• International journal of advanced smart convergence
• /
• 제7권2호
• /
• pp.135-142
• /
• 2018

Virtual reality (VR) technology has been increasingly more frequently used day by day in industries, entertainment and performances due to the development of AR and MR technologies. Performance arts also actively utilize $360^{\circ}$ VR technology due to the free expression of stage settings and auditoriums. However, technologies for systems in which performers wear VR devices firsthand rather than being in the sandpoint of bystanders while audiences wear VR head mounted displays(HMDs) to see performance stages have been rarely studied yet. This study investigated the technical possibilities of possible methods of expression that will enable performers to appear on the stage wearing VR devices. Since VR can maximize the sense of immersion with its closed HMD structure unlike augmented reality (AR), VR was judged to be suitable for studies centered on the mental interactions in the inner side of humans. Among them, to implement shamanistic expression methods with the phantoms of the body and soul, a motion capture technology linked with VR display devices and real-time cameras was realized on the stage. In this process, the importance of body ownership experienced by the performers (participants), reactions when they lost it, and the mental phenomena of the desire to possess the subjects of gaze could be seen. In addition, high possibility of development of this technology hereafter could be expected because this technology includes the technical openness that enables the audience to appear on the stage firsthand to become performers.

• Preventive Nutrition and Food Science
• /
• 제13권4호
• /
• pp.266-268
• /
• 2008

The antimicrobial effect of acidified sodium chlorite (ASC) solution on whole croaker skin was evaluated. Whole croaker skin was treated with ASC (50, 100, 200, 400, and 600 ppm) and distilled water. After 10-minute exposure to 600 ppm ASC, 8% of Gram-negative bacteria survived on the whole croaker sample. Treatment with 50 ppm ASC eliminated all coliforms in the initial load. Immersion treatment with 600 ppm ASC resulted in $1.3\;log\;CFU/cm^2$ greater kill of the initial mesophile loads of control ($2.8\;log\;CFU/cm^2$) than distilled water. Fifty ppm ASC solution produced a 1.6-log reduction of psychrotrophic bacteria. ASC treatment was an effective method for reducing naturally occurring microflora on whole croaker skin.

• 한국생활과학회지
• /
• 제14권6호
• /
• pp.961-972
• /
• 2005

The purpose of this study is to investigate the improvement of English proficiency of children in the ESL and EFL learning style classrooms through the experiment method. The results of this research are as follows: first, the scores of listening and speaking and the perception of alphabets in the ESL program are higher than that in the EFL program. This means that learning in the ESL style classroom is the better way to improve English skills than in the EFL style classroom, which is common in Korea. Second, there is no difference in the English listening and speaking skills and the perception of the English alphabets between the two gender groups in the ESL & EFL style classrooms. These results suggest that the target language may be used in the English classrooms by the teachers and the students with the materials, books, and equipment are English. Teachers are expected to be in charge of playing decisive roles as demonstrators of speech, models and correctors of pronunciation and providers of materials including TV, VCR, CD players, and cassette recorders, etc.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.245-250
• /
• 2004

This paper proposes a new method of measuring an air interface distance between a solid immersion lens(SIL) applied magneto-optic technology and the disk surface. For applying near-field recording (NFR) technology to the magneto-optic storage devices for the next generation, it is positively necessary to maintain the small air gap under about 100㎚. We design an apparatus that consists of some optical components such as a prism, a polarizer and an analyzer. By using the Fresnel reflection coefficient equation, Jones matrices calculation and Malus's law, we establish a mathematical model for understanding the characteristics of the system. The simulations are based on the mathematical model and through the simulation results which is made with various cases we can estimate the performance of the new optical gap sensor system. Experimental results, which are also based on the mathematical model for specific cases, are in good agreement with simulated ones and demonstrate the possibility as the new optical gap sensor.

