• Development and Reproduction
• /
• v.10 no.3
• /
• pp.197-202
• /
• 2006

Sex steroids are generally considered as natural sex inducers in fish, and aromatase (cytochrome P450 aromatase) that catalyzes androgens into estrogens in the steroidogenic pathway is also known to be involved in sex differentiation. The timing of aromatase action is, thus, of central importance in the study of fish sex differentiation. We treated sexually undifferentiated tilapia (Oreochromis niloticus) larvae with $Fadrozole^{TM}$, a non-steroidal aromatase inhibitor (AI), by immersing the fish in a solution containing AI during the sex differentiation period to narrow down the critical period of aromatase action. Fish were treated once at 11 or 13 days post fertilization (dpf), or twice at 11 and 13 dpf. The concentrations of AI at each time of the treatment were 0 mg/L (control), 50 mg/L or 100 mg/L. Survival rate was not statistically associated with AI immersion treatment (p>0.25). However, sex ratio was significantly altered by the treatment, with higher concentration and double immersion being more effective in masculinizing genetic females (p<0.05). These results suggest that aromatase action for sex differentiation in this fish species would begin at least from 11 dpf which is much earlier than previously expected, and that only 3 hours of brief immersion in AI solution is powerful enough to alter genetically programed sex.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.87-95
• /
• 2020

As an experimental study on the corrosion behavior of steel materials to which ATMS method using EIS was applied in concrete, immersion of Ca(OH)₂ saturated aqueous solution and NaCl aqueous solution simulating the environment inside concrete The corrosion behavior was tested. The equivalent circuit was derived through the analysis of the Nyquist plot, and the interfacial resistance and the polarization resistance of the Ca(OH)₂ aqueous solution were compared, and Al ATMS was the best interfacial resistance and Zn ATMS was the best polarization resistance. After burying ATMS steel material of cement mortar, the initial immersion impedance measurement value was the highest in the Zn ATMS test body in the impedance measurement by the immersion time by immersing it in the NaCl aqueous solution. Al ATMS test piece has the highest impedance and is highly reliable. This is because Al, which has a high ionization tendency, is continuously oxidized in a strong alkaline environment to form a film and protect the steel from permeation of chlorine ions.

• Research in Plant Disease
• /
• v.30 no.2
• /
• pp.194-198
• /
• 2024

Pathogens of fire blight can survive for a long time on pruning tools, etc., and fire blight can be spread through agricultural implements. In particular, in Korea, pruning is frequently performed to remove flowers, immature fruits, and succulent shoots, and this farm work is known to be a major factor of the spread of fire blight. Therefore, in this study, in order to completely sterilize pathogens on pruning shears, we verified the disinfection effect of disinfectants distributed domestically and used them to identify an effective disinfection method. When disinfecting by immersion after inoculating Erwinia amylovora TS3128 on the scissor blade, 70% ethanol and 1% and 0.2% sodium hypochlorite sterilized immediately 10 sec after immersion, while 30% chlorine dioxide showed little disinfection effect. When disinfecting by spraying, 70% ethanol sterilized bacteria 1 sec after spraying, but 1% and 0.2% sodium hypochlorite disinfected bacteria after 10 and 60 sec, respectively. After cutting the naturally disease occurring branches five and 100 times, the bacteria were not hardly sterilized in immersion treatment in 70% ethanol for 30 sec but perfectly disinfected over 60 sec. Considering these results, pruning shears should be disinfected by frequently immersing them in 70% ethanol for at least 60 sec during pruning work in the field.

• Journal of dental hygiene science
• /
• v.16 no.2
• /
• pp.150-156
• /
• 2016

In this study, the surface treatment of a self-cured temporary crown was polished using a denture bur, silicone bur, or pumice. The color stability of the temporary crown resin specimen was evaluated by immersing it in coffee, and cola, wine, beer, red pepper paste, or soybean paste. Two-hundred eighty-five identical resin specimens with six types of staining solution and three types of surface treatment were placed in a shaking incubator at $37^{\circ}C$. The degree of discoloration was observed using a time-lapse recording of days 1, 5, and 7. $L^*$, $a^*$, and $b^*$ were measured using a spectrophotometer, which shows the quantitative value of discoloration, and statistically processed after calculating ${\Delta}E^*$. The results show that as time passed, all the specimens showed a color change (p<0.001). The amount of color change was the greatest in in crowns with denture bur polishing on the day 1, 5, and 7. As the precipitation time increased, the ${\Delta}E^*$ value was also increased. Of the specimens immersed on day 1, the greatest color change in crowns polished with denture bur was observed in those immersed in red pepper paste, while the smallest color change was observed in those immersed in cola. On days 5 and 7, the greatest color change in crowns polished with denture bur was observed in those immersed in red wine. Crowns polished with silicone bur and immersed in soybean paste exhibited the smallest color change. Based on the results, compared to pumice polishing, silicone bur polishing results in better color stability, saves time and money, and is recommended for patients with temporary crowns.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.397-402
• /
• 2010

