many research activities for more reasonable improvement of the simple design pressure, have been continued to suggest the more accurate equivalent static description of tire structural response such as the deflection and stress of hull structure. In this research, we focus on the aluminum bottom stiffened plate structure in which structural scantling is mainly depend on the local loads such as dynamic or impact pressure without other load effects and structural response for the simple dynamic equivalent pressure was investigated through the structural analysis. In order to investigate the structural response of the bottom stiffened plate structure subjected to the dynamic equivalent design pressure, linear and nonlinear structural analysis of the bottom stiffened plate structure of 4.3 ton aluminum planning boat was performed based on the equivalent static applied loads which were derived from the KR regulation and representative one among various dynamic equivalent pressure equations. From above analysis results, we found that the response such as deflection and stress of plate member was similar with the response results of one plate member model with fixed boundary, which was published previous paper and in case of KR design loading, all response of stiffened plate structure were within elastic limit. Through the nonlinear analysis, nearly elastic behavior including the slight geometrical nonlinear response was dominant but plastic local zone was appeared at $85\%$ limit load. Therefore, we can say that through tire linear and nonlinear analysis, this stiffened plate member has no structural strength problem based on the yield criteria in case within $60\%$ limit load except the other strength point of view such as the fatigue and buckling problem.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.225-237
• /
• 2018

The difficulties of satellite vibration testing are due to the commonly expressed qualification requirements being incompatible with the limited performance of the entire controlled system (satellite + interface + shaker + controller). Two features cause the problem: firstly, the main satellite modes (i.e., the first structural mode and the high and low tank modes) are very weakly damped; secondly, the controller is just too basic to achieve the expected performance in such cases. The combination of these two issues results in oscillations around the notching levels and high amplitude beating immediately after the mode. The beating overshoots are a major risk source because they can result in the test being aborted if the qualification upper limit is exceeded. Although the abort is, in itself, a safety measure protecting the tested satellite, it increases the risk of structural fatigue, firstly because the abort threshold has been already reached, and secondly, because the test must restart at the same close-resonance frequency and remain there until the qualification level is reached and the sweep frequency can continue. The beat minimum relates only to small successive frequency ranges in which the qualification level is not reached. Although they are less problematic because they do not cause an inadvertent test shutdown, such situations inevitably result in waiver requests from the client. A controlled-system analysis indicates an operating principle that cannot provide sufficient stability: the drive calculation (which controls the process) simply multiplies the frequency reference (usually called cola) and a function of the following setpoint, the ratio between the amplitude already reached and the previous setpoint, and the compression factor. This function value changes at each cola interval, but it never takes into account the sensor signal phase. Because of these limitations, we firstly examined whether it was possible to empirically determine, using a series of tests with a very simple dummy, a controller setting process that significantly improves the results. As the attempt failed, we have performed simulations seeking an optimum adjustment by finding the Least Mean Square of the difference between the reference and response signal. The simulations showed a significant improvement during the notch beat and a small reduction in the beat amplitude. However, the small improvement in this process was not useful because it highlighted the need to change the reference at each cola interval, sometimes with instructions almost twice the qualification level. Another uncertainty regarding the consequences of such an approach involves the impact of differences between the estimated model (used in the simulation) and the actual system. As limitations in the current controller were identified in different approaches, we considered the feasibility of a new controller that takes into account an estimated single-input multi-output (SIMO) model. Its parameters were estimated from a very low-level throughput. Against this backdrop, we analyzed the feasibility of an LQG control in cancelling beating, and this article highlights the relevance of such an approach.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.891-899
• /
• 2013

