• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

For the location estimation in the conventional LPMS(Loose Parts Monitoring System), it is popular to employ a group delay among the acoustic sensors installed within a 3 ft range from the impact source. However, there exists inherent error in determining the arrival time differences of the generated wave group among the neighboring sensors. To overcome this problem in this study, the two dimensional approach has been proposed and applied to effectively estimate the arrival time differences by using a continuous wavelet transform which is one of the linear time-frequency analysis methods. The experiment has been performed to both the plate model and the real steam generator in a nuclear power plant. It is expected that the reliability of the location estimation could be enhanced when the proposed time-frequency method is introduced into the LPMS system.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.13-16
• /
• 2005

The mechanical properties of composite materials may degrade severely in the presence of damage. Especially, the high-velocity impact such as bird strike, a hailstorm, and a small piece of tire or stone during high taxing, can cause sever damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single technique or any conventional methods. In this paper, the PYDF(polyvinylidene fluoride) film sensors and strain gages were used for monitoring impact damage initiation and propagation in composite laminates. The WT(wavelet transform) and STFT(short time Fourier transform) are used to decompose the sensor signals. A ultrasonic C-scan and a digital microscope are also used to examine the extent of the damage in each case. This research demonstrate how various sensing techniques, PVDF sensor in particular, can be used to characterize high-velocity impact damage in advanced composites.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.235-239
• /
• 2005

In this research, we investigated the frequency characteristic of low-velocity impact induced damage signals on graphite/epoxy composite laminates using high-speed fiber Bragg grating(FBG) sensor system. Appling the FBG sensors to damage assessment, we need to study the response of FBG sensors as the damage signals of the different incident angles because FBG shows different directional sensitivity. In order to discriminate an impact induced damage signal from that of undamaged case, drop impacts with different energies were applied to the composite panel with different incident angle to the FBG sensor. Finally, detected impact signals were compared using frequency distributions of wavelet detail components in order to find distinctive signal characteristics of composites delamination.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.179-188
• /
• 2015

This study reviewed the type of the project and developmental plan related to ocean energy development in the coastal land boundaries and the ocean, and suggested the efficient scoping method through the diagnosis of the key items of environmental impact assessment (EIA) in the coastal area. The major projects are the construction of tidal power plant, tidal current power plant, and offshore wind power plant in the public water, and also those are the construction of solar power plants in the coastal land boundaries. While the project plans on a large scale such as the construction of tidal power plant, it is important to consider both property of usefulness of the designated areas and harmony analysis with marine space availability based on the adequacy of the site selection and relevance of plan with the master plan for reclamation and strategic environmental assessment (SEA). And also it needs to be considered the careful checkup on the EIA checklist referring to the type of project, effective post-monitoring, and suggestion of mitigating methods to minimize the environmental impacts during the stage of actual environmental impact assessment. Introduction of a system of integrated marine environmental impact assessment should be considered for reasonable and effective manage to developmental projects on the marine spatial area.

• The Research Journal of the Costume Culture
• /
• v.29 no.1
• /
• pp.121-133
• /
• 2021

The purpose of this study was to investigate brand slognas that are effective in explaining how brand identity affects consumers. The effect of congruity between brand slogan and self-image (low and high) on attitude to slogans and brands were anaylzed. The moderating effect of self-monitoring (low and high) was also investigated. Survey data from 177 people in their 20s-30s were analyzed through descriptive statistics, exploratory factor analysis, and two-way ANOVA. First, congruity between slogan and self-image had a positive effect on both slogan and brand attitude. In other words, the higher the congruity between slogan and self-image, the more positive the attitude toward the slogan and brand. Second, no interactive effect was found in congruity between slogan and self-image and self-monitoring on slogan attitude; however it was identified for brand attitude. Again, in a group with high congruity between slogan and self-image, attitude toward the brand was more positive when self-monitoring was higher than when it was low. In conclusion, brand slogans that can represent the self-image of highly self-monitoring consumers are effective. In particular, this is meaningful as it has revealed its relationship with the impact of identity self-image congruity and self-monitoring on brand attitudes in fashion brands. These results offer meaningful guidance in determining brand slogans according to consumers' personal characteristics.

