• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.519-523
• /
• 2008

Poisson's ratio is one of elastic constants of elastic solids. However, it has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Hard couplant for transverse wave prevents transducer from scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was proposed. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected. Transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio can be determined without information of specimen thickness. This technique was demonstrated for aluminum and steel specimens.

• Korean Journal of Mathematics
• /
• 제18권4호
• /
• pp.409-424
• /
• 2010

We observed the symptoms that occur to students who dislike mathematics when they study mathematics and the data that mathematics is related to foreign language. This study investigated the relation between mathematics and foreign language. Continuous immersion aids not only in acquiring language but also in learning mathematics. For continuous immersion, it is essential to organize small class. We organized small class and compared large class with small class about how the relation between mathematics and language appears in achievement, rate of presence, rate of submission of report, and attitude and enthusiasm. Based on the result, we try to find out the way to increase understanding mathematics and level up the achievements.

• Advances in aircraft and spacecraft science
• /
• 제2권3호
• /
• pp.249-261
• /
• 2015

The mechanical characterization of composite materials is nowadays a major interest due to their increasing use in the aeronautic industry. The design of most of these materials is based on their stiffness, which is mainly obtained by means of tensile tests with strain gauge measurement. For thin laminated composites, this classical method requires adequate samples with specific orientation and does not provide all the independent elastic constants. Regarding ultrasonic characterization, especially immersion technique, only one specimen is needed and the entire determination of the stiffness tensor is possible. This paper presents a study of different methods to determine the mechanical properties of transversely isotropic carbon fibre composite materials (gauge and correlation strain measurement during tensile tests, ultrasonic immersion technique). Results are compared to ISO standards and manufacturer data to evaluate the accuracy of these techniques.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.78-81
• /
• 2011

We demonstrate a high-spatial-resolution imaging and spectroscopy tool using a solid immersion lens (SIL), a hemispherical lens made of high refractive index glass (n ~2). Photoluminescence (PL) images of single CdSe nanocrystals confirm a numerical aperture enhancement factor of ~2, close to the refractive index of the SIL. In particular, a bare-eye observation of PL signals emitted by single nanocrystals with ${\sim}10\;{\mu}m^{-2}$ densities was possible over an ${\sim}30\;{\mu}m$ diameter region. In addition, the PL spectra of single CdSe nanocrystals were successfully measured at room temperature. Thus, this SIL microscope ensures a simple but powerful method for nanostructure spectroscopy.

• 한국식품과학회지
• /
• 제21권6호
• /
• pp.735-741
• /
• 1989

For the accurate prediction of freezing time, probably the most difficult factor to measure and major error source is the surface heat transfer coefficient. In this work, surface heat transfer coefficient were determined for still air freezing and immersion freezing methods by theory of the transient temperature method and confirmed by using a modification of plank's equation to predict the freezing time of ground lean beef. The results showed the cooling rate of immersion freezing was about 11 times faster than that of still air freezing method. A comparison of surface heat transfer coefficient of copper plate and ground lean beef resulted an difference of 25-30% because the food sample surface is not smooth as copper plate. Also, when h-values measured by ground lean beef were applicated to modified model, the accuracy of its results is very high as difference of about 8%.

• 방사성폐기물학회지
• /
• 제20권3호
• /
• pp.297-306
• /
• 2022

The acoustic emission (AE) is proposed as a feasible method for the real-time monitoring of the structural damage evolution in concrete materials that are typically used in the storage of nuclear wastes. However, the characteristics of AE signals emitted from concrete structures subjected to various environmental conditions are poorly identified. Therefore, this study examines the AE characteristics of the concrete structures during uniaxial compression, where the storage temperature and immersion conditions of the concrete specimens varied from 15℃ to 75℃ and from completely dry to water-immersion, respectively. Compared with the dry specimens, the water-immersed specimens exhibited significantly reduced uniaxial compressive strengths by approximately 26%, total AE energy by approximately 90%, and max RA value by approximately 70%. As the treatment temperature increased, the strength and AE parameters, such as AE count, AE energy, and RA value, of the dry specimens increased; however, the temperature effect was only minimal for the immersed specimens. This study suggests that the AE technique can capture the mechanical damage evolution of concrete materials, but their AE characteristics can vary with respect to the storage conditions.