This paper suggests a test and evaluation procedure of conformal load-bearing antenna structure(CLAS) for high speed military jet application. A log periodic patch type antenna was designed for multi-band communication and navigation antenna. Carbon/Glass fiber reinforced polymer was used as a structure supporting aerodynamic loads and honeycomb layer was used to improve antenna performance. Multi-layers were stacked and cured in a hot temperature oven. Gain, VSWR and polarization pattern of CLAS were measured using anechoic chamber within 0.15~2.0 GHz frequency range. Tension, shear, fatigue and impact load test were performed to evaluate structural strength of CLAS. Antenna performance test after every structural strength test was conducted to check the effect of structural test to antenna performance. After the application of new test and evaluation procedure to validate a new CLAS, a design improvement was found.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.623-630
• /
• 2007

Grouting materials are used for the unification of superstructural and substructural body like bridge seat (shoe) or machinery pedestal and e.t.c by filling their intercalary voids. Accordingly, grouting materials have been developed and used mainly with products of high strength because those materials are constructed specially in a part receiving large or impact load. In this situation, the structural body constructed by grouting materials with high stiffness-centered (caused by high strength) products is apt to cause brittle failure when receiving over a limit stress and to cause cracks according to cumulative fatigue by continuous and cyclic load. In addition, grouting materials are apt to cause cracks by using too much rapid hardening agents that give rise to high heat of hydration to maintain high strength at early age. In this study, to overcome these problems, cement type grouting materials including powder of waste tire and resin as elastic materials which aim to be more stable construction and to be improvement of mother-body's unification are developed and endowed with properties of high toughness and high durability add to existing properties of high flowability, non-shrinkage and high strength. Besides, this study contribute to of for green construction materials for being possible recycling industrial waste like waste tire and flyash. On the whole, seven type mixing conditions are tested and investigated to choose the best mixing condition.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.161-168
• /
• 2016

Thanks to mass production and provision of smartphones and the HMD (head mounted display), VR (virtual reality) is now being applied to various areas. The VR HMD is the interface equipment which allows users to have realistic experiences through human sensory organs such as vision and auditory sense. Since the majority of VR equipment is operated by the display for both eyes, 360-degree video content and the depth information, the VR mechanism is closely related to human senses, especially vision. Previous studies have focused on how to minimize negative impact such as motion sickness or visual fatigue. Little attention has been paid on research about the visual treatment. Therefore, the focus of this study is to develop technical elements for utilization of vision therapy with the VR HMD and explore possible areas to apply it. To this end, we analyzed the past case studies and technical elements to identify 16 areas for vision therapy. We also developed the optical parameters for utilization of the VR HMD visual targets. The result of this study is expected to be utilized for development of visual targets for vision therapy based on the VR HMD.

• Women's Health Nursing
• /
• v.5 no.1
• /
• pp.80-95
• /
• 1999

The purpose of this study was to investigate the characteristics of low birth-weight infants and their's mothers, and to identify the factors which influenced to delivery of L.B.W infants. The data derived from K. General Hospital and J. obs & gyn clinic in pusan from January, 1998 to August, 1998, which were from mothers of having B. W infants. The factors used for this study were characteristics of general, obstetrical, environmental aspects and physical and psychological life experiences during pregnancy. Analysis of data obtained were computerized statistically by using SPSS 7.5 WIN program. the data were analysed as number, frequency, percentage, t-test and ANOVA. The major results obtained of this study were as follows : 1) Gender that L.B.W infants were male in 47.2% and female in 52.8%, body weight of 2001~2500gm was above 8 in 68.5%, and below 5 in 1.8%. The L.B.W infants with complications were 7, which were 6.5%. The kinds of malformations were the Cleft palate & lip, Hyper-kalemia, Hypoglycemia, Meningocele, CHD, Down syndrome and each of them marked 0.9%. 2) In the general characteristics of pregnant women, the age group of 25~29 years was the most common as 46.3%. Over 35 years of age, elderly gravidas were in 7.5%. the height of 156~160cm was the most common as 52.8%. pregnant women of below 150cm height was in 3.7%. body weight of 51~55kg was the most common as 38%. pregnant women of below 45kg were in 19.4%. The women with smoking and drinking episodes during pregnancy were 1.9% and 25%. In the status of marriage, married women were in 95.4%, unmarried ones were in 1.9%, and unmarried couples were in 2.8%. Iin he obstetrical characteristics of pregnant women, pregnant women with gestational age under 37wks were in 45.4%, and the ones over 38wks were 54.6%. At the methods of delivery, normal spontaneous vaginal deliveries were in 51.9%, which were the most common, cesarian section deliveries were in 47.2%, and breech deliveries were in 0.9%. In the environmental characteristics of pregnant women, 40.8% of pregnant women lived in house or apartments with stairs, 23.1% of them lived in the high altitude. the pregnant women who ran a household without a helper were in 65.7%. In the pregnant women who had underwent life experiences of physical and psychological stress during pregnancy. life experiences of physical stresses were described as persistent fatigue due to lifestyle, traumatic experience, illness, move away with an effort, physical impact caused by discord. life experiments of psychological stresses were describeded as trouble with their husbands, discord with one's husband family, family problems, and conflicts due to environmental factors, etc. The number of the pregnant women who had complications during pregnancy was 32, which was 29.6% totally. Among them, pre-eclampsia was in 12.1% and the premature rupture of membrane in 7.4%. 3) In the analysis of the general, obstetrical, and circumstantial characteristics and L.B.W infants. There were statistical difference significantly between the gestational age of pregnant women(F=12.035, P=.000), and the status of marriage(F=3.207, P=.044), and maternal complication(t=2.344, P=.021) etc.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.368-375
• /
• 2013