• 한국재료학회지
• /
• 제17권11호
• /
• pp.622-627
• /
• 2007

Porous poly(e-caprolactone) (PCL) scaffolds were fabricated by salt leaching method. The PCL scaffolds were treated with aqueous NaOH for 0h, 2h, 4h, 8h, and 12h at $40^{\circ}C$. The NaOH-treated PCL scaffolds were dipped in $CaCl_2$ and $K_2HPO_4{\cdot}_3H_2O$ solution alternately three times to induce apatite nuclei onto the surface of the scaffolds. The NaOH-treated PCL scaffolds were immersed into SBF solution for 1day to grow the apatite. The apatite formation were investigated as a fuction of NaOH treatment time. The hydrophilicty and surface area of the PCL scaffolds were increased with NaOH-treatment time. The NaOH-treated PCL scaffolds were successfully formed a dense and uniform bone-like apatite layer after immersion for 1 day in SBF solution.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.217-225
• /
• 1999

The effect on the pitting corrosion resistance of laser welding and surface treatment developed as a repair method of stream generator tubing material that was a major component of primary system at nuclear power plant was observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface melted and the microstructural characteristics were examined. The pitting corrosion resistance was examined through Ep(pitting potential) and degree of pit generation by means of the electrochemical tests and the immersion tests respectively. The pit formation characteristics were investigated through microstructural changes and the pit initiation site and pit morphology. The test results showed that the pitting corrosion resistances was increased in the order of the followings; sensitized Alloy 600, solution annealed alloy600, and laser surface melted Alloy 600. Pits were initiated preferably at Ti-containing inclusions and their surroundings in all tested specimens and it is believed that higher pitting resistance of laser-surface treated Alloy 600 was caused by fine, homogeneous distribution of non-soluble inclusions, the disappearance of grain boundary, and the formation of dense, stable oxide film. The major element of corrosion products filled in the pit was Cr. On the other hand, Fe was enriched in the deposit formed on the pit.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.58-66
• /
• 2005

Pseudo-Near Field Recording (Pseudo-NFR) system is proposed to prevent contamination and oxidation of media surface occurred in conventional NFR systems. To solve these critical problems of the NFR systems, we investigate the optimal thickness of cover layer for Pseudo NFR. This paper presents the theoretical analysis for cover layer thickness based on the measured length of dust particle and numerical simulation for the temperature distribution using Finite Difference Time Domain (FDTD) method and heat conduction equation. To verify the simulation results, we conduct and compare simulation results in case of far field MO recording and near field MO recording. A measured dust particle length in general environment was mostly less than $20{\mu}m$, and the optimal thickness of cover layer is $30{\mu}m$ in this case. Based on the designed optimal cover layer thickness, temperature distribution is simulated to have $800{\~}850^{\circ}C$.

• 센서학회지
• /
• 제25권5호
• /
• pp.365-370
• /
• 2016

The study about VR (Virtual Reality) has been done from the 1960s, but technical limits and high cost made VR hard to commercialize. However, in recent, high resolution display, computing power and 3D sensing have developed and hardware has become affordable. Therefore, normal users can get high quality of immersion and interaction. However, HMD devices which offer VR environment have high latency, so it disrupts the VR environment. People are usually sensitive to relative latency over 20ms. In this paper, as adding the Electromyogram (EMG) sensors to typical IMU sensor only system, the latency reduction method is proposed. By changing software and hardware components, some cases the latency was reduced significantly. Hence, this study covers the possibility and the experimental verification about EMG sensors for reducing the latency.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.557-562
• /
• 2004

A surface-piercing barrier model is presented for understanding morphological development in the sheltered region and investigating the main factors causing the severe accumulation. Surface-piercing structures like vertical barriers, surface docks and floating breakwaters are recently favored from the point of view of a marine scenario since they do not in general partition the natural sea. The numerical solutions are compared with experimental data on wave profiles and morphological change rates within a rectangular harbor of a constant depth protected by surface-piercing thin breakwaters as a simplified problem. Our numerical study involves several modules: 1) wave dynamics analyzed by a plane-wave approximation, 2) suspended sediment transport combined with sediment erosion-deposition model, and 3) concurrent morphological changes. Scattering waves are solved by using a plane wave method without inclusion of evanescent modes. Evanescent modes are only considered in predicting the reflection ratio against the vertical barrier and energy losses due to vortex shedding from the lower edge of plate are taken into account. A new relationship to relate the near-bed concentration to the depth-mean concentration is presented by analyzing the vertical structure of concentration. The numerical solutions were also compared with experimental data on morphological changes within a rectangular harbor of constant water depth. Through the numerical experiments, the vortex-induced flow appears to be not ignorable in predicting the morphological changes although the immersion depth of a plate is not deep.