• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.857-864
• /
• 2011

Oxy-fuel combustion with many advantages such as high combustion efficiency, low flue gas flow rate and low NOx emission has emerged as a promising CCS technology for coal combustion facilities. In this study, the effects of the direct sulfation reaction on $SO_2$ removal efficiency were evaluated in a drop tube furnace under typical oxy-fuel combustion conditions represented by high concentrations of $CO_2$ and $SO_2$ formed by gas recirculation to control furnace combustion temperature. The effects of the operating parameters including the reaction temperature, $CO_2$ concentration, $SO_2$ concentration, Ca/S ratio and humidity on $SO_2$ removal efficiency were investigated experimentally. $SO_2$ removal efficiency increased with reaction temperature up to 1,200 due to promoted calcination of limestone reagent particles. And $SO_2$ removal efficiency increased with $SO_2$ concentrations and the humidity of the bulk gas. The increase of $SO_2$ removal efficiency with $CO_2$ concentrations showed that $SO_2$ removal by limestone was mainly done by the direct sulfation reaction under oxy-fuel combustion conditions. From the impact assessment of operation parameters, it was shown that these parameters have an effects on the desulfurization reaction by the order of the Ca/S ratio > residence time > $O_2$ concentration > reaction temperature > $SO_2$ concentration > $CO_2$ concentration > water vapor. The semi-empirical model equation for to evaluate the effect of the operating parameters on the performance of in-furnace desulfurization for oxy-fuel combustion was established.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.21-35
• /
• 2017

The Korea Wave has been spread out all over the world since 1990s. Therefore, it can be seen that the Korea wave phenomenon is one of determinants of international tourism demand for Korea in addition to the macro factors such as population, GDP per capita, exchange rate, distance, etc. Existing studies have focused on analyzing the impacts of the Korea wave on the international tourism demand for Korea by using the aggregated data. However, the impacts of the Korea wave inducing tourism vary in different age groups. In this study, we conduct empirical analysis in order to explore how different the effects of Korea wave on the demand of foreign tourists visiting to Korea in different age groups are. The estimation results show that the Korea Wave influences most on international tourism demand for Korea in the age group of the under-20s. Noticeable is that the estimated effects of the Korea Wave on international tourism demand for Korea in the age group of the over-50s are higher than those in the 30s and 40s. This indicates that the parent generations visit Korea together with their young children who are most affected by the Korea Wave. Through this study, it is necessary to develop strategies for tourism marketing linked to children and parents, and to develop tourism products to increase the number of foreign visitors to Korea in the 30s and 40s.

• Journal of Haehwa Medicine
• /
• v.8 no.1
• /
• pp.865-878
• /
• 1999

With advances in neonatal medicine, smaller and sicker infants are surviving premature birth. As these tiny patients battle for their lives, their parents also struggle with psychological consequences of an unexpected role. The birth of a sick infants has long been documented as stressful events for the parents. High stress levels may alter parents' interaction with their baby and impair their communication with health professionals, which can in turn affect parents' participation in care planning and decision making. Nursing interventions aimed at reducing the parental stress and anxiety levels during this crisis may have a positive impact on their ability to form an attatchment to their baby and make prudent decisions about his care. The planning of such interventions would be inhanced if the contributions of various factors to increased parental stress levels were identified. This descriptive study was conducted to understand the contents and degree of parental stress in the NICU during their premature's hospitalization, and to give a baseline data in developing nursing intervention program. Subjects were the 60 mother of hospitalized newborn in NICU of 2 University Hospital in Taejon City from April 1st, 1999 to June 30th, 1999, who agreed to take part in this study. The instrument used in this study were Parental Stressor Scales:NICU(PSS:NICU) developed by Miles et al.. and validated by 3 NICU practitioners and 3 child health nursing faculties. The questionnaire has 4 dimensions and 45 items; sight and sounds of NICU(5 items), babies' appearance and behavior nursing intervention(19 items), parental role alteration and relationship with their baby(10 items), health team communication(11 items). The questionnaire asks parents to rate each item on a five-point Likert type scale that ranges from "not stressful" (1) to "extremely stressfu1"(5). Total scores representing overall stress from the NICU environment are calculated by summing response to each item. A high score indicates high stress. A subscale score is calculated by summing the responses to each item in the subscale. Cronbach's ${\alpha}$ coefficients were .93. The data was analyzed as average, Frequency, Standard deviation, t-test, ANOVA, Pearson correlation coefficient by use of SPSS/PC+. The results of this study is summarized as follows ; 1. The total perceived stress level score of mothers of premature baby was slightly high($3.66{\pm}1.1$). The highest scored dimension was 'relationship with their baby and parental role change'($4.21{\pm}0.9$), and next were 'appearance and behavior of the baby'($3.92{\pm}1.1$), 'communication with health team'($3.32{\pm}1.3$), 'sight and sounds of NICU'($3.30{\pm}1.1$). 2. There were statistically significant correlation noted ; mother's perceived severity of the baby's condition(F=8.0012, P= .0125) and baby's gestational age(r = -.4724, P = .0500). In summary, information about physical environment of NICU, the mother's perceived severity of premature baby's state, maternal role change related variables and the knowledge of characteristics of premature baby must be included in nursing intervention program of mother's of premature baby in reducing the parental stress and anxiety level. It is suggested that each NICU needs to develop a nurse managed supportive care program for parents of premature baby. Also, it is suggested that there need to investigate the coping mechanism of mother of premature baby.