Failure of small bore piping welds is a recurring problem at nuclear power plants. And the socket weld cracking in small bore piping has caused unplanned plant shutdowns for repair and high economic impact on the plants. Consequently, early crack detection, including the detection of manufacturing defects, is of the utmost importance. Until now, the surface inspection methods has been applied according to ASME Section XI requirements. But the ultrasonic inspection as a volumetric method is also applying to enforce the inspection requirement. However, the conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. And there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD(outer diameter) surface of small bore piping. In this study, phased array ultrasonic inspection technique is applied to increase inspection speed and reliability. To achieve this object, the 3.5 MHz phased array ultrasonic transducer are designed and fabricated. The manually encoded scanner was also developed to enhance contact conditions and maintain constant signal quality. Additionally inspection system is configured and inspection procedure is developed.

• Korean Journal of Adult Nursing
• /
• v.12 no.2
• /
• pp.175-183
• /
• 2000

The study was done by applying a phenomenological study, which is qualitative research methods, in order to understand the meaning of the lived experiences, to confirm and describe the meaning structure, and to prepare nursing interventive strategies centering around the meanings of the inpatients' families in the intensive care units. In the study, the family members were the main important nursing providers for in the inpatients' who were admitted in the neurosurgical intensive care unit in K-university hospital and who agreed to participate in the study after being given on explanation about the purpose of the study. The data were collected from the seven participants who had feelings of trust and intimacy favorable toward the researcher as they were families of patients who had been cared for by the researcher in the ICU where the researcher has been assigned. The data were collected from April to October, 1999. The participants described their experiences as candidly as possible. The researcher described closely the lived experiences with their own words and the observations of the researcher. A tape recorder was used with the consent of the participants to prevent nursing information and communication. The analysis of the data was made through the phenomenological analytic method suggested by Giorgi; as an unit of description, which include the participants' expressions and the researcher's observations, the analysis was used based on the data described from the expressions of the participants and the details of observations of the researcher. The conclusions of the study were as follows : The meanings of the lived experience of the inpatients' families in the ICU was confirmed by indepth interviews and observations including these of the participatants : (1) Psychological impact: confusion, impatience, surprise, insensibility; (2) Physical suffering: fatigue, discomfort, indigestion; (3) Psychological suffering: heartbreaking emotion, anxiety, annoyance, fear, compassion, grief; (4) Economical suffering: economical difficulties; (5) Psychological disagreement: escape from reality, personnel avoidance, grudge, powerlessness, carefulness, transposition of life-tract, abandonment, role-crisis, hope, lack of understanding, regret, feeling of ambivalence(progressive process, medical personnel interest); (6) Psychological dependency; self-reliance group support, family support, religious support; (7) Psychological acceptance; acquaintance, gratitude, reassurance; The study will offer better understanding of experiences therefore, based on the experiences confirmed by the study, it may facilitate more appropriate nursing interventive strategies for health maintenance and to prevent occurrence of possible problems with the inpatients' families in the ICUs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.155-162
• /
• 2012

