• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.311-316
• /
• 2004

For the location estimation in the conventional LPMS(Loose Parts Monitoring System), it is popular to employ a group delay among the acoustic sensors installed within a 3 ft range from the impact source. However, there exists inherent error in determining the arrival time differences of the generated wave group among the neighboring sensors. To overcome this problem in this study, the two dimensional approach has been proposed and applied to effectively estimate the arrival time differences by using a continuous wavelet transform which is one of the linear time-frequency analysis methods. The experiment has been performed to both the plate model and the real steam generator in a nuclear power plant. It is expected that the reliability of the location estimation could be enhanced when the proposed time-frequency method is introduced into the LPMS system.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.13-16
• /
• 2005

The mechanical properties of composite materials may degrade severely in the presence of damage. Especially, the high-velocity impact such as bird strike, a hailstorm, and a small piece of tire or stone during high taxing, can cause sever damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single technique or any conventional methods. In this paper, the PYDF(polyvinylidene fluoride) film sensors and strain gages were used for monitoring impact damage initiation and propagation in composite laminates. The WT(wavelet transform) and STFT(short time Fourier transform) are used to decompose the sensor signals. A ultrasonic C-scan and a digital microscope are also used to examine the extent of the damage in each case. This research demonstrate how various sensing techniques, PVDF sensor in particular, can be used to characterize high-velocity impact damage in advanced composites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.235-239
• /
• 2005

In this research, we investigated the frequency characteristic of low-velocity impact induced damage signals on graphite/epoxy composite laminates using high-speed fiber Bragg grating(FBG) sensor system. Appling the FBG sensors to damage assessment, we need to study the response of FBG sensors as the damage signals of the different incident angles because FBG shows different directional sensitivity. In order to discriminate an impact induced damage signal from that of undamaged case, drop impacts with different energies were applied to the composite panel with different incident angle to the FBG sensor. Finally, detected impact signals were compared using frequency distributions of wavelet detail components in order to find distinctive signal characteristics of composites delamination.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권3호
• /
• pp.179-188
• /
• 2015

본 연구는 연안 육역 및 해역에서 일어나고 있는 해양 신재생에너지 개발계획 및 추진사업을 분석하고, 해양환경 및 생태계와 관련된 중점평가사항을 진단하여 효율적인 스코핑(Scoping) 방안과 정책제언을 제시하였다. 주요한 사업유형으로는 공유수면에는 조력, 해상풍력 및 파력발전이 많았으며, 연안 육역에는 태양광발전사업이 주로 계획되었다. 조력발전 등 대규모 개발사업 추진 시, 상위계획에 따른 전략환경영향평가(SEA)와 공유수면매립기본계획 등 사전평가단계에서는 입지의 타당성과 계획의 적정성 측면에서 연안관리지역계획에 따른 용도구역 등 다른 계획과의 조화, 실질적인 대안분석, 그리고 해양수산 규제지역 분포와 어장이용 등 기 해양공간계획과의 상호 연관성 진단 등이 중요하다. 또한, 해역이용협의나 환경영향평가 등 실시단계에서의 구체적인 평가에서는 사업유형별로 중점평가사항에 대한 철저한 진단, 실효적인 사후모니터링 및 저감방안의 제시가 핵심으로 고려되어야 할 것이다. 특히, 순수하게 해양공간에서 일어나는 에너지발전사업일 경우에는 해양공간계획 방향과 연계되는 사전평가방안 도입 및 통합 "해양환경영향평가" 체제로의 전환 등 해양수산부가 주도하는 평가제도의 개선방안이 필요할 것으로 판단된다.

• 복식문화연구
• /
• 제29권1호
• /
• pp.121-133
• /
• 2021

The purpose of this study was to investigate brand slognas that are effective in explaining how brand identity affects consumers. The effect of congruity between brand slogan and self-image (low and high) on attitude to slogans and brands were anaylzed. The moderating effect of self-monitoring (low and high) was also investigated. Survey data from 177 people in their 20s-30s were analyzed through descriptive statistics, exploratory factor analysis, and two-way ANOVA. First, congruity between slogan and self-image had a positive effect on both slogan and brand attitude. In other words, the higher the congruity between slogan and self-image, the more positive the attitude toward the slogan and brand. Second, no interactive effect was found in congruity between slogan and self-image and self-monitoring on slogan attitude; however it was identified for brand attitude. Again, in a group with high congruity between slogan and self-image, attitude toward the brand was more positive when self-monitoring was higher than when it was low. In conclusion, brand slogans that can represent the self-image of highly self-monitoring consumers are effective. In particular, this is meaningful as it has revealed its relationship with the impact of identity self-image congruity and self-monitoring on brand attitudes in fashion brands. These results offer meaningful guidance in determining brand slogans according to consumers' personal characteristics.

