• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.174-182
• /
• 2010

In this study, we evaluated feasibility of applying MTV (Metabolic Target Volume) to respiratory gated radiotherapy for more accurate treatment using various SUV (Standard Uptake Value) from PET images. We compared VOI (Volume of Interest) images from 50%, 30% and 5% SUV (standard uptake volume) from PET scan of an artificial target with GTV (Gross Tumor Volume) images defined by percentage of respiratory phase from 4D-CT scan for respiratory gated radiotherapy. It is found that the difference of VOI of 30% SUV is reduced noticeably comparing with that of 50% SUV in longitudinal direction with respect to total GTV of 4D-CT image. Difference of VOI of 30% SUV from 4D-PET image defined by respiratory phase from 25% inhalation to 25% exhalation, and GTV from 4D-CT with the same phase is shown below 0.6 cm in maximum. Thus, it is better to use 4D-PET images than conventional PET images for applying MTV to gated RT. From the result that VOI of 5% SUV from 4D-PET agrees well with reference image of 4D-CT in all direction, and the recommendation from department of nuclear medicine that 30% SUV be advised for defining tumor range, it is found that using less than 30%SUV will be more accurate and practical to apply MTV for respiratory gated radiotherapy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.1
• /
• pp.319-323
• /
• 2012

Objective: To explore the feasibility of shrinking field technique after 40 Gy radiation through 18F-FDG PET/CT during treatment for patients with stage III non-small cell lung cancer (NSCLC). Methods: In 66 consecutive patients with local-advanced NSCLC, 18F-FDG PET/CT scanning was performed prior to treatment and repeated after 40 Gy. Conventionally fractionated IMRT or CRT plans to a median total dose of 66Gy (range, 60-78Gy) were generated. The target volumes were delineated in composite images of CT and PET. Plan 1 was designed for 40 Gy to the initial planning target volume (PTV) with a subsequent 20-28 Gy-boost to the shrunken PTV. Plan 2 was delivering the same dose to the initial PTV without shrinking field. Accumulated doses of normal tissues were calculated using deformable image registration during the treatment course. Results: The median GTV and PTV reduction were 35% and 30% after 40 Gy treatment. Target volume reduction was correlated with chemotherapy and sex. In plan 2, delivering the same dose to the initial PTV could have only been achieved in 10 (15.2%) patients. Significant differences (p<0.05) were observed regarding doses to the lung, spinal cord, esophagus and heart. Conclusions: Radiotherapy adaptive to tumor shrinkage determined by repeated 18F-FDG PET/CT after 40 Gy during treatment course might be feasible to spare more normal tissues, and has the potential to allow dose escalation and increased local control.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.1
• /
• pp.114-122
• /
• 1999

The development of EDI is playing a very great role in strengthening corporate competitiveness in the foreign market in addition to the expansion of the size of trade volumes between nations and the solution of the problem or streamlining procedures for trade as well as the smooth processing of trade business and cost and time savings effects. At point in time that corporate credibility and national image in Korea have greatly fallen in the IMF-supported regime, Korea is making every effort to restore its national credibility through the expansion of exports and focusing on the increase of exports through EDI for trade as part of this. Therefore. this study was intended to probe the EDI promotion strategy of the exporting firm with the development of EDI As a result, the following conslusion was drawn : (1) Development of the EDI system to provide immediate options. (2) Making the staff information - minded at a company-wide level. (3) Development of the website as the tool of the marketing strategy. (4) Construction of the Cyber Shopping Mall.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.24-36
• /
• 2000

This study deals with the optimal method of orthophoto products using the non-photogrammetric scanners. we scanned positive film of aerial photographs at the different resolution and producted the orthophoto using the automatically generated DEM based on the Digital Photogrammetric Workstation, considering aerial image resolutions, DEM interval, resampling method and outpixel size. As a results, the acquired accuracy was worse in horizontal, but good in vertical. So It will be expected that orthophoto using non-photo grammetric scanner is good enough for the acquisition of GIS data and the calculation of soil volumes.

• Imaging Science in Dentistry
• /
• v.45 no.2
• /
• pp.73-80
• /
• 2015

Purpose: This study evaluated the effect of various head orientations during cone-beam computed tomography (CBCT) image acquisition on linear measurements of potential implant sites. Materials and Methods: Six dry human skulls with a total of 28 implant sites were evaluated for seven different head orientations. The scans were acquired using a Hitachi CB-MercuRay CBCT machine. The scanned volumes were reconstructed. Horizontal and vertical measurements were made and were compared to measurements made after simulating the head position to corrected head angulations. Data was analyzed using a two-way ANOVA test. Results: Statistical analysis revealed a significant interaction between the mean errors in vertical measurements with a marked difference observed at the extension head position (P<0.05). Statistical analysis failed to yield any significant interaction between the mean errors in horizontal measurements at various head positions. Conclusion: Head orientation could significantly affect the vertical measurements in CBCT scans. The main head position influencing the measurements is extension.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.373-379
• /
• 2016

It is known that it is expedient to represent the distribution of the properties of a bone with complex heterogeneity as B-spline volume functions. For B-spline-based representation, the pixel values of CT images are interpolated by B-spline volume functions. However, the CT images of a bone are three-dimensional and very large, and hence a large amount of memory and long computation time for the interpolation are required. In this study, a method for resolving these problems is proposed. In the proposed method, the B-spline volume interpolation problem is simplified by using the uniformity of pixel spacing of the image and the properties of B-spline basis functions. This results in a reduction in computation time and the amount of memory used. The proposed method was implemented and it was verified that the computation time and the amount of memory used were reduced.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.6
• /
• pp.114-126
• /
• 2001

