• Imaging Science in Dentistry
• /
• v.37 no.4
• /
• pp.197-203
• /
• 2007

Purpose: To provide diagnostic information by evaluation of the positional relationship between the mandibular third molar and the mandibular canal. Materials and Methods: Eighty-nine mandibular third molars were classified as mesioangular, horizontal, vertical, distoangular groups. The distances between the mandibular third molar and the mandibular canal were measured in cone-beam computed tomographs. The height and width ratios of distances from the mandibular third molar and the mandibular canal to the mandibular inferior border and to the lingual cortical plate were calculated. Results: The vertical and buccolingual distances between the mandibular third molar and the mandibular canal were 0.03 mm, 2.96 mm in the mesioangular, 0.37 mm, 3.38 mm in the horizontal, -1.50 mm, 1.38 mm in the vertical, -1.10 mm, 4.20 mm in the distoangular group. There were significant differences in vertical (P < 0.05), but not in buccolingual (P>0.05). The height and width ratios of distances on the mandibular third molar were 47.1 %, 36.1 % in the mesioangular, 47.4%, 34.4% in the horizontal, 37.0%, 46.7% in the vertical, 40.9%, 37.4% in the distoangular group. There were significant differences between the mesioangular and the vertical group, and the horizontal and the vertical group in height ratio (P < 0.05), and also between the mesioangular and the vertical group in width ratio (P < 0.05). The height and width ratios of distances on the mandibular canal showed no significant differences between groups (P > 0.05). Conclusion : The mesioangular group showed the nearest distance between the mandibular third molar and the mandibular canal vertically. The root apex of the mandibular third molar was positioned more buccally in the vertical group than in the mesioangular group.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.322-327
• /
• 2012

Parallel-plate-type scanning sensors have been commercially used for X-ray imaging sensors. In this study, we manufactured the scan typed 1D X-ray image sensor that can be used to obtain scanning images, by using the plasma display panel (PDP) fabrication process. We fabricated drift and pixel electrodes in the glass chamber and injected Xe gas at atmospheric pressure. We evaluated the intensity of a pixel signal depending on the bias voltage on the drift electrode and investigated the characteristics of shielding effect on the single pixel using lead (Pb). The adsorption rate of X-ray photon is low (4%) on the soda lime glass (1.1mm) and the electrical signal detected on the X-ray sensor was increased in the high bias voltage. We acquired digital X-ray scanning image with our DAS (data acquisition system) and sensor scanning system.

• Applied Microscopy
• /
• v.26 no.2
• /
• pp.105-121
• /
• 1996

투과전자현미경을 이용한 최근의 재료 분석기술에 대해 일본 토호쿠대학의 ASMA (Atomic Scale Morphology Analysis) 연구실에서 얻은 실험결과를 중심으로 설명하였다. 현재 토호쿠대학에서 가동 중에 있는 가속전압 1250 kV의 초고압 투과전자현미경은 분해능이 약 0.1nm이며, 이 전자현미경으로부터 얻은 고분해능상은 대형컴퓨터를 이용한 시뮤레이션에 의해 해석 할 수 있음을 나타내었다. 또한, 이러한 뛰어난 고분해능 특성을 가진 초고압 투과전자현미경과 최근 재료 분야의 전자현미경 시료 제작기술의 하나로서 크게 주목받고 있는 초박절편법 (Ultramicrotomy)을 이용한 헤마타이트 미립자의 내부구조 해석 결과를 나타내었다. 새로운 전자현미경 분석기법을 위한 주변장비의 눈에 띄는 발달중의 하나로서 전자현미경상을 디지탈 형태로 기록하고, 이를 효과적인 화상처리 기법으로 해석할 수 있는 Imaging Plate (IP)를 주목할 수 있다. 본 논문에서는 IP의 응용 예로서 IP를 이용하여 기록한 고분해능 전자현미경상과 전자 회절패턴의 정량해석 결과에 대해 나타내었다. 에너지분산 X-선 검출기를 이용한 새로운 분석기법의 예로서 전자 채널링 효과를 이용한 ALCHEMI법을 Ni-Al-Mn계 화합물에 대한 실험결과와 함께 나타내었다. 또한, 전자에너지 손실 분광 분석법을 이용한 최근 분석 결과로서 여러 구리 화합물의 전자구조 차이에 따른 구리의 $L_{23}$ 가장자리 피이크 변화를 나타내었다. 새로운 전자현미경법인 에너지 필터를 사용하여 $Al_{0.5}In_{0.5}As$의 전자회절 패턴의 백그라운드를 제거한 결과를 에너지 필터를 사용하지 않은 $Al_{0.5}In_{0.5}As$의 전자회절 패턴과 비교하여 나타내었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.354-360
• /
• 2002