• Structural Monitoring and Maintenance
• /
• 제9권4호
• /
• pp.359-371
• /
• 2022

Bridges are critical to the civil engineering infrastructure network as they facilitate movement of people, the transportation of goods and services. Given the aging of bridge infrastructure, federal officials mandate visual inspections biennially to identify necessary repair actions which are time, cost, and labor-intensive. Additionally, the expansion joints of bridges are rarely monitored due to cost. However, expansion joints are critical as they absorb movement from thermal effects, loadings strains, impact, abutment settlement, and vehicle motion movement. Thus, the need to monitor bridge expansion joints efficiently, at a low cost, and wirelessly is desired. This paper addresses bridge joint monitoring needs to develop a cost-effective, real-time wireless system that can be validated in a full-scale bridge structure. To this end, a wireless expansion joint monitoring was developed using commercial-off-the-shelf (COTS) sensors. An in-service bridge was selected as a testbed to validate the performance of the developed system compared with traditional displacement sensor, LVDT, temperature and humidity sensors. The short-term monitoring campaign with the wireless sensor system with the internet protocol version 6 over the time slotted channel hopping mode of IEEE 802.15.4e (6TiSCH) network showed reliable results, providing high potential of the developed system for effective joint monitoring at a low cost.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2718-2731
• /
• 2021

In the structural health monitoring of composite materials, in order to solve the ill-posed problem of impact force reconstruction, regularization techniques are often used to deal with it. Due to the poor convergence of the traditional Tikhonov regularization method, in order to accurately reconstruct the time history of the impact force, this paper improves Tikhonov regularization method and constructs homotopy function with strong convergence. Since the optimal regularization parameters need to be found in the homotopy function, the Newton downhill method is used to find the optimal parameters and the homotopy function can be calculated, which can accurately reconstruct the time history of the impact force. In order to verify the universality of the method in this paper, impact hammers of different materials were used in the experiment in this paper to study and compare the reconstruction effect of impact time history of different impact hammers.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.125-128
• /
• 2000

Recently, development of advanced soil monitoring technology has became essential for effective site remediation. Soil gas evaluation is simple and powerful technology which can reduce the environmental impact during the survey of VOC contaminated area. In this research, the feasibility test of SnO$_2$ceramic gas sensor is conducted to improve soil gas measurement technology. As a result, it is successfully proved that this gas sensor has an possibility for soil gas monitoring.

• 한국대기환경학회지
• /
• 제3권1호
• /
• pp.47-54
• /
• 1987

A new method for designing air pollution monitoring newtork is presented in this study. In this method, the magnitudes and the correlation coefficients of predicted concentrations in each grid points are examined and the monitoring stations are assigned to those stations which cover the damage cost the most. This method was applied to the Ulsan-Onsan Industrial Complex. This method turned out to be much more efficient than the method of TM coordinates and the method of concentric circles prescribed in the Standard Methods for Pollution Measurement as well as the existing monitoring system established in the area. The 21 stations selected by the method of TM coordinates could cover only 64.4% of the damage cost in the area, the 16 stations by the method of concentric circles 72.1%, and the existing 21 stations 67.8%, while 11 stations were enough to cover 90% of the damage cost in the area with this method. It also was found that this method required only 24 stations to cover the entire area.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.549-552
• /
• 2004

Since open-cut mining excavates gradually from the top of the mountain, vegetation planting is needed to reduce negative environmental impact on the surrounding environment. Accordingly, this study aimed at performing the environmental monitoring of the open-cut mining ground using the satellite remote sensing technique. As the research technique, in order to grasp the environmental change around the open-cut mining ground, NDVI (normalized difference vegetation index) was calculated, and every year change of the vegetation activity was analyzed. The results of the study showed lower vegetation activity in the open-cut mining ground compared to the surrounding areas and suggested the need for closed monitoring by remote sensing techniques.