• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.976-979
• /
• 2003

In this study, we formed the 2-dimensional holographic grating in order to mamufactured 2-dimensional photonic crystal in amorphous $As_{40}Ge_{10}Se_{15}S_{35}$ and $Ag/As_{40}Ge_{10}Se_{15}S_{35}$ thin film which have the excellent optical sensetivity using by He-Ne laser(632.8nm). The intensity of incident beam was 2.5mW and incident angle that $2{\theta}$ is $20^{\circ}$. We formed the holographic grating after had formed the 1-dimansional holographic grating and then rotate the sample. We confirmed that 2-dimensional holographic grating result of the figure of diffracted beam and AFM(Atomic Forced Microcopy) image.

• 신재생에너지
• /
• 제9권2호
• /
• pp.30-39
• /
• 2013

Multi-crystalline silicon solar cells is not exist a specific crystal direction different from single crystalline silicon solar cells. In functional materials, therefore, isotropic wet etching of mc-Si solar cell is easy the acid solution rather than the alkaline solution. The reflectance of wet texturing process is about 25% and the reflectance of RIE texturing process is achieved less than 10%. In addition, wet texturing has many disadvantages as well as reflectance. So wet texturing process has been replaced by a RIE texturing process. In order to apply BIPV, RIE and wet textured multi-crystalline silicon solar cell modules was manufactured by different kind of EVA sheet. Moreover, in case of BIPV, the short circuit current characteristics according to the angle of incidence is more important, because the installation of BIPV is fixed location. In this study, we has measured SEM image and I-V curve of RIE and wet textured silicon solar cell and PV module. Also we has analyzed quantum efficiency characteristics of RIE and wet textured silicon solar cell for PV modules depending on incidence angle.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.419-424
• /
• 2009

Congruent or stoichiometric $LiNbO_3$ fiber single crystals were grown by the $\mu$-PD method, and the grown fiber crystals have the several (2 or 3) ridges with a diameter of $1.35{\sim}1.5\;mm$ and a length of $40{\sim}100\;mm$. In this $\mu$-PD process, different growth rates ($10{\sim}60\;mm/h$) were applied. Pt wire or $LiNbO_3$ crystal was used as a seed. The properties of grown $LiNbO_3$ fiber single crystals having a-axis or c-axis according to seeds were effected by the grown conditions(Pt tube diameter, pulling speed, after heater etc.). Disk-type $LiNbO_3$ samples were poled in condition of DC 5 V/cm at 1050, 1075 or $1100^{\circ}C$. XRD, SEM, conoscope image through the polarized microscope, $T_C$ measuring apparatus, optical transmittance measuring instrument are used to identify the properties of $LiNbO_3$.

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.11-21
• /
• 2015

This study analyzed the expressive phenomenon of a blurred boundary in fashion jewelry focused on the relationship between fashion jewelry and costume or fashion jewelry and body. The method of this study was to analyze recent documentaries about jewelry theories in regards to 607 cases of fashion jewelry design in fashion books, fashion magazines, fashion internet sites from 2000 to 2014. The results were: First, phenomenon of blurred boundary between fashion jewelry and costume was expressed in a see-through wear form made of luxury material (gold and diamond) or paste material, a similar form (like fashion accessories made of crystal, bids, and gold chain), an integration of fashion accessories and jewelry, and an attached jewelry on fashion accessories. It reflected a rearrangement of conventional relationships, a blurred relation of function and meaning, dissolution of jewelry form stereotypes, jewelry styling, a harmony of function and decoration, and an alteration to the central role of a fashion image. Second, the phenomenon of a blurred boundary between fashion jewelry and body was expressed in a body organ wrapping, body surface adhesion and sculptural jewelry based on body pose. It reflected a separation from conventional space of jewelry expression, a realization of mystery and fantastic, an expression of new body surface and a blurred boundaries of fashion jewelry and body art. Aesthetic characteristics were analyzed into metaphor and integration by separation from the conventional relationship of fashion jewelry and costume or fashion jewelry and body.

• 센서학회지
• /
• 제7권2호
• /
• pp.103-110
• /
• 1998

강유전체 박막과 마이크로 가공기술을 이용하여 초전형 적외선 센서를 제작하였다. 초전형 적외선 센서는 $Pb_{l-x}La_{x}Ti_{1-x/4}O_{3}$ (x=0.05) (PLT) 강유전체 박막 커패시터를 RF 마그네트론 스퍼터링 방식으로 백감 전극이 증착된 MgO 기판상에 결정 성장시킨 구조를 갖고 있다. 스퍼터링된 PLT 박막은 높은 c-축 결정 구조를 가지므로 센서로 사용하기 위한 분극 처리 과정이 필요 없다. 이는 적외선 이미지 센서를 구현함에 있어서 수율 향상에 필수적인 요소이다. 또한 마이크로 가공 기술을 사용하여 센서의 열용량을 극소화함으로서 센서의 효율을 최대화하였다. 제작된 센서의 상부에 폴리이미드를 코팅하고 MgO 기판을 선택적으로 식각하여 코팅된 폴리이미드와 MgO가 강유전체 박막 커패시터를 지지하고 있는 구조를 구현하였다. 이렇게 제작된 센서의 감도는 상온에서 $8.5{\times}10^{8}cm{\cdot}\sqrt{Hz}/W$로 측정되었으며 이는 마이크로 가공 기술을 사용하지 않은 경우보다 약 100 배의 감도 향상을 가져왔다. 2차원 배열 구조를 갖는 센서를 가지고 인체의 유 무 뿐만 아니라 위치까지 감별할 수 있는 센싱 시스템을 구현하였다.

