• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.519-529
• /
• 2021

This study aims to investigate the impact of Human Resource Management Practices (HRMP) on improving Employee Performance (EP). The study is accomplished by hypothesizing the impact of HRMP on EP, additionally, this impact is theorized to be mediated through job satisfaction. Employee engagement is also taken into account because of the potential moderating effect it has within the theorized model. Data was collected from 480 questionnaires which were distributed among commercial banks' workers in Jordan and were analyzed using structural equation modeling techniques (SEM), path analysis, and confirmatory factor analysis (CFA). Analysis of a moment structures (AMOS) software version 24 was applied to complete our analysis. The results show that HRMP had a positive impact on EP, as well as job satisfaction and its components (job stability and job enrichment). The mediating role of job satisfaction (enrichment and stability) was discovered. Finally, employee engagement emerged as a moderating variable linking HRMP and EP. The findings of this study show the importance of the role played by job satisfaction and employee engagement in achieving human resources performance goals. Future analysis is recommended to gain deeper insight into the relationship between HRMP, job satisfaction, worker training, and performance appraisal.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.367-377
• /
• 2001

Plasma is generated by electrical discharge. Most plasma generation has been carried out at low-pressure gas typically less than one millionth of atmospheric pressure. Plasmas are in general generated from impact ionization of neutral gas molecules by accelerated electrons. The energy gain of electrons accelerated in an electrical field is proportional to the mean free path. Electrons gain more energy at low-pressure gas and generate plasma easily by ionization of neutrals, because the mean free path is longer. For this reason conventional plasma generation is carried out at low pressures. However, many practical applications require plasmas at high-pressure. In order to avoid the requirement for vacuum pumps, researchers in Korea start to develop plasmas in high-pressure chambers where the pressure is 1 atmosphere or greater. Material processing, environmental protection/restoration and improved energy production efficiency using plasmas are only possible for inexpensive bulk plasmas. We thus generate plasmas by new methods and plan to set foundations for new plasma technologies for $21^{st}$ / century industries. This technological research will play a central role in material processing, environmental and energy production industries.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.36.2-36.2
• /
• 2008

This paper presents the impact of Japanese radio source on the S-Band communication between KOMPSAT-2 satellite and TT&C ground system. Major specifications such as transmitting EIRP (Effective Isotropic Radiated Power) and location of Japanese terrestrial station were informed from Radio Research Laboratory in Korea Communication Commission. To estimate path loss in S-Band, the distance between Japanese station and TT&C ground system was obtained by using COTS (Commercial Off-The-Shelf) software. After that the signal strength of Japanese radio source placed at the TT&C ground system was calculated from link parameters such as transmitting EIRP, path loss, and receiving antenna gain. Consequently, this paper shows that the degradation caused by Japanese radio source is acceptable to TT&C ground system for satellite operation.

• Journal of Communications and Networks
• /
• 제10권2호
• /
• pp.156-162
• /
• 2008

Cooperative relays can provide spatial diversity and improve performance of wireless communications. In this paper, we study subcarrier power allocation at the relays for orthogonal frequency division multiplexing (OFDM)-based wireless systems. For cooperative relay with amplify-and-forward (AF) and decode-and-forward (DF) algorithms, we investigate the impact of power allocation to the mutual information between the source and destination. From our simulation results on word~error-rate (WER) performance, we find that the DF algorithm with power allocation provides better performance than that of AF algorithm in a single path relay network because the former is able to eliminate channel noise at each relay. For the multiple path relay network, however, the network structure is already resistant to noise and channel distortion, and AF approach is a more attractive choice due to its lower complexity.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.29-34
• /
• 2012

This study describes the selection of optimum machining conditions for a high-hardness resin by using a large 5-axis machine. The experiments were conducted to examine the main factors that affect the surface roughness, such as the spindle speed, axial and radial depths of the cut, and pattern of the cutter path. To analyze the experiment results, the factor with the biggest impact on machining was determined using the smaller-the-better characteristic of the Taguchi method; the effectiveness of the experiment was then confirmed by verifying the selected optimum machining condition.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.90-96
• /
• 2009

