열가소성 고분자 복합재료 개발을 위하여 매트릭스수지로는 폴리프로필렌(PPF) 섬유를 사용하고 유기계 강화섬유로 비닐론(VF), 아라미드(KF) 및 나일론(PAF) 섬유 등을 사용하여 복합매트를 얻은다음 압축 성형하여 고분자 복합재료를 제조하였다. 제조한 고분자 복합재료의 충격 특성 및 형태학적 특성 등을 측정하였다. 아이조드충격강도는 VF/PP가 크며, 고속충격특성은 KF/PP계가 약간 크게 나타났다. Ductility Index(Dl)는 VF/PP>KF/PP>PAF/PP 순으로 나타났으며 VF/PP의 최대 DI값은 섬유중량분율이 20%일 때 2.43이었다. 유기섬유 충전률은 20~30%가 최적값이었으며 SEM 관찰로 섬유분산상태 및 배향성은 양호함을 확인하였다. 결론적으로 VF/PP 복합재료가 KF/PP 및 PAF/PP 복합재료에 비해 계면접착력이 가장 우수하였다.
나일론 6의 상온 및 저온에서의 내충격성을 개선할 목적으로 폴리우레탄 (PU)/나일론 6 용융블렌드를 Haake Rheomix를 사용해 제조한 후 PU 함량 (10, 20, ,30, 40, 50 wt%) 및 블렌딩 시간 (5, 10, 15, 20분)에 따른 결정구조, 동역학적 특성, 인장특성 및 충격거동을 WAXD, DMA, UTM 및 notched Izod 충격시험기 등을 이용하여 조사하였다. PU 함량 및 블렌딩 시간이 증가할수록 블렌드의 결정회절피크의 형태는 넓어지고 회절피크의 강도는 감소하였다. 블렌드의 유리전이온도, 인장강도, 인장탄성률로 감소하였으며, 신도는 증가하였다. 또한 PU 함량이 블렌딩 시간보다 결정구조, 동역학적 특성 (tan $\delta$) 및 인장특성 등에 더 큰 영향을 미침을 알 수 있었다. PU/나일론 6 (10/90 wt%) 블렌드 상온 ($20^{\circ}C$) 및 저온 ($-35^{\circ}C$)에서의 충격강도가 크게 향상될 수 있음을 확인하였다.
This study investigates the effects of isothermal holding temperature and time on the microstructure, hardness and Charpy impact properties of medium-carbon bainitic steel specimens. Medium-carbon steel specimens with different bainitic microstructures are fabricated by varying the isothermal conditions and their microstructures are characterized using OM, SEM and EBSD analysis. Hardness and Charpy impact tests are also performed to examine the correlation of microstructure and mechanical properties. The microstructural analysis results reveal that granular bainite, bainitic ferrite, lath martensite and retained austenite form differently in the specimens. The volume fraction of granular bainite and bainitic ferrite increases as the isothermal holding temperature increases, which decreases the hardness of specimens isothermally heat-treated at $300^{\circ}C$ or higher. The specimens isothermally heat-treated at $250^{\circ}C$ exhibit the highest hardness due to the formation of lath martensite, irrespective of isothermal holding time. The Charpy impact test results indicate that increasing isothermal holding time improves the impact toughness because of the increase in volume fraction of granular bainite and bainitic ferrite, which have a relatively soft microstructure compared to lath martensite for specimens isothermally heat-treated at $250^{\circ}C$ and $300^{\circ}C$.
