• Smart Structures and Systems
• /
• 제24권1호
• /
• pp.83-94
• /
• 2019

Passive negative stiffness dampers (NSDs) that possess superior energy dissipation abilities, have been proved to be more efficient than commonly adopted passive viscous dampers in controlling stay cable vibrations. Recently, inertial mass dampers (IMDs) have attracted extensive attentions since their properties are similar to NSDs. It has been theoretically predicted that superior supplemental damping can be generated for a taut cable with an IMD. This paper aims to theoretically investigate the impact of the cable sag on the efficiency of an IMD in controlling stay cable vibrations, and experimentally validate superior vibration mitigation performance of the IMD. Both the numerical and asymptotic solutions were obtained for an inclined sag cable with an IMD installed close to the cable end. Based on the asymptotic solution, the cable attainable maximum modal damping ratio and the corresponding optimal damping coefficient of the IMD were derived for a given inertial mass. An electromagnetic IMD (EIMD) with adjustable inertial mass was developed to investigate the effects of inertial mass and cable sag on the vibration mitigation performance of two model cables with different sags through series of first modal free vibration tests. The results show that the sag generally reduces the attainable first modal damping ratio of the cable with a passive viscous damper, while tends to increase the cable maximum attainable modal damping ratio provided by the IMD. The cable sag also decreases the optimum damping coefficient of the IMD when the inertial mass is less than its optimal value. The theoretically predicted first modal damping ratio of the cable with an IMD, taking into account the sag generally, agrees well with that identified from experimental results, while it will be significantly overestimated with a taut-cable model, especially for the cable with large sag.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.5-10
• /
• 2011

MTG(Micro turbine generator) operating at 400,000 rpm is under development and the impact test rig to measure the dynamic stiffness and damping coefficient of air foil bearing for high speed rotor is presented in this study. The stiffness and damping coefficient of air foil bearing depending on the rotational speed can be measured easily and effectively by using the simple configuration of impact test rig which is composed of air gun, gap sensors and high speed motor. The estimation results of stiffness and dampling coefficient using least square estimation method is presented as well.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.288-297
• /
• 1990

The method of analyzing flexible mechanisms with clearances was studied considering flexibility of beams in the mechanism using finite elements. Both ends of a beam were modeled as free following Dubowsky's impact pair model. Instead some force constraints were imposed at imposed at the connections between adjoining links. Coulomb model has been developed using dry frictions in place of tangential damping forces in the impact pair model and the contact compliance and damping coefficient approximated in a form of root function were used. As examples, impacts of a rigid ball in a cylinder, impact beam model and four-bar mechanisms made up of three flexible links with clearance connections were simulated numerically. The results from examples showed similar but a little bit smaller magnitude of impact forces compared with published studies.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.262-271
• /
• 2004

Hydropneumatic suspension unit is an important part of tracked vehicles to absorb external impact load exerted from the non-paved road and the cannon discharge. Its absorption performance is strongly influenced by both damping and spring forces of the unit. In this paper, we numerically analyze the damping characteristics of the in-arm-type hydropneumatic suspension unit (ISU) by considering four distinct dynamic modes of the ISU damper: jounce-loading, jounce-unloading, rebound-loading and rebound-unloading. The flow rate coefficients determining the oil flow rate through the damper orifice are decided with the help of independent experiments. The wheel reaction force, the flow rate at cracking and the damping energy are parametrically investigated with respect to the orifice diameter and the wheel motion frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.345-348
• /
• 2004

In this paper it is to establish a comprehensive model for predicting damping in sandwich Laminated composites on the basis of strain energy method. In this model, the effect of transverse shear on the material damping has been considered with in-plane stresses. Results showed that the viscoelastic core thickness in the sandwich beam and the Length of a beam have a high impact on the material damping. The transverse shear appears to be highly influenced by the damping behavior in $0^0$ laminated sandwiched composites. However, it is Little influenced by that in $90^0$ laminated sandwiched composites.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.43-52
• /
• 1999