When RC (Reinforced Concrete) structures are exposed to sea water, steel corrosion can occur and this leads a degradation of structural performance. Referring the electro-deposition system with sea water from the 1st step research, durability and structural performance are evaluated in coated steel and RC members containing it in the 2nd research. In the durability performance test, Half Cell Potential test is performed and the coated steel is evaluated to have the high resistance to corrosion, which shows only 35% of corrosion velocity in normal (bare) steel. In the structural performance test, tensile strength, adhesive strength, and flexural/shear in RC member are performed. For the electro-deposit coated steel, increasing ratios of 3.2% and 8.8% are evaluated in the test of tensile strength and adhesive strength, respectively. For the structural test in RC member, there is no big difference between RC members with coated and non-coated steel in ultimate load and failure pattern It is evaluated that the chemical compound with $CaCO_3$ and $Mg(OH)_2$ from electro-deposition causes slightly increased structural performance. The electro-deposit coated steel can be more widely applied after performance verification from several tests like fatigue, resistance to impact, and long term-submerging test.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.3
• /
• pp.106-120
• /
• 2010

Objectives: Sanjointang has been clinically used much for treating sleeplessness. However, the effects of Sanjointang in artificial sleep deprivation situations are not known. The purpose of this study is to evaluate the heart rate, left ventricular systolic pressure, left ventricular diastolic pressure, +dp/dt maximum, -dp/dt maximum, and -dp/dt / +dp/dt ratio which are related to the hemodynamic functions of the heart by using sleep-deprived Sparague-Dawley rats, in order to clarify the impact of Sanjointang on hemodynamic functions of the heart of sleep deprived rats. Methods: Eighteen hearts were removed from the male Sparague-Dawley rats weighting about 180g were perfused by the Langendorff technique with modified 37 Krebs-Henseleit's buffer solution at a constant perfusion pressure (60mmHg). They were randomly assigned to one of the following three groups, 1) Normal group (those which did not have sleep deprivation and received normal saline administration), 2) Control group (sleep deprived and normal saline administered), 3) Sample group (sleep deprived and Sanjointang was administered). Control and sample groups rats were deprived 96 hours of sleep by using the modified multiple platform technique. Heart rate, left ventricular systolic pressure, left ventricular diastolic pressure, +dp/dt maximum, -dp/dt maximum, -dp/dt / +dp/dt ratio were evaluated at baseline after the administration of either normal saline or Sanjointang. Results: The heart rate and -dp/dt / +dp/dt ratio was significantly decreased in rats with 96 hours of sleep deprived significantly decreased. The change in the heart rate after administering Sanjointang did not show any significant difference. The left ventricular systolic pressure of the removed heart significantly decreased due to Sanjointang administration, while the left ventricular diastolic pressure significantly increased (p<0.05). The +dp/dt maximum and -dp/dt maximum both significantly decreased in the removed heart after administering Sanjointang. (p<0.05). There was no significant difference observed in the -dp/dt / +dp/dt ratio after administering Sanjointang. Conclusions: According to the results above, sleep deprivation significantly decreases heart rate and -dp/dt / +dp/dt ratio. This is considered as a result of exhaustion due to accumulation of fatigue. Meanwhile, Sanjointang reduced left ventricular systolic pressure and raised left ventricular diastolic pressure, and relieved the contractility and relaxation of the myocardium. Consequently, this reduces the burden of the heart and creates a relatively stabilized heart condition similar to a sleeping condition.