• 한국주조공학회지
• /
• 제23권5호
• /
• pp.276-285
• /
• 2003

In the undercooled melt of $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy, the solidification behavior including nucleation and growth of crystals at the micrometer level has been observed in-situ by use of a confocal scanning laser microscope combined with an infrared image furnace. The $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy specimens were cooled from the liquid state to glass transition temperature. 575 K, at various cooling late under a helium gas flow. According to the cooling rate, the morphologies of the solidification front are changed among various types, irregular jog like front, columnar dendritic front, cellular grain, star like shape jog and fine grain, etc. The velocities of the solid-liquid interface are measured to be $10^{-5}{\sim}10^{-8}$ m/s which are at least two orders higher than the theoretical crystal growth rates. Combining the morphologies observed in terms of cooling rates and their solidification behaviors, we conclude that phase separation takes place in the undercooled molten $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy. The continuous cooling transformation (CCT) diagram was constructed from solidification onset time at various linear cooling conditions with different rate. The CCT diagram suggests that the critical cooling rate for glassy solidification is about 1.5 K/s, which is in agreement with the previous calorimetric findings.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.423-429
• /
• 2008

This work was carried out to improve the performance of anodic electrocatalysts in direct ethanol fuel cell(DEFC). PtRu and $Pt_5Ru_4M$(M= Ni, Sn, Mo and W) electrocatalysts were prepared by using a $NaBH_4$ reduction method. Alloy crystal structure and particle size of electrocatalysts were characterized by X-ray diffraction(XRD) and transmission electron microscopy(TEM). The XRD analysis of the electrocatalysts revealed that the face-centered cubic(fcc) peaks shifted to slightly higher diffraction angles when third metals were added. Average size of the uniform particles was observed to be approximately $3{\sim}3.5\;nm$ from the TEM image. The electrochemical measurements were carried out in the solution 1M $H_2SO_4$ and 1M $C_2H_5OH$ at room temperature. Cyclic-voltammogram results showed that $Pt_5Ru_4W$ electrocatalyst exhibited much higher current density for ethanol oxidation of $2.73\;mA/cm^2$ than PtRu electrocatalyst of $0.73\;mA/cm^2$.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.568-573
• /
• 2016

We explore the crystalline structure and phase transition of lithium thiophosphate ($Li_7P_3S_{11}$) solid electrolyte using electron microscopy and X-ray diffraction. The glass-like $Li_7P_3S_{11}$ powder is prepared by the high-energy mechanical milling process. According to the energy dispersive X-ray spectroscopy (EDS) and selected area diffraction (SAD) analysis, the glass powder shows chemical homogeneity without noticeable contrast variation at any specific spot in the specimen and amorphous SAD ring patterns. Upon heating up to $260^{\circ}C$ the glass $Li_7P_3S_{11}$ powder becomes crystallized, clearly representing crystal plane diffraction contrast in the high-resolution transmission electron microscopy image. We further confirm that each diffraction spot precisely corresponds to the diffraction from a particular $Li_7P_3S_{11}$ crystallographic structure, which is also in good agreement with the previous X-ray diffraction results. We expect that the microscopic analysis with EDS and SAD patterns would permit a new approach to study in the atomic scale of other lithium ion conducting sulfides.

• 한국콘텐츠학회논문지
• /
• 제17권9호
• /
• pp.60-68
• /
• 2017

필자는 이 논문을 통해 현대영화의 자유간접화법의 형식들을 파악하고자 한다. 우선 자유간접화법과 관련한 개념 정립을 위해 바흐친의 화자와 인물의 목소리의 혼합이라는 다음성 이론을 살펴보았다. 그러나 다음성 이론을 영화에 적용하기 위해서는 소설과 영화의 형식적 차이를 간과할 수 없으며, 이에 필자는 필자의 선행 연구인 서사 거리(narrative distance) 개념에 기초하여 영화 저작도구인 카메라의 이중적 위치에서 영화의 자유간접화법의 가능성을 찾으려 한다. 이어서 필자는 들뢰즈가 "시네마II"에서 주창한 시간 개념을 도입하여 영화의 자유간접화법의 의미를 분석하였다. 즉, 들뢰즈에게서 시간은 과거와 현재의 순환이며 비유크리트적 공간처럼 시간도 순환한다고 본다. 이런 들뢰즈의 크리스털 이미지로서의 시간 개념을 영화 <여자, 정혜>의 분석 도구로 원용하여 영화 속 자유간접화법의 형식들을 이해하고자 한다.