• Composites Research
• /
• v.33 no.2
• /
• pp.39-43
• /
• 2020

Recently, fabrication process of thermoplastic polyamide-based composites with recyclability as well as impact, chemical, and abrasion resistance have been widely studied. In particular, thermoplastic reactive resin transfer molding (TRTM) in which monomer with low viscosity is injected and in-situ polymerized inside mold has received a great attention, because thermoplastic melts are hard to impregnate fiber preform due to their very high viscosity. However, it is difficult to optimize the processing conditions because of high reactivity and sensitivity to external environments of the used monomer, ε-caprolactam. In this study, viscosity as an important process parameter in TRTM was measured during in-situ anionic polymerization of ε-caprolactam and the solutions for problems caused by high polymerization rate and sensitivity to moisture and oxygen were suggested. Reliability of the improved measurement technique was verified by comparing the viscosity behavior at various environmental conditions including humidity and atmosphere, and it is expected to be helpful for optimization of TRTM process.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.40-46
• /
• 2006

Hepatoma is one of 3 most common malignancies in Korea, the survival rate is not improved since last decades because of delayed diagnosis and limited treatment conditions. Radiation was one of treatment options but the impact on the survival is not remarkable. High dose exposure to target area was suggested for improved effect but low tolerance dose of normal liver tissue is the main limited factor. IMRT is the advanced form of 3DCRT, for focusing high dose on target with minimal dose to surrounding normal tissues. Motion of the tumor by respiration, cardiac pulsation and peristalsis is the main treatment harrier of IMRT for treatment of hepatoma patients. Development of QA technique for acceptable geometrical uncertainties and dose error on target volume is essential for IMRT in clinical treatment but proper QA technique is not yet developed. This study compared the verification film dosimetry with measured dose in phantom and calculated dose in planning computer on exactly same conditions of patient treatments. Within 3% dose differences between 3 groups were confirmed. We suggest that our verification QA technique is easy, economic, iterative and acceptable in clinical application for advanced hepatoma patients.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.3
• /
• pp.355-362
• /
• 1999

Objective: This study was performed to compare the clinical response to controlled ovarian hyperstimulation (COH) of in vitro fertilization and embryo transfer (IVF-ET) according to the size of baseline ovarian cyst. Method: From February 1992 to March 1999, a retrospective analysis was done of 272 cases who underwent COH using mid-luteal phase long protocol of gonadotropin-releasing hormone agonist (GnRH-a) for IVF-ET. These cases were divided into four group; group 1 (n=63) had cysts with mean diameters between 20.0 and 29.0 mm on their baseline ultrasound on cycle day 3, group 2 (n=57, $30.0{\sim}49.0mm$), group 3 (n=68, >50.0 mm) and control group (n=84). Cases were excluded according to the following criteria; pure male factor infertility, the presence of only one ovary, high CA-125 level and previous endometriosis. Results: There were no statistically significant differences between cases with baseline ovarian cyst <50.0 mm in diameter and control group in any of the parameters. However, cases with baseline ovarian cyst>50.0 mm in mean diameter needed more amount of human menopausal gonadotropin (hMG), showed significantly lower estradiol ($E_2$) level, the number of follicle >15.0 mm on the day of human chorionic gonadotropin (hCG) administration, the number of oocytes retrieved, the number of mature oocytes, and pregnancy rate compared with control group. Conclusion: This study suggests that cases with baseline ovarian cyst <50.0 mm in diameter do not adversely impact on IVF-ET outcome. However, cases with baseline ovarian cyst >50.0 mm in diameter had adverse effects on various parameters. Therefore, to improve the outcome of IVF-ET in these cases, ovarian cyst aspiration prior to initiating COH may be required.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.385-392
• /
• 2015