This paper aims to adapt Multilinear regression (MLR) to predict the strength and toughness of SIFCON containing various pozzolanic materials. Slurry Infiltrated Fibrous Concrete (SIFCON) is one of the most common terms used in concrete manufacturing, known for its benefits such as high ductility, toughness and high ultimate strength. Assessment of compressive strength (CS.), flexural strength (F.S.), splitting tensile strength (STS), dynamic elasticity modulus (DME) and impact energy (I.E.) using the experimental approach is too costly. It is time-consuming, and a slight error can lead to a repeat of the test and, to solve this, alternative methods are used to predict the strength and toughness properties of SIFCON. In the present study, the experimentally investigated SIFCON data about various mix proportions are used to predict the strength and toughness properties using regression analysis-multilinear regression (MLR) models. The input parameters used in regression models are cement, fibre, fly ash, Metakaolin, fine aggregate, blast furnace slag, bottom ash, water-cement ratio, and the strength and toughness properties of SIFCON at 28 days is the output parameter. The models are developed and validated using data obtained from the experimental investigation. The investigations were done on 36 SIFCON mixes, and specimens were cast and tested after 28 days of curing. The MLR model yields correlation between predicted and actual values of the compressive strength (C.S.), flexural strength, splitting tensile strength, dynamic modulus of elasticity and impact energy. R-squared values for the relationship between observed and predicted compressive strength are 0.9548, flexural strength 0.9058, split tensile strength 0.9047, dynamic modulus of elasticity 0.8611 for impact energy 0.8366. This examination shows that the MLR model can predict the strength and toughness properties of SIFCON.
S-2유리섬유직물과 폴리에스터 수지로 구성된 적충복합재료를 케블라 49 Thread로 1/2인치, 1인치 2인치 간격으로 스티칭하여 스티칭 간격에 따른 물성과 충격 강도의 변화로부터 최적스티칭 조건을 구하였으며 또한 스티칭하지 않은 적층복합재료와의 물성차를 비교연구하였다. 인장실험과 3점굽힘실험을 통해 시편의 종류별 기본 물성을 알아보았고, 234.7J의 충격에너지를 가해 시편의 파단 현상과 에너지 흡수 능력을 조사하였다. 파단에너지의 약 50% 정도인 110.2J의 충격에너지로 3회 반복실험하여 시편의 손상정도와 충격강도를 비교 검토하였다. 인장실험과 굽힘 실험의 결과 1인치 간격으로 스티칭한 시편이 가장 높은 강도를 보였으며, 충격실험에서도 가장 뛰어난 에너지 흡수능력 및 손상에 대한 저항을 보였다. 반복충격 실험의 결과 스티칭하지 않은 시편은 현저한 충격강도의 감소를 보인 반면 스티칭한 시편은 반복충격에도 에너지 흡수능력이 우수하게 유지되었다. C-scanning으로 손상부위를 관찰한 결과 스티칭으로 인해 손상영역의 확산이 억제되어 현저히 감소함을 보여주었다. 스티칭 간격이 너무 조밀한 경우 강도의 향상보다는 스티칭으로 인한 손상이 더 커져서 1/2인치 간격으로 스티팅한 시편의 경우는 인장강력이나 충격에너지 흡수가 스티칭하지 않은 시편에 비해 오히려 감소하는 결과를 나타내었다. 그러나 이러한 감소에도 불구하고 외부충격에 의한 손상영역의 확산은 효과적으로 억제되어 국부적인 손상만이 발생함을 알 수 있었다.
본 연구에서는 자원 재활용 측면에서 매트릭스수지로 재활용플라스틱과 보강재로 친환경 천연섬유로 구성된 그린복합재료를 제조하고 그 특성을 탐구하였다. 먼저 재활용폴리에틸렌과 천연섬유인 목분을 이용하여 이축 압출공 정 방법으로 목분함량이 서로 다른 펠렛을 제조하였다. 이 펠렛을 사용하여 압축성형 방법으로 목분/재활용폴리에틸렌 그린복합재료를 제조하고, 그들의 굴곡특성, 인장특성, 충격특성, 열변형온도 그리고 파단거동에 미치는 목분함량의 영향을 조사하였다. 결과는 목분/재활용폴리에틸렌 그린복합재료의 굴곡강도, 굴곡탄성률, 인장탄성률 및 열변형온도 는 목분함량이 증가함에 따라 크게 향상된 반면, 인장강도와 충격특성은 감소한다는 나타내었다. 주사전자현미경으로 관찰한 파단거동은 재활용폴리에틸렌의 유연한 파단현상과 비교하여 목분함량이 증가함에 따라 변화하는 충격거동 경향을 정성적으로 뒷받침해주었다.