The piezoelectric composites had many advantages in comparison with conventional piezoelectric ceramics and piezopolymers for ultrasonic transducers used in NDT and in medical ultrasionic imaging. The electromechanical coupling coefficient should be high and the acoustic impedance should be low in these applications. However, the cross-coupling with spurious oscillations caused by laterally running plate waves exhibited complex motions in the surface of piezoelectric composites with coarse lateral spatial scale. The thickness mode electromechanical coupling coefficient of 1-3type of piezoelectric compoistes were 0.36 to 0.64, and the acoustic impedance of them were 9.8 to 22.7 MRayl. The lateral resonance frequency of 1-3 type piezoelectric composites shifted to high frequency region with decreasing lateral spatial scale.

• Journal of Veterinary Clinics
• /
• v.33 no.3
• /
• pp.168-171
• /
• 2016

Signalment: An 8-month-old female Alaskan malamute was presented for progressive cluster seizure disorder. Results: There were no abnormalities on neurological examination, survey radiographs, or blood analysis. Magnetic resonance (MR) imaging and computed tomography revealed extension of the olfactory bulb and frontal lobe into the nasal cavity. They also confirmed abnormal anatomy of the nasal turbinates within the rostral part of the nasal cavity and the absence of a cribriform plate. On T2-weighted and fluid-attenuated inversion recovery images, the herniated brain showed heterogeneous and hyperintense signals consistent with intraparenchymal edema. Transverse MR images showed brain herniation into the right frontal cavity and an asymmetrical lateral ventricle because of a left midline shift. On contrast-enhanced MR images, the protruding brain parenchyma was mildly enhanced. Ethmoidal encephalocele was suspected as the final diagnosis. Despite symptomatic treatment, the dog continued to exhibit seizures and was euthanized. Clinical relevance: Ethmoidal encephalocele is a rare disease in dogs. However, it could be considered as a cause of seizure in young dogs.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.52-52
• /
• 2003

1996년 미국 버클리 대학의 Space Science Laboratory와 공동으로 고온 성간 물질의 관측에 대한 Conceptual Study로부터 시작되어 1998년 과학위성 1호의 주 탑재체로 선정되면서 본격적인 개발에 들어간 원자외선 분광기(FIMS: Far-ultraviolet IMaging Spectrograph)는 Engineering Model 개발, Qualification Model 개발, Flight Model의 개발 및 보정, 그리고 최종적으로 과학기술위성 1호 본체와의 조립 시험 및 환경시험을 거쳐 2003년 9월 26일 러시아의 플레세츠크에서 COSMOS-3M 발사체에 의해 발사된다. FIMS를 포함한 과학위성 1호는 현재 발사를 위해 러시아 현지에 이송되어 최종 시험을 진행 중이며, 발사 후 약 20일 가량은 위성의 운용 시험을 하게 되며, 이후 FIMS의 운용에 영향을 줄 수 있는 Out-gassing이 충분히 이루어진 후 FIMS의 Test 및 초기 운용이 이루어 진다. FIMS의 Detector로 사용되는 MCP(Micro Channel Plate)의 정상적 동작이 확인되면, 1년여에 걸쳐 FIMS의 주 임무인 원자외선 영역(900∼1750')의 은하계 전천 탐사를 수행하게 된다. 전천 탐사가 마무리 되면, 전천탐사의 결과를 바탕으로 개별 천체의 영상 및 분광 자료를 획득하게 되며, 동시에 원자외선 영역의 오로라 및 지구 대기광 측정을 수행한다.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.5
• /
• pp.351-356
• /
• 2006