The loading condition of actual construction works is complex. The shear effect of mixed-mode load component are crack propagation mechanism in step larger than the crack initial mechanism. Therefore, in this study received a mixed-mode loading on fatigue crack stress ratio on crack propagation path and speed of progress to learn whether stress affects crack propagation. ${\Delta}$ P a constant state of fatigue tests in Mode I, II give the same stress ratio, frequency 10Hz, sinusoidal waveform was used. A lower stress ratio fatigue crack propagation angle is small. This is less affected by the Mode II. Therefore, a mixed-mode fatigue crack propagation is to progress by the Mode. Stress ratio in a mixed mode crack in the path of progress and found a lot of impact.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1243-1252
• /
• 2004

The purpose of this study was to identify the impact of personal values on fashion orientation. As personal values, this study adopted materialism and consumer conformity. Data were gathered by surveying university students living in Seoul metropolitan area using convenient sampling, and 325 questionnaires were used in the statistical analysis. In analyzing data, confirmatory factor analysis and path analysis were conducted using structural equation modeling. Confirmatory factor analysis revealed that fashion orientation has three factors such as fashion leadership, fashion interest, and importance of being well dressed. Path analysis showed that centrality factor of materialism spurred all three factors of fashion orientation and that happiness factor of materialism gave rise to importance of being well dressed of fashion orientation. Informational conformity also significantly increased all three factors of fashion orientation.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.64-71
• /
• 2009

The development of more safe recliners is an important issue in the automotive industry. However, the development of new recliners is costly and take much time because it is typically based on experimental evaluation using prototypes. This study presents the evaluation of rear crashworthiness for round recliner using finite element method. That reduces the number of repeating test and gives an information about stiffness. To evaluate rear crashworthiness, the FMVSS 301 simulation and pendulum impact simulation were performed. The load path on two simulations was observed and compared each other in this paper. Also stress, strain and internal energy was compared. It is attempted the tooth strength simulation using a substructure option on PAM-CRASH.

• 건축역사연구
• /
• 제31권4호
• /
• pp.29-44
• /
• 2022

This thesis is a study to Haengnang(行廊, a series of buildings) of Sijeon(市廛, licensed markets), which was built along with palaces, Jongmyo(宗廟) and roads in order to establish Hanyang(漢陽) as the capital of Joseon (朝鮮). Sijeon, built on Jongno and Namdaemun-ro, the main roads in Hanyang, created two-row lands on both sides of the road, and formed Pimat-gil as an inner road between the Jeonbang and Doga. The formation of the city proceeded along with the maintenance of the water path, and the situation of the water path parallel to the flow of Sijeon was achieved. The Sijeon building was a spatial structure managed by independent rooms as a result of reflecting the unique operation method of Sijeon. The Sijeon of Hanyang had an impact on the formation of land, architecture, roads, and waterways, and acted as a major factor in determining the urban spatial structure of Hanyang City.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3628-3638
• /
• 2023

This paper uses 135 Licensed Operator Event Reports (LOER) from Chinese nuclear plants to analyze how safety culture affects unsafe behaviors in nuclear power plants. On the basis of a modified human factors analysis and classification system (HFACS) framework, structural equation model (SEM) is used to explore the relationship between latent variables at various levels. Correlation tests such as chi-square test are used to analyze the path from safety culture to unsafe behaviors. The role of latent error is clarified. The results show that the ratio of latent errors to active errors is 3.4:1. The key path linking safety culture weaknesses to unsafe behaviors is Organizational Processes → Inadequate Supervision → Physical/Technical Environment → Skill-based Errors. The most influential factors on the latent variables at each level in the HFACS framework are Organizational Processes, Inadequate Supervision, Physical Environment, and Skill-based Errors.