Journal of Information Technology Applications and Management
/
제20권4호
/
pp.315-338
/
2013
As a result of New media that affects the marketing system, it is appeared a new marketing system called Market Platform in terms of market governance of trading. Market Platform is a new marketing system for ideal market system through the community structure from a hierarchy structure. It is determined that Market Platform as the role of adjustment of each side of market, buyer and seller, developed an existing marketing system. In this study, to target the Market Platform has recently emerged as the center of the market management in the new media environment. This study investigates what characteristics and impact of infrastructure of Market Platform will affect the cognitive impact on both buyers and sellers to clarify the impact on the self efficacy of the shopping process. Through this investigation, modeling for the impact that new media environment will attract Market Platform will be developed from the investigation of attractiveness of mobile market platform environment. Changes in the technical media environment gave the characteristics of the customer in the market platform, so consumers could involve not only consumed, but also manufactured. Thus, it is possible to increase the attractiveness if market must be able to not only for the convenience of shopping, but also make people to enjoy the experience of value co-creation. In other words, the new media, as a result of affecting the marketing system, mobile market platform is organized around the market of communication base. Network centrality, visible openness, ubiquitous multiplexity, 3 properties of new media increase the market self-efficacy of their customers. Therefore, the structure of market platform that enhance self-efficacy has higher attractiveness.
In this study, the correlation between microstructure and Charpy impact properties of FCAW(Flux cored arc welding) HAZ(Heat affected zone) of thick steel plates for offshore platforms was investigated. The 1/4 thickness(1/4t) location HAZ specimen had a higher volume fraction of bainite and finer grain size of acicular ferrite than those of the 1/2 thickness (1/2t) location HAZ specimen because of the post heat effect during the continuous FCAW process. The Charpy impact energy at $-20^{\circ}C$ of the 1/4t location HAZ specimen was lower than that of the 1/2t location HAZ specimen because of the high volume fraction of coarse bainite. The Charpy impact energy at -40 and $-60^{\circ}C$ of the 1/2t location HAZ specimen were higher than those of the 1/2t location HAZ specimen because the ductile fracture occurred in the fine acicular ferrite and martensite regions. In the ductile fracture mode, the deformed regions were observed in fine acicular ferrite and martensite regions. In the brittle fracture mode, long crack propagation path was observed in bainite regions.
Hoang, Van Thanh;Luu, Duc Binh;Toan Do, Le Hung;Tran, Ngoc Hai;Nguyen, Pham The Nhan;Tran, Minh Sang;Tran, Minh Thong
한국재료학회지
/
제30권12호
/
pp.650-654
/
2020
A combination of Polycarbonate (PC) material and Polymethylmethacrylate (PMMA), fabricated using an injection molding machine, has been investigated to determine its advantages, as studied in Ref. 1). This paper aims to investigate the optimization of PMMA/PC blend for both tensile yield strength and impact strength. Furthermore, interaction effects of process conditions on mechanical properties including tensile yield strength and impact strength of PMMA/PC blend by injection molding process are interpreted in this study. Tensile and impact specimens are designed following ASTM, type V, and are fabricated by injection molding process. The processing conditions such as melt temperature, mold temperature, packing pressure, and cooling time are applied; each factor has three levels. As a result, in comparison with optimization of separated responses, mechanical properties of PMMA/PC are found to decrease when optimizing both tensile and impact strengths simultaneously. The melt temperature is found to be the most significant interaction parameter with the mold temperature and packing pressure. In addition, there is more interaction between the mold temperature and cooling time. This investigation provides a useful understanding of the control of injection molding processing of polymer blends in optical application.
동해안 지역에서 산불로 고사된 소나무의 5년에 걸친 경시적 재질 변화를 역학성능을 중심으로 조사하였다. 고사에 따른 재질열화로 가장 크게 영향 받는 역학성능은 충격 휨 흡수에너지였다. 따라서 고사 초기의 재질변화를 예측하는 지표로 활용이 가능할 것으로 밝혀졌다. 고사 경과에 따라 변재의 재질열화가 심재에 비해 두드러지게 진행되었다. 열화의 정도는 충격 휨 흡수에너지가 가장 컸으며 압축강도가 가장 작았다. 고사 이후의 외관 변화와 역학성능의 열화진행 정도로 볼 때 산불피해 소나무의 유효한 활용을 위한 적정 벌채 시기는 산불발생 1년 이내가 바람직한 것으로 밝혀졌다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.