• 한국기후변화학회지
• /
• 제6권2호
• /
• pp.121-131
• /
• 2015

As the temperature has changed by climate change, changes in its own characteristic values of the chemical substance or the movement and distribution of chemicals take place in accordance with the changes of hydrological and meteorological phenomena. Depending on the impact of climate change on the chemical behavior, it is necessary to understand and predict quantitative changes in the dynamics of the environment of pollutants due to climate change in order to predict in advance the occurrence of environmental disasters, and minimize the impact on the life and the environment after the incident. In this study, we have analysed and compared chemical fate models validated by previous studies in terms of model configuration, application size and input/output factors. The potential models applicable to municipal and industrial areas were selected on the basis of characteristic of each model, availability of input parameters and consideration for climate change, identified the problems, and then presented an approach to improve applicability.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.21-32
• /
• 2002

말뚝 선단 조건에 따른 충격반향기법의 시간영역 신호를 실내 모형실험에 의하여 분석하였다. 선단조건으로는 자유단, 고정단, 암반 근입, 연약 선단부의 네 가지 조건을 고려하였으며, 이를 위하여 폴리우레탄 재질의 모형말뚝과 모노캐스트 재질의 모형암반을 제작하여 실험을 수행하였다. 실내실험 결과 각각의 경계조건에 대한 신호의 특성을 파악할 수 있었으며, 말뚝 선단 조건뿐만 아니라 말뚝과 주변 암반과의 부착상태도 추정할 수 있는 가능성을 확인하였다. 또한 실내 모형실험의 결과를 검증하기 위하여 현장실험을 수행하였으며, 암반 근입 말뚝에 대한 신호 분석 결과 충격반향기법에 의한 현장타설말뚝의 비파괴 건전도 평가는 적용성이 충분히 있는 것으로 파악되었다.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1842-1847
• /
• 2006

본 연구에서는 환경 영향평가를 위한 도로설계단계에서부터 가상현실기 법으로 현실감을 고려한 도로설계기 법에 관한 연구로 3차원 모델의 구축과 시뮬레이션을 통한 가시 화 방법을 제시하였다. 제작된 3차원 모델은 도로공사 후의 모습을 시각적으로 극대화 시켜서 효율적으로 보여주는 수단이 될 것이다. 수치지도와 항공사진으로 생성된 다면체 모델을 구성하는 중요 구조물을 실제질감을 매핑하여 작업하였으므로 사실감을 더욱 높일 수 있었다. 본 연구를 기반으로 도로 노선으로 인한 장기간의 소모적인 협의기간을 단축하고 현행 환경 영향평가에서는 사후적인 측면에서 구체적이고 다양한 저감대책을 심도 있게 다루어 보다 현실적으로 발전한 경관을 고려한 도로가 건설될 수 있도록 해야 할 것이다.

• 소음진동
• /
• 제5권4호
• /
• pp.515-524
• /
• 1995

Tubes in heat exchanger of fuel rods in reactor core are supported at intemediate point by support p0lates or springs. Current practice is, in case of heat exchanger, to allow clearance between tube and support plate for design and manufacturing consideration. And in case of fuel rod the clearance in support point can be generated due to the support spring force relaxation. Flow-induced vibration of a tube can cause it to impact or rub against support plate or against adjacent tubes and can result in fretting-wear. The tube-to- support dynamic interaction is used to relate experimental wear data from single-span test rigs to real multi-span heat exchanger configurations. The dynamic interaction cna be measured during experimental wear tests. However, the dynamic interaction is difficult to measure in real heat exchangers and, therefore, analytical techniques are required to estimate this interaction. This paper describels the nonlinear impact model of DAGS(Dynamic Analysis of Gapped Structure) code which simulates the tube response to external sinusodial or step excitation and predicts tube motion and tube-to-support dynamic interaction. Three experimental measurements-two single span rods excited by sinusodial force and a two span rod impacted by a steel ball are compared from the simulation nonlinear model of DAGS code. The simulation results from DAGS code are in good agreement with measurements. Therefore, the developed model of DAGS code is good analytical tool for estimating tube-to-support dynamic interaction in real heat exchangers.

• 환경영향평가
• /
• 제16권6호
• /
• pp.381-391
• /
• 2007

The air quality modeling was carried out to assess the impact of air quality for large scale urban development. The site for the assessment is Multi-fuctional Administrative City which locates in Yeongi-gun, Chungcheongnam-do and estimated population in 2030 is 500,000. Two automatic weather monitoring stations were installed to monitor the meteorological variables for a year and upper air meteorological parameters were measured using radiosonde for 5 days with 4 hours interval in every season. The air quality of standard air pollutants were also measured for 5 days continuously in every season. The results of wind field analysis based on the site measurements and CALMET modeling showed that the valley and mountain winds were prevailed when the sypnotic wind was weak. It also showed that wind speed and directions were highly space-variable within the site basin. The variable wind characteristics implies that the Gaussian dispersion model such ISC3 and AERMOD are not appropriate and the unsteady-sate Lagrangian model such as CALPUFF is preferable. CALPUFF model was applied to assess air quality impact of new sources. The new sources were those for individual and group heating facilities as well as the traffic increases. The results showed that the estimated concentrations of CO and $SO_2$ pollutants by summing the impact concentration of new sources by the dispersion model and the ambient air concentrations by the site measurements were acceptable but those of PM-10 and $NO_2$ would violate ambient air quality standards at several locations due to high ambient air concentrations. It is recommended that the emission reductions near the site should be enforced to improve the ambient air quality.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.1-10
• /
• 2017