The purpose of this study is to establish the databases of pollutant sources and water quality measurement data by utilizing GIS, and making the user interface for the management of pollutant sources. Yeongsan Estuarine Lake was formed of a huge levee of 4.35 km constructed by an agricultural reclamation project. Water quality of the reservoir has been degraded gradually, which mainly attributes to increase of point and non-point source pollutant loads from the lake's watershed of 33,374.3 $\textrm{km}^2$ into it. Application of GIS to establishment of the database was researched of pint source such as domestic sewage, industrial wastewater, farm wastes, and fishery wastes, and non-pont source such as residence, rice and upland field, and forest runoffs of the watershed of the lake. NT Acr/Info and ArcView were mainly utilized for the database formation. Land use of the watershed using LANDSAT image data was analyzed for non-point source pollutant load estimation. Pollutant loads from the watershed into the reservoir were calculated using the GIS database and BOD, TN, TP load units of point and non-point sources. Total BOD, TN, TP loads into it reached approximately to 141, 715, 2,094 and 4,743 kg/day respectively. The loads can be used as input parameters for water quality predicting model of it. A user-friendly interface program was developed using Dialog Designer and Avenue Script of AcrView, which can perform spatial analysis of point and non-point sources, calculate pollutant inputs from the sources, update attribute data of them, delete and add point sources, identify locations and volumes of water treatment facilities, and examine water quality data of water sampling points.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1454-1464
• /
• 2013

In this paper, we propose a rapid rigid registration method for the fusion visualization of intra-operative 2D XA and pre-operative 3D CTA images. In this paper, we propose a global movement estimation based on a trilateration for the fast and robust initial registration. In addition, the principal axis of each image is generated and aligned, and the bounding box of the vascular shape is compared for more accurate initial registration. For the fine registration, two images are registered where the distance between two vascular structures is minimized by selective distance measure. In the experiment, we evaluate a speed, accuracy and robustness using five patients' data by comparing the previous registration method. Our proposed method shows that two volumes can be registered at optimal location rapidly, and robustly comparing with the previous method.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.161-162
• /
• 1997

It is very useful to perform the surgery simulation before implanting TAH(Total Artificial Heart} in a patient. The space of chest and the shape of vessels are different from patient to patient. So, It is desirable to customize a TAH design to the anatomy structure of a patient. Several studies are performed to visualize and explain the 3D structure of heart. These studies are performed using 2-dimensional ref or mated images and simple measurement. Anatomy structure of a human heart is not so simple. It is 4dimensional structure ; 3-dimensional plus time, heart beating. 3-dimensional reconstruction schemes of medical images developed for about 10 years are usually categorized into two types of rendering technique ; surface rendering and volume rendering. Volume rendering is preferable in medical image processing field because this technique can be applied without considering the complexity of geometry and change of field of interest. The usable space in the chest of patient can be measured by 3D volume matching of patient trunk and TAH model. This space changes with time. In this research we have developed the 4-dimensional volume match program of patient and TAH model. 3-dimensional rendered set of volumes along time were used to simulate TAH fitting trial. The quantitative measurement from this simulation could be applied to customize TAH design.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.51-72
• /
• 1998

Futurists objected the existent style, that is the conventional fashion, and took part in these disciplines of fashion to make clothes the instruments being able to represent the individuality. Giacomo Balla and fortunato Depero, pain-ters who in 1915 were to work with Diaghilev's company, were the first to see clothing as a dynamic interfaced between th body and the atmosphere, between physical gestures and the urban context, which could be translated into encounters between forms and colours, volumes and architecture. For them, clothing began to exist as an object and an event, something to be removed from a mainly static conception and made mobile, active. The interaction between movement and clothing was based on the relativity of perception : the appearance and disappearance of the body produced points without dimension or duration which served, as Balla wrote in the Futurist Mnaifesto of Men's Clothing to“renew incessantly the enjoyment and impetuous movement of the body”. The historical achievement in the effort for the reformation of Futurist, Art to Wear. First, for Futurist, clothing is removed from a static conception and focused on dynamics. Second, Balla used asymmetry in men's clothing. Moreover he supposed dynamic men's clothes by using optical intersection. Third, the after image of Chronophotograph represented rapidity. This rhythmic expression is the fore-runner in Optical and Kinetic Art of Visual Art. Fourth, Futurist emphasized flexibility in fashion. They aimed to create‘Clothing Machines’whose parts would interact to aceelerate the real and virtual, inner and outer movement of the human being. Fifth, the variety and short life of cutting skills and colors are focused and‘Fast Substance’in fashion is admitted by Futurists. Futurist concern with clothing was not lim-ited its appearance in terms of cut and colour. What important was also the way it appeared and disappeared according to fashion. It was a“fast substance”, able to reflect rapid, sudden changes of social and aesthetic taste. To reach to the aim of internationalization, Gesamtkunstwerk in our Art to Wear, it is extremely meaningful to examine art fashion which is created under the conception of Gesamtkunstwerk production of avang garde artist in the early 20th century and look at formative conscious of truth, goodess and beauty synthetically which they faced on their works of art.