• 방송공학회논문지
• /
• 제26권5호
• /
• pp.500-507
• /
• 2021

가상현실 산업은 Covid-19 이후 비대면 콘텐츠 수요 급증과 메타버스에 대한 관심과 더불어 재도약할 기회를 얻었다. 따라서 이러한 흐름과 함께 가상현실 콘텐츠를 대중화를 위해서는 양질의 콘텐츠 제작과 가상현실 특성에 맞는 스토리텔링 연구가 지속적으로 이루어져야 한다. 이처럼 가상현실 특성을 적용한 콘텐츠가 사용자 피드백을 통해 효과적으로 제작되기 위해서는 해당 콘텐츠를 평가할 수 있는 정량적 지표가 필요하다. 본 연구에서는 가상현실 콘텐츠를 관람하는 과정을 분석하여 머리 움직임을 정량적 지표로 설정하였다. 이후 실험자는 5개 애니메이션을 관람하고 이에 따라 기록된 머리 움직임 정보와 몰입도 간의 상관관계를 분석하였다. 분석 결과는 머리 움직임 속도가 상대적으로 느릴 때 높은 몰입도를 나타내었고, 머리 움직임 속도가 콘텐츠 몰입도 정도를 나타내는 지표로 유의미하게 사용될 수 있다는 것을 알 수 있었다. 이렇게 도출된 결과는 이후 창작자가 가상현실 콘텐츠 제작을 할 때 프로토타입 제작 후 적용된 스토리텔링 방식의 유효성을 검증할 수 있는 정량적 지표로 사용될 수 있다. 이러한 방식은 제안된 스토리텔링 방식 문제점을 빠르게 파악하고 더 나은 방식을 제안할 수 있어 콘텐츠의 질을 향상시킨다. 본 연구는 머리 움직임 속도라는 정량적 지표를 기반으로 몰입도를 분석하는 기초연구로 양질의 가상현실 콘텐츠 제작과 가상현실 콘텐츠 대중화에 기여하고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.97-105
• /
• 1998

This study examined the combined using effects of urea-formaldehyde (UF) resin and emulsifiable methylene diphyenyl diisocyanate (EMDI) resin to overcome performance limit of three-layer particleboards commonly made by UF resin. Two adhesive adding methods were applied with three types of resin combination system to each layer of particleboards. The one was simultaneously spreading method with emulsified compound resin (UF and EMDI) while the other was separately spreading method with unemulsified EMDI resin after UF resin spreading. The performance of particleboards bonded with 2% EMDI resin to the inner layers(IL) were similar to that of controls bonded with 8% UF resin. In the case of the emulsified compound resin application to the all layers of particleboards, there were marked reinforcing effects of EMDI resin, although a small amount of EMDI resin was mixed with UF resin. Especially bending MOR after 24 hours cold water-immersion and thickness swelling after 2 hours hot water-immersion of compound resin-bonded particleboards were remarkably different from those of pure UF resin-bonded particleboards. It was found that separately spreading method with unemulsified EMDI resin was more effective than simultaneously spreading method with emulsified compound resin to sustain the internal bond strength of particleboards after 24 hours cold water-immersion. In the resin combination systems to outer layers/inner layers of particleboards, water resistance and strength properties were superior in order of UF+EMDI/UF+EMDI > UF/UF+EMDI > UF/UF. And water resistance of particleboards was greatly dependent upon EMDI resin level in any adhesive adding method.

• 사상체질의학회지
• /
• 제10권1호
• /
• pp.143-160
• /
• 1998

연구목적 한국인 성인남녀를 대상으로한 신체분절에 관한 사상의학적 연구이다. 생체를 8-10분절로 분획하고 인체계측 및 침수법(Immersion Method) 및 평형측정판법(Reaction Board Method)을 이용하여 각 신체분절의 생체역학적 특성을 사상체질별로 객관화한다. 연구대상 연구대상자는 한국인 성인으로 남자 49명 여자 23명으로 총72명이며, 평균연령은 $29.4{\pm}8.54$세이고 태음인 30명, 소양인 17명, 소음인 25명이었다. 연구방법 인체계측항목중 신체분절길이 및 둘레와 골폭 및 스킨폴드 두께는 Lohman 등(1988)의 인체계측 부위 및 방법에 따라 42개 항목과 사초부위의 9항목으로 총 51개 항목을 측정하였다. 사지의 측정은 우측을 선택하였다. 침수법에 의하여 부피를 측정하고 밀도공식에 의하여 질량을 산출하였고, 평형측정판법에 의하여 무게중심을 구하였다. 연구결과 1. 인체계측항목에서 살펴보면 남자의 경우 둘레에서 체질별로 유의한 차이가 있었다. 2. 체적에서 살펴보면 남자의 경우 태음인과 소음인에서 유의한 차이가 있었고, 특히 두경부, 손, 발의 경우 태음인이 가장 작은 비율을 나타냈고 소음인이 가장 컸다. 3. 무게중심은 남자의 경우 소양인이 다른체질에 비하여 위에 있었다.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.146-153
• /
• 1997

An experiment was conducted to figure out the atomization characteristics of a highly viscous biodiesel fuel with rice-barn oil applying and ultrasonic energy into it. A spray simulator for the droplet atomization, an ultrasonic system, and six different nozzles(3 pintle-type nozzles and 3 single hole-type nozzles) were made. To investigate effects of ultrasonic energy in a highly viscous liquid fuel, an immersion liquid method was used as a measurement method on droplet size distributions. It was found that the ultrasonic energy was effective for the atomization improvement of the rice-bran oil as a highly viscous biodiesel fuel and the factor나 such as the nozzle opening pressure, pin-edge angles, hole diameters, and collection distances affected the atomization of spray droplets.