This study in A City was performed to target low-income families in NutriPlus Program, infants toddlers for parents' convergence education effects were analyzed. The subjects of the study was involved in parents' education level can be identified. During the same period before and after the evaluation of nutrition education to a total of 263 people were targeted. It is comprised of the infants of 61 and of the toddler 192. nutrition education, dietary life attitude of infants after the increase in the width of the scores were as follows : Less than high school group was $6.57{\pm}6.51$, Greater than college group was $4.57{\pm}6.09$ a, rather less than high school group showed a large increasing rate, which was statistically significant (p = 0.03). NutriPlus Program is growing due to low-income families to improve children's nutritional status and nutrition knowledge and dietary life attitude will have a positive impact on, part of convergence education. In addition, parents' education level, depending on, varied and effective nutritional education should be taken.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.483-492
• /
• 2020

Considering the fact that many students and parents spend a considerable amount of time and economic power on prior learning and that the environments of internet-based society change rapidly, it is worth examining the status and effectiveness of prior learning. In response, the study surveyed 186 first-year students of A high school in Changwon on the basic status of science prior learning. By the analysis results for the status, 39.8% of the students surveyed said they had experience in prior learning in science. Among the students experienced, 56 students who started science prior learning after the start of winter vacation in the third grade of middle school were analyzed the specific status of science prior learning and the impact of science prior learning on science achievements. The semi-subject form of pre-learning in science showed the highest response rate with 50.0 percent, and the motivation for pre-learning in science was the highest with 33.9 percent improvement in test scores. The confidence and learning intention were positive when conducting prior learning in a semi-subject form, and interest and value were positive when conducting prior learning in a self-directed form. As a result of the survey on the effect of science prior learning, 71.4% of the students who experienced science prior learning showed positive scientific achievement.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.80-85
• /
• 2013

Anionic polymerization of hexafluoropropylene oxide (HFPO) was investigated under various reaction conditions such as various hexafluoropropylene (HFP) oligomers composed of dimer and trimer, reaction temperatures, and feeding rates of hexafluoropropylene oxide monomer. HFP oligomer was synthesized from cesium fluoride (CsF) and HFP in tetraethyleneglycol dimethylether (TG). Under 5 g of CsF, 200 g of HFP, 10 g of TG, and reaction temperature $30^{\circ}C$, HFP dimer content in oligomer was relatively increased. HFPO oligomer with a high molecular weight ($M_w$ 3600) was synthesized in conditions of reaction temperature $0^{\circ}C$, HFP oligomer with 35.1% of dimer, and 1.85 g/min of HFPO feeding rate. Otherwise, chain transfer was increased under unoptimized reaction conditions. Consequently, it was found that reaction conditions impact chain propagation and chain transfer in the anionic polymerization of HFPO.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.1-9
• /
• 2002

The main goal of this study was to analyze the effect of process additives, i.e. maleated polypropylene (MAPP), and nucleating agent on the viscoelastic properties of different types of extruded polypropylene-wood plastic composites manufactured from either PP homopolymer, high crystallinity PP or PP impact copolymer using dynamic mechanical thermal analysis. And also, the esterification reaction between wood flour and maleated polypropylene, and its role in determining the mechanical properties of wood flour-polypropylene composites was investigated. The wood plastic composites were manufactured using 60% pine wood flour and 40% polypropylene on a Davis-Standard $Woodtruder^{TM}$. Dynamic mechanical thermal properties, polymer damping peaks(than ${\delta}$), storage modulus (E') and loss modulus (E") were measured using a dynamic mechanical thermal analyzer. XPS (X-ray Photoelectron Spectroscopy), also known as ESCA (Electron Spectroscopy for Chemical Analysis) study of wood flour treated with MAPP was performed to obtain information on the chemical nature of wood fiber before and after treatment. To analyze the effect of frequency on the dynamic mechanical properties of the various composites, DMA tests were performed over a temperature range of -20 to $100^{\circ}C$, at four different frequencies (1, 5, 10 and 25 Hz), and at a heating rate of $5^{\circ}C/min$. From these results, the activation energy of the various composite was measured using an Arrhenius relationship to investigate the effect of maleated PP and nucleating agent on the measurement of the interphase between the wood and plastic of the extruded polypropylene wood plastic composites.