This study was conducted to find out the appropriate type and concentration of plant growth regulator for mass production of wild type Hydrangea serrata. And the optimal soaking time for rooting of the cuttings was also investigated. When the cuttings of Hydrangea serrata were cultivated for 6 weeks after immersing in $50mg{\cdot}L^{-1}$ of IBA for 3 hrs, the number of roots was 90.6. However the number was significantly decreased when the cuttings were treated with $10mg{\cdot}L^{-1}$ of IBA. The rooting ratio was 100% when the cuttings was immersed in 1,000, 2000 and $3000mg{\cdot}L^{-1}$ of NAA solution for 5, 3 and 10 sec., respectively. Despite the perfect rooting, the number of roots was decreased. The number of roots was 105.5 when the cuttings were treated in $2,000\;mg{\cdot}L^{-1}$ of NAA for 5 sec., which was the highest number in NAA treatment. Overall, the rooting ratio and growth was better when the cutting was treated with low concentration of IBA ($50{\sim}250\;mg{\cdot}L^{-1}$) than the treatment of NAA. And the most appropriate concentration and time fot the treatment of IBA was $50mg{\cdot}L^{-1}$ and 3 hrs, respectively.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.145-152
• /
• 1998

We conducted this study as a fundamental study on the response of various tree species against acid rain. The tree species used for this study were Zelkova serrata, Robinia pseudoacacia, Quercus acutissima, Prunus serrulata, Ginkgo biloba, Pinus koraiensis and Pinus densiflora. The leaves were examined for the pH changes by treatment time and the chlorophyll content into various pH solution in vitro. The results obtained were as follows ; 1. When the leaves were immersed in the solution of various pH(pH 3.0-pH 6.0) levels, the pH were changed to species specific pH ranges as pH 5.0~pH 5.5 of Z. serrata, pH 5.5~pH 6.0 of R. pseudoacacia, pH 4.5~pH 5.0 of Q. acutissima, pH 5.5~pH 6.0 of P. serrulata, pH 3.5~pH 4.5 of G. biloba, pH 3.5~pH 4.5 of P. koraiensis until 48 hours. However, in case of P. densiflora, it was difficult to find specific pH range of the species. Z. serrata, R. pseudoacacia and P. serrulata showed a little pH increasing by pH 2.0 solution treatment, while other species showed no change by the solution. 2. The amount of chlorophyll contents in Z. serrata, R. pseudoacacia and P. serrulata were decreased after immersing in the pH 2.0 solution. Chlorophyll content was almost constant in other pH levels. Other species showed almost constant chlorophyll contents in various pH levels and treatment time.

• Korean journal of applied entomology
• /
• v.25 no.3 s.68
• /
• pp.159-167
• /
• 1986

White tip nematode damage to rice was surveyed at 111 $My{\check{o}}n$ from 36 Gun in Kyongsangnam-Do, $Ky{\check{o}}ngsangbuk-Do\;and\;Ch{\check{o}}llanam-Do$. Rate of damaged stem by the nematode was highest at $Ch'angny{\check{o}}ng-Gun\;in\;Ky{\check{o}}ngsangnam-Do$ as 28.3%, $Y{\check{o}}ngch'on-Gun\;in\;Ky{\check{o}}ngsangbuk-Do$ as 69.3% and $Pos{\check{o}}ng-Gun\;in\;Ch{\check{o}}llanam-Do$ as 40.6%. In pot experiment, no white tip symptoms were appeared in Tongil hybrids except $W{\check{o}}np'ung$ by 3.4% but a great number of the nematode was detected in seeds while symptom and a fair amount of the nematode were observed in Japonica cultivars. The number of nematode in Shingwang cultivar of Tongil hybrids and Dongin cultivar of Japonica was highest by 1997, by 1023 individuals per 10g of seed respectively. Detection rate of the nematode was different depended upon peeling of the husks. Less than 50% was detected from unhulling seed compared with hulled seed except 8 cultivars such as $Shins{\check{o}}nchal$, Hangangchal, $S{\check{o}}gwang,\;Y{\check{o}}ngpung$, Milyang 23, $Such{\check{o}}ng,\;Taech'{\check{o}}ng\;and\;S{\check{o}}nam$. More effective detection was oftained with temperature level at $25^{\circ}C$ and increased with immersing time regardless of peeling the husks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.584-609
• /
• 1995