Various offshore structures such as FPSO, FSO, Semi-submersible, TLP and Spar are operated to develop offshore oil and gas fields. Most of the offshore structures shall be operated over 20 years under the harsh environments at sites so that the offshore structures should be designed to endure the harsh environments. In this study, the effect of the impact load (so called slapping load) by the steep waves acting on the FPSO bow is investigated through the model test. For measurement of the impact pressures on the frontal area, a bow-shaped panel was fabricated, and installed the pressure sensors on the bow starboard side of the model FPSO. During the model test campaign, the impact load was investigated using the steep waves with $Hs/{\lambda}$ greater than 1/16 of the representative wave condition. Consequently, it is confirmed through the model test that the impact loads acting on the FPSO bow are significantly increased with the steep waves ($Hs/{\lambda}$ > 1/16) than the representative wave conditions of a maximum significant wave height and a pitch forcing period. Therefore, for safe design of North Sea FPSO, it is necessary to consider the steep waves in addition to the representative wave conditions and to be applied as proper structural load. Also, the effect of random seeds in irregular waves should be considered to build the safe FPSO.

• 환경영향평가
• /
• 제20권3호
• /
• pp.357-365
• /
• 2011

The QUAL2K has the same basic characteristics as the QUAL2E model, which has been widely used in stream water quality modeling; in QUAL2K, however, various functions are supplemented. The QUAL2Kw model uses a genetic algorithm(GA) for automatic calibration of QUAL2K, and it can search for optimum water quality parameters efficiently using the calculation results of the model. The QUAL2Kw model was applied to the Gangneung Namdaecheon River on the east side of the Korean Peninsula. Because of the effluents from the urban area, the middle and lower parts of the river are more polluted than the upper parts. Moreover, the hydraulic characteristics differ between the lower and upper parts of rivers. Thus, the river reaches were divided into seven parts, auto-calibration for the multiple reaches was performed using the function of the user-defined automatic calibration of the rates worksheets. Because GA parameters affect the optimal solution of the model, the impact of the GA parameters used in QUAL2Kw on the fitness of the model was analyzed. Sensitivity analysis of various factors, such as population size, crossover probability, crossover mode, strategy for mutation and elitism, mutation rate, and reproduction plan, were performed. Using the results of this sensitivity analysis, the optimum GA parameters were selected to achieve the best fitness value.

• 한국컴퓨터정보학회논문지
• /
• 제26권12호
• /
• pp.11-18
• /
• 2021

본 논문에서는 함포 사격 정확도를 향상시키기 위해 표적 위치 예측과 사격 오차 도출에서의 딥러닝 알고리즘 적용 가능성을 연구하였다. 표적 위치 예측 시 딥러닝 알고리즘의 하나인 LSTM 모델과 RN 구조를 적용했을 때 좀 더 정밀한 표적 위치를 예측할 수 있다는 가능성을 확인하고 모델을 설계하였다. 사격 오차 도출 시 사격제원 계산에 영향을 끼치는 요소들을 데이터 셋으로 관리하며, GAN을 사용하여 데이터 셋을 생성 후 강화 학습을 진행하여 사격 오차를 줄일 수 있는 모델을 설계하였다. 2가지 모델을 결합하여 사격 정확도를 향상시키기 위한 딥러닝 기반의 사격제원 계산 모델을 설계하였다.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.89-97
• /
• 2006

An inviscid axisymmetric model capable of predicting droplet bouncing and the detailed pre-impact motion, influenced by the ambient pressure, has been developed using boundary element method (BEM). Because most droplet impact simulations of previous studies assumed that a droplet was already in contact with the impacting substrate at the simulation start, the previous simulations could not accurately describe the effect of the gas compressed between a failing droplet and the impacting substrate. To properly account for the surrounding gas effect, an effect is made to release a droplet from a certain height. High gas pressures are computationally observed in the region between the droplet and the impact surface at instances just prior to impact. The current simulation shows that the droplet retains its spherical shape when the surface tension energy is dominant over the dissipative energy. When increasing the Weber number, the droplet surface structure is highly deformed due to the appearance of the capillary waves and, consequently, a pyramidal surface structure is formed; this phenomenon was verified with our experiment. Parametric studies using our model include the pre-impact behavior which varies as a function of the Weber number and the surrounding gas pressure.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2002

물체가 수중에 입수할 때, 원래의 운동에너지는 물체와 그 주위의 물에 부가질량 형태로 분배된다. 이러한 에너지 혹은 운동량의 전달에 기인하여 물체는 유체동력학적 충격력과 가속도를 받는다. 이러한 충격거동은 수중운동체의 공중 발사에 중요한 고려 요인이 된다. 본 논문에서는 구명정 모델을 바탕으로 원통형 물체의 입수에 대한 충격거동을 해석하는 근사기법을 제안하였다. 충격력은 von Karman의 운동량 이론으로 계산하고, 운동, 특히 가속도는 유체동력학적 힘의 평형에 의하여 유도된 운동방정식의 수치 적분으로 계산하였다. 제안된 방법은 입수충격을 받는 물체의 초기설계나 운동 해석을 위한 단순하면서도 효과적인 방안이 될 수 있을 것으로 기대된다.