In this study, the vibration damping characteristics of the powered hand tools transmitted in hand-arm system were examined and compared. The types of powered tools for the experiment are general typed drill, impact drill, grinder, and wire brush. To analyze the characteristics of vibration damping, the magnitude of acceleration of vibration on X, Y, and Z direction at tool, hand, wrist, and the joint between forearm and upper arm were measured respectively. The results indicated that impact drill generated the highest value of acceleration of vibration among the four types of tools used in the experiments. The highest value of the amount of acceleration of vibration was found in the direction of Y. And the amount of acceleration of vibration was significantly affected by the type of tool, type of work, and pushing forces. As become the more distant from the tool, the smaller the amount of acceleration of vibration. Also, the bigger the pushing force at the tool, the higher the acceleration of vibration.

• 한국지진공학회논문집
• /
• 제10권5호
• /
• pp.49-61
• /
• 2006

본 연구의 목적은 방진층을 가진 바닥판을 포함한 건축물의 동적해석을 위하여 효율적인 모형화 방법과 이에 대한 해석법을 제안하는 것이다. 이를 위하여 방진층을 포함한 바닥판의 모형화를 위하여 바닥슬래브와 상부 마감층을 각각 독립적으로 모형화하고 이들 사이에 방진층을 의미하는 스프링 요소를 사용하였으며 방진층의 감쇠에 의한 비비례 문제를 해결하기 위하여 $Newmark-{\beta}$법을 적용하여 동적해석을 수행하였다. 상하부를 각각 모형화함으로서 방진층 상하부의 재료적 차이에 의한 감쇠거동을 정확하게 모형화할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1065-1070
• /
• 2006

The beam structure models with an impactor or contact parts under impact forces have teen applied to the design of mechanical and electronic accessories. Switches, hard-disk pick-ups and sensors are typical structural examples of the structure to be designed to colliding with other parts of structures. In this paper, in order to examine the relationships between the changes of the stiffness and damping of the impactor and vibrations of the dynamic characteristics of the impact model of a cantilevered beam with an impactor, impact force of the impactor and response characteristics of the cantilevered beam were analyzed by both numerical simulation and experiment. Since the stiffness and damping of the impactor have high nonlinear characteristics, the contact model using revised Herz-model was established by experiments. Also, the results of numerical analyses for dynamic response and impact force of a cantilevered beam with an impactor have a good agreement with experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.349.1-349
• /
• 2002

This paper presents investigation of damping characteristics of squeeze mode type MR mount experimently. The MR mount proposed in the study has variable damping characteristics according to the applied magnetic field strength. Impact and force excitation tests were performed. The dynamic property of the mount using MR fluid was compared with that of the mount using conventional oil. (omitted)

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.23-29
• /
• 2002

Recent construction activities have given rise to civil petitions associated with vibration-induced damages or nuisances. To mitigate unfavorable effects of construction activities, the measures to reduce or isolate from vibration need to be adopted. In this research, a vibration-mitigated concrete, which is one of the active measures for reducing vibration in concrete structures, was investigated. Concrete was mixed with vibration-reducing materials (i.e. latex, rubber power, plastic resin, and polystyrofoam) to reduce vibration and tested to evaluate dynamic material properties and structural characteristics. Normal and high strength concrete specimens with a certain level of damage were also tested for comparisons. In addition, recycling tires and plastic materials were added to produce a vibration-reducing concrete. A total of 32 concrete bars and eight concrete beams were tested to investigate the dynamic material properties and structural characteristics. Wave measurements on concrete bars showed that vibration-mitigated concrete has larger material damping ratio than normal or high strength concrete. Styrofoam turned out to be the most effective vibration-reducing mixture. Flexural vibration tests on eight flexural concrete beams also revealed that material damping ratio of the concrete beams is much smaller than structural damping ratio for all the cases.