Objective : Spondylodiscitis has been diagnosed by clinical, radiological and laboratory methods. MR imaging is well known as an excellent diagnostic tool for spondylodiscitis. However, the changes in MR images throughout the treatment process has not been studied. Thus we have analyzed the serial changes of MR images throughout the stages of infection. Methods : Ten patients were selected for retrospective reviewed who had been treated at our institute for infectious spondylodiscitis between 2000 and 2005. These patients had been followed-up at least six months and had taken more than a couple of series of MR scans. We classified the MR images into four groups according to the stages of treatment for the infection and compared them to the clinical and laboratory findings. Results : MR image signals changed minimally or appeared to be normal in the early stages. The progression of spondylodiscitis was characterized by a low T1 WI signal and a high T2 WI signal in disc and vertebral body. The signal changes of the MR images were then propagated and the end plate was destructed. During the treatment, the destructed endplate became stabilized and the signal intensity of both T1 and T2 WI were fixed to low-or iso-intensity. Conclusion : We can determine the serial signal changes based on MR images according to the treatment of spondylodiscitis. We can therefore determine the status of the infection and the stage of treatment, as well as the diagnosis of spondylodiscitis using serial MR images.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2017

We performed seismic imaging based on relative S-wave travel times to examine S-wave velocity of upper mantle structure beneath East Asia. We used teleseismic events recorded at 129 broadband stations of the Korea Institute of Geoscience and Mineral Resources (KIGAM), Korea Meteorological Administration (KMA), and National Research Institute for Earth Science and Disaster Prevention (NIED). Relative travel time residuals were obtained by a multi-channel cross-correlation method designed to automatically determine accurate relative phase arrival times. The resulting images show high-velocity anomalies along plate boundaries around the Japanese islands region. These anomalies may indicate subducting Pacific and Philippine Sea plates. On the other hand, a low-velocity anomaly is revealed beneath east of the Korean peninsula down to around 300 km depth, which is thought to be related to the formation of the Ulleung basin and the Ulleung island. Low-velocity anomalies revealed beneath the Jeju island may imply that the formation and volcanism of the Jeju island have been caused by magmatic sources from the deep mantle.

• Imaging Science in Dentistry
• /
• v.46 no.3
• /
• pp.179-184
• /
• 2016

Purpose: In the present study, we coined the term 'alveolar dome' and aimed to demonstrate the prevalence of alveolar domes through digital periapical radiographs. Materials and Methods: This study examined 800 digital periapical radiographs in regard to the presence of alveolar domes. The periapical radiographs were acquired by a digital system using a photostimulable phosphor (PSP) plate. The ${\chi}^2$ test, with a significance level of 5%, was used to compare the prevalence of alveolar domes in the maxillary posterior teeth and, considering the same teeth, to verify the difference in the prevalence of dome-shaped phenomena between the roots. Results: The prevalence of alveolar domes present in the first pre-molars was statistically lower as compared to the other maxillary posterior teeth (p<0.05). No statistically significant difference was observed in the prevalence of alveolar domes between the maxillary first and second molars. Considering the maxillary first and second molars, it was observed that the palatal root presented a lower prevalence of alveolar domes when compared to the distobuccal and mesiobuccal roots (p<0.05). Conclusion: The present study coined the term 'alveolar dome', referring to the anatomical projection of the root into the floor of the maxillary sinus. The maxillary first and second molars presented a greater prevalence of alveolar domes, especially in the buccal roots, followed by the third molars and second pre-molars. Although the periapical radiograph is a two-dimensional method, it can provide dentists with the auxiliary information necessary to identify alveolar domes, thus improving diagnosis, planning, and treatment.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.237-240
• /
• 2002

Knowing the dose distribution in a tissue is as important as being able to measure exposure or absorbed dose in radiotherapy. Since the Dry Imager spread, the wet type automatic processor is no longer used. Furthermore, the waste fluid after film development process brings about a serious problem for prevention of pollution. Therefore, we have developed a measurement method for the dose distribution (CR dosimetry) in the phantom based on the imaging plate (IP) of the computed radiography (CR). The IP was applied for the dose measurement as a dosimeter instead of the film used for film dosimetry. The data from the irradiated IP were processed by a personal computer with 10 bits and were depicted as absorbed dose distributions in the phantom. The image of the dose distribution was obtained from the CR system using the DICOM form. The CR dosimetry is an application of CR system currently employed in medical examinations to dosimetry in radiotherapy. A dose distribution can be easily shown by the Dose Distribution Depiction System we developed this time. Moreover, the measurement method is simpler and a result is obtained more quickly compared with film dosimetry.