• Structural Monitoring and Maintenance
• /
• v.9 no.4
• /
• pp.359-371
• /
• 2022

Bridges are critical to the civil engineering infrastructure network as they facilitate movement of people, the transportation of goods and services. Given the aging of bridge infrastructure, federal officials mandate visual inspections biennially to identify necessary repair actions which are time, cost, and labor-intensive. Additionally, the expansion joints of bridges are rarely monitored due to cost. However, expansion joints are critical as they absorb movement from thermal effects, loadings strains, impact, abutment settlement, and vehicle motion movement. Thus, the need to monitor bridge expansion joints efficiently, at a low cost, and wirelessly is desired. This paper addresses bridge joint monitoring needs to develop a cost-effective, real-time wireless system that can be validated in a full-scale bridge structure. To this end, a wireless expansion joint monitoring was developed using commercial-off-the-shelf (COTS) sensors. An in-service bridge was selected as a testbed to validate the performance of the developed system compared with traditional displacement sensor, LVDT, temperature and humidity sensors. The short-term monitoring campaign with the wireless sensor system with the internet protocol version 6 over the time slotted channel hopping mode of IEEE 802.15.4e (6TiSCH) network showed reliable results, providing high potential of the developed system for effective joint monitoring at a low cost.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2718-2731
• /
• 2021

In the structural health monitoring of composite materials, in order to solve the ill-posed problem of impact force reconstruction, regularization techniques are often used to deal with it. Due to the poor convergence of the traditional Tikhonov regularization method, in order to accurately reconstruct the time history of the impact force, this paper improves Tikhonov regularization method and constructs homotopy function with strong convergence. Since the optimal regularization parameters need to be found in the homotopy function, the Newton downhill method is used to find the optimal parameters and the homotopy function can be calculated, which can accurately reconstruct the time history of the impact force. In order to verify the universality of the method in this paper, impact hammers of different materials were used in the experiment in this paper to study and compare the reconstruction effect of impact time history of different impact hammers.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.125-128
• /
• 2000

Recently, development of advanced soil monitoring technology has became essential for effective site remediation. Soil gas evaluation is simple and powerful technology which can reduce the environmental impact during the survey of VOC contaminated area. In this research, the feasibility test of SnO$_2$ceramic gas sensor is conducted to improve soil gas measurement technology. As a result, it is successfully proved that this gas sensor has an possibility for soil gas monitoring.

• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.47-54
• /
• 1987

A new method for designing air pollution monitoring newtork is presented in this study. In this method, the magnitudes and the correlation coefficients of predicted concentrations in each grid points are examined and the monitoring stations are assigned to those stations which cover the damage cost the most. This method was applied to the Ulsan-Onsan Industrial Complex. This method turned out to be much more efficient than the method of TM coordinates and the method of concentric circles prescribed in the Standard Methods for Pollution Measurement as well as the existing monitoring system established in the area. The 21 stations selected by the method of TM coordinates could cover only 64.4% of the damage cost in the area, the 16 stations by the method of concentric circles 72.1%, and the existing 21 stations 67.8%, while 11 stations were enough to cover 90% of the damage cost in the area with this method. It also was found that this method required only 24 stations to cover the entire area.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.549-552
• /
• 2004

Since open-cut mining excavates gradually from the top of the mountain, vegetation planting is needed to reduce negative environmental impact on the surrounding environment. Accordingly, this study aimed at performing the environmental monitoring of the open-cut mining ground using the satellite remote sensing technique. As the research technique, in order to grasp the environmental change around the open-cut mining ground, NDVI (normalized difference vegetation index) was calculated, and every year change of the vegetation activity was analyzed. The results of the study showed lower vegetation activity in the open-cut mining ground compared to the surrounding areas and suggested the need for closed monitoring by remote sensing techniques.