The purpose of this study was to evaluate the difference of the galvanic corrosion behaviour of the titanium in contact with gold alloy, silva-palladium alloy, and nickel-chromium alloy using the immersion and electrochemical method. And the effects of galvallit couples between titanium and the dental alloys were assessed for their usefulness as materials for superstructure. The immersion method was performed by measuring the amount of metal elementsreleased by Inductivey coupled plasma emission spectroscopy(ICPES) The specimen of fifteen titanium plates, the five gold alloy, five silver-palladium, five nickel-chromium plates, and twenty acrylic resin plates ware fabricated, and also the specimen of sixty titanium plugs, the thirty gold alloy, thirty silver-palladium, and nickelc-hromium plugs were made. Thereafter, each plug of gold alloy, silver-palladium, and nickel-chromium inserted into the the titanium and acrylic resin plate, and also titanium plug inserted into the acrylic resin plate. The combination specimens uf galvanic couples immersed in 70m1 artificial saliva solution, and also specimens of four type alloy(that is, titanium, gold, silver-palladium and nickel-chromium alloy) plugs were immersed solely in 70m1 artificial sativa solution. The amount of metal elements released was observed during 21 weeks in the interval of each seven week. The electrochemical method was performed using computer-controlled potentiosta(Autostat 251. Sycopel Sicentific Ltd., U.K). The wax patterns(diameter 11.0mm, thickness,in 1.5mm) of four dental casting alloys were casted by centrifugal method and embedded in self-curing acrylic resin to be about $1.0cm^2$ of exposed surface area. Embedded specimens were polished with silicone carbide paper to #2,000, and ultrasonically cleaned. The working electrode is the specimen of four dental casting alloys, the reference electrode is a saturated calmel electrode(SCE) and the ounter electrode is made of platinum plate. In the artificial saliva solution, the potential scanning was carried out starting from-700mV(SCE) TO +1,000mV(SCE) and the scan rate was 75mV/min. Each polarization curve of alloy was recorded automatically on a logrithmic graphic paper by XY recorder. From the polarization curves of each galvanic couple, corrosion potential and corrosion rates, that is, corrosion density were compared and order of corrosion tendency was determined. From the experiments, the following results were obtained : 1. In the case of immersing titanium, gold alloy, silver-palladium alloy, and nickel-chromium alloysolely in the artificial saliva solution(group 1, 2, 3, and 4), the total amount of metal elements released was that group 4 was greater about 2, 3 times than group 3, and about 7.8 times than group 2. In the case of group 1, the amount of titanium released was not found after 8 week(p<0.001). 2. In the case of galvanic couples of titanium in contact with alloy(group 5, 6), the total amount of metal elements released of group 5 and 6 was less than that of group 7, 8, 9, and 10(p<0.05). 3. In the case of galvanic couples of titanium in contact with silver-palladium alloy(group 7, 8), the total amount of metal elements released of group 7 was greater about twice than that of group 5, and that of group 8 was about 14 times than that of group 6(p<0.05). 4. In the case of galvanic couples of titanium in contact with nickel-chromium alloy(group 9, 10), the total amount of metal elements released of group 9 and 10 was greater about 1.8-3.2 times than that of group 7 and 8, and was greater about 4.3~25 times than that of group 5 and 6(p<0.05). 5. In the effect of galvanic corrosion according to the difference of the area ratio of cathode and anode, the total amount of metal elements released was that group 5 was greater about 4 times than group 6, group 8 was greater about twice than group 7, and group 10 was greater about 1.5 times than group 9(p<0.05). 6. In the effect of galvanic corrosion according to the elasped time during 21 week in the interval of each 7 week, the amount of metal elements released was decreased markedly in the case of galvanic couples of the titanium in contact with gold alloy and silver-palladium alloy but the total amount of nickel and beryllium released was not decreased markedly in the case of galvanic couples of the titanium in contact with nickel-chromium alloy(p<0.05). 7. In the case of galvanic couples of titanium in contact with gold alloy, galvanic current was lower than any other galvanic couple. 8. In the case of galvanic couples of titanium in contact with nickel-chromium alloy, galvanic current was highest among other galvanic couples.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.267-275
• /
• 2018

The purposes of this study were to analyze the mineralogical characteristics of slaked lime used for wall repair of traditional buildings in Bagan, Myanmar and to evaluate the physical properties of lime plaster produced by the same method as Bagan region. In the X-ray diffraction and thermal analysis of the Myanmar slaked lime, portlandite ($Ca(OH)_2$) and brucite ($Mg(OH)_2$) were detected as main constituent minerals, and a carbonate rock mainly composed of dolomite ($CaMg(CO_3)_2$) minerals may be used as a raw material to make slaked lime. The field-emission scanning electron microscope analysis showed that the Myanmar slaked lime was composed of irregularly shaped crystals of $0.5{\mu}m$ or larger and a small amount of $0.1{\mu}m$ of plate - like crystals. The size and uniformity of crystals in Myanmar lime is different from that of Korea slaked lime. This may be attributed to the effect of the mineral composition and the lime hydration method of Myanmar, which produces slurry by immersing the burnt lime in excess water for a long period of time. The compressive strength of the lime plaster in Myanmar resulted in a mean value of $1.13N/mm^2$ for the specimens cured for 28 days. The strength of the specimens with Bale juice was $1.03N/mm^2$, respectively. The lime is an air setting material that exhibits strength through long carbonation process. Therefore, it is necessary to evaluate physical properties according to curing period through long-term curing over 28 days in the future.