• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.281-284
• /
• 2003

In this study, we have proposed the method of moving area detection as the preprocessing step of moving object tracking system. First, we catch the two frames which are different at time in image sequence. We obtain the moving area by using their binary differential image. In differential image, the object area of previous and current frame is present. In the tracking system, the background is changed by camera motion. So, in this case we have to decide which moving area of object is current at time. We obtain the binary edge image of current frame by applying a threshold to the output of an edge detector. Then we performed logical AND operation between the edge image and differential image. As a result of this work moving area of object can be detected.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.3
• /
• pp.258-266
• /
• 2014

We present a system for the real-time visual relative navigation of a fixed-wing unmanned aerial vehicle in a GPS-denied environment. An extended Kalman filter is used to construct a vision-aided navigation system by fusing the image processing results with barometer and inertial sensor measurements. Using a mean-shift object tracking algorithm, an onboard vision system provides pixel measurements to the navigation filter. The filter is slightly modified to deal with delayed measurements from the vision system. The image processing algorithm and the navigation filter are verified by flight tests. The results show that the proposed aerial system is able to maintain circling around a target without using GPS data.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.21-28
• /
• 2011

In recent years, owing to the development of the image processing technology, the research to build control system using a vision sensor is stimulated. However, a random time delay must be considered, because it works of a various time to get a result of an image processing in the system. It can be seen as an obstacle factor to a control of visual tracking in real system. In this paper, implementing two vision controllers each, first one is made up PID controller and the second one is consisted of a Smith Predictor, the possibility was shown to overcome a problem of a random time delay in a visual tracking system. A number of simulations and experiments were done to show the validity of this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.829-842
• /
• 2018

Unmanned Aerial Vehicle (UAV) is diversely utilized in our lives such as daily hobbies, specialized video image taking and disaster prevention activities. New ways of UAV application have been explored recently such as UAV-based delivery. However, most UAV systems are being utilized in a passive form such as real-time video image monitoring, filmed image ground analysis and storage. For more proactive UAV utilization, there should be higher-performance UAV and large-capacity memory than those presently utilized. Against this backdrop, this study described the general matters on proactive software platform and high-performance UAV hardware for real-time target tracking; implemented research on its design and implementation, and described its implementation method. Moreover, in its established platform, this study measured and analyzed the core-specific CPU consumption.

• Journal of Welding and Joining
• /
• v.16 no.6
• /
• pp.68-76
• /
• 1998

A CCD camera with a laser stripe was applied to realized the automatic weld seam tracking. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path. The adaptive Hough transformation was used to extract laser stripes an to obtain specific weld points. It takes relatively long time to process image on-line control using the basic control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The dead zone, where the sensing of weld line is impossible, was eliminated by rotating the camera with its rotating axis centered at the weld torch. When weld lines were detected, the camera angle was controlled in order to get the minimum image data for sensing of weld lines. Consequently, the image processing time was reduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1105-1109
• /
• 1995

A CCD-camera, which is structured with vision system, was used to realize automatic seam-tracking system and 3-D information which is needed to generate torch path, was obtained by using laser-slip beam. To extract laser strip and obtain welding-specific point, Adaptive Hough-transformation was used. Although the basic Hough transformation takes too much time to process image on line, it has a tendency to be robust to the noises as like spatter. For that reson, it was complemented with Adaptive Hough transformation to have an on-line processing ability for scanning a welding-specific point. the dead zone,where the sensing of weld line is impossible, is eliminated by rotating the camera with its rotating axis centered at welding torch. The camera angle is controlled so as to get the minimum image data for the sensing of weld line, hence the image processing time is reduced. The fuzzy controller is adapted to control the camera angle.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2015

Tracking of an object in 3D space performed in real-time is a significant task in different domains from autonomous robots to smart vehicles. In traditional methods, specific data acquisition equipments such as radars, lasers etc, are used. Contemporary computer technology development accelerates image processing, and it results in three-dimensional stereo vision to be used for localizing and object tracking in space. This paper describes a system for tracking three dimensional motion of an object using color information in real time. We create stereo images using pair of a simple web camera, raw data of an object positions are collected under realistic noisy conditions. The system has been tested using OpenCV and Matlab and the results of the experiments are presented here.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.206-213
• /
• 2015

An omni-directional, graded-index and textured ZnO nanorods with $MgF_2$ anti-reflective(AR) coating films for the electro optical tracking system(EOTS) by e-beam evaporation method are presented. we achieved that the graded index structure can minimize image tracking interference of EOTS which is comparable to a general AR coating films. Optimized ZnO nanorods with $MgF_2$ AR coating films lead to decreasing Fresnel reflection by gradient refractive index. According to our experiment results, ZnO nanorods with $MgF_2$ AR coating films can be used for various electro optical system to improve the optical performance.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.156-166
• /
• 1999

In multi-vehicle tracking systems Kalman filter is generally used for tracking vehicles. Despite well known advantages of Kalman filter that presents optimality with constraints, it is difficult to track several vehicles in real time simultaneously due to a large number of computations. In this paper, we propose a multi-vehicle tracking system with an adaptive predictor that employs recursive least square algorithm which can be easily implemented for real time application on a transversal filter. The performance of the proposed tracking system is compared to one with Kalman filter using a synthetic sequential image generated by computer graphics and real sequential image taken at intersections. Simulation results show that the proposed tracking system can be applied to track vehicles in real sequential image at the rate of 30 frame/sec on a PC environments without any special hardwares.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.131.2-131
• /
• 2001

This paper's purpose i to obtain tracking information of an object using a camera. This system embodies to know tracking information of an object using Kalman filtering. As we use java program, it is possible to make system regardless of operating system, set up the system. We used an comfortable USB port camera everywhere without the capture board. We can use the internet by using the applet and JMF everywhere. We